Replacing the clutch on a 1960 GMC, SM-318 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chuck78 · 11-15-2009, 06:53 PM

Also found a shop here in town that shortens driveshafts for a really reasonable $65, and around $125 I think for aluminum (no warranty on aluminum mods on used shafts). They'll custom build a new driveshaft for you for $250 in steel and $400-$500 range for aluminum. Columbus Joint and Clutch. Then I just need to get the dial indicator to measure if I have any runout from my crank centerline to the bellhousing register for the transmission input bearing retainer, fab up a rear trans crossmember, and then get a speedometer adapter for the Tremec from the ford style to GM cable.

justcuz · 11-15-2009, 07:30 PM

Got you on the stability. Great that you found those other resources.

layingC10nK5 · 09-24-2016, 10:00 PM

Hey guys I'm helping a friend with his clutch on the same rare 305 v6 and we got the same wrong parts. Can you guys tell me what you ended up using. I cant find anything that works. Thanks.

Chuck78 · 09-25-2016, 07:45 AM

If you search 6066GMCclub.com, you'll find that the AMS Rhinopac 04-528 is the one to use. Don't use the Perfection brand that fits most of the same applications, as it will not fit the gmc. Use this brand only. Or just get the original clutch and pressure plate remanufactured. Hite Parts Exchange did an excellent job remanufacturing mine.

TJ's Chevy · 09-25-2016, 11:13 AM

Just did this folks. The AMS Clutch kit has the Same issue the rest do. But the nub on the flywheel side is not quite as tall. You will find that machining it down provides better results. Ask me how I know. Everything else is perfect except the disc. Also be aware that the clutch fork and throw out bearing have to also be in while you install the trans. Unless you have someway of collapsing the fingers. Due to the stupid small bell housing design Nothing is somewhat easy to install.

But when done the results are nice.

layingC10nK5 · 09-25-2016, 09:06 PM

Thanks guys. Unfortunately the shop that rebuilt the engine tossed out all the clutch parts and gave us new parts that dont fit. Now we're blindly trying different parts to see what works.

padresag · 09-25-2016, 09:39 PM

Quote:

Originally Posted by layingC10nK5

Thanks guys. Unfortunately the shop that rebuilt the engine tossed out all the clutch parts and gave us new parts that dont fit. Now we're blindly trying different parts to see what works.

someone should have some cores that you can get rebuilt. you might ask over on the GMC site. ther should be 305s sitting around that still have clutches on them.
it is the chevy bellhousing mounts that you can use
ron

TJ's Chevy · 09-25-2016, 11:46 PM

Quote:

Originally Posted by layingC10nK5

Thanks guys. Unfortunately the shop that rebuilt the engine tossed out all the clutch parts and gave us new parts that dont fit. Now we're blindly trying different parts to see what works.

You can get an AMS disc and then machine the nub down and it should work. Though I would recommend the whole kit so you have everything from one place. If I hadn't thrown my old disc away you could have had it for a rebuilable core, but I really don't know if it was rebuildable! haha It was pretty toasty.

padresag · 09-25-2016, 11:56 PM

Quote:

Originally Posted by TJ's Chevy

You can get an AMS disc and then machine the nub down and it should work. Though I would recommend the whole kit so you have everything from one place. If I hadn't thrown my old disc away you could have had it for a rebuilable core, but I really don't know if it was rebuildable! haha It was pretty toasty.

I always like the positiveness of the word "should"
ron

TJ's Chevy · 09-26-2016, 12:45 AM

Quote:

Originally Posted by padresag

I always like the positiveness of the word "should"
ron

Guaranteeing is a dangerous thing. Worked for me...Should work for him. But I will not be the one to say it Will work for him.

padresag · 09-26-2016, 07:30 PM

Quote:

Originally Posted by layingC10nK5

Thanks guys. Unfortunately the shop that rebuilt the engine tossed out all the clutch parts and gave us new parts that dont fit. Now we're blindly trying different parts to see what works.

I found a used clutch set if you are interested.the shop in the yard next to me has one. I got the engine him a few years back in case he ever needed another for his fork lift. A freind of mine had it before and put in a 350 with 4500 trans. he doesn't need the clutch as the forklift uses a different setup
ron

layingC10nK5 · 09-26-2016, 09:57 PM

Thanks for all the help guys. We ordered the kit already. Hopefully we get done with this and sit the motor in soon.

KIC · 06-01-2020, 08:56 PM

Going through the same with my 60 GMC .. This was really helpful.... I am waiting for a disc part number from a shop that actually solved this for a client a year or so ago... If I get it I will post it...

**Corts60** · 09-01-2020, 08:33 PM

Glad this thread is still alive and helping people out!

D'Monsta · 09-14-2022, 09:18 PM

I'll be doing my clutch disc this weekend.. Glad I found this thread..

11-15-2009, 06:53 PM	#26
Chuck78 Registered User Join Date: Apr 2005 Location: Columbus, OH Posts: 197	Re: Replacing the clutch on a 1960 GMC, SM-318 Also found a shop here in town that shortens driveshafts for a really reasonable $65, and around $125 I think for aluminum (no warranty on aluminum mods on used shafts). They'll custom build a new driveshaft for you for $250 in steel and $400-$500 range for aluminum. Columbus Joint and Clutch. Then I just need to get the dial indicator to measure if I have any runout from my crank centerline to the bellhousing register for the transmission input bearing retainer, fab up a rear trans crossmember, and then get a speedometer adapter for the Tremec from the ford style to GM cable. __________________ Chuck in Ohio 1962 GMC 1000 Panel Truck - 305D/Saginaw 4sp soon: 351C V6 + AX15 5sp OD trans, & 75-87/91 disc brake front end* 1988 Suzuki Samurai 4x4 project, VW 1.9L mTDI, Toyota R151F transmission & Toyota full floater axles, LWB body tub stretch project* Many 1977-1979 Suzuki GS motorcycles, Kawasaki KDX220R, '77 Suzuki PE250, etc Last edited by Chuck78; 11-15-2009 at 06:55 PM.*

11-15-2009, 07:30 PM	#27
justcuz Registered User Join Date: May 2008 Location: Alta Loma, Ca. Posts: 930	Re: Replacing the clutch on a 1960 GMC, SM-318 Got you on the stability. Great that you found those other resources.

09-24-2016, 10:00 PM	#28
layingC10nK5 Registered User Join Date: Jul 2009 Location: Los Angeles,CA Posts: 110	Re: Replacing the clutch on a 1960 GMC, SM-318 Hey guys I'm helping a friend with his clutch on the same rare 305 v6 and we got the same wrong parts. Can you guys tell me what you ended up using. I cant find anything that works. Thanks. Attached Images

09-25-2016, 07:45 AM	#29
Chuck78 Registered User Join Date: Apr 2005 Location: Columbus, OH Posts: 197	Re: Replacing the clutch on a 1960 GMC, SM-318 If you search 6066GMCclub.com, you'll find that the AMS Rhinopac 04-528 is the one to use. Don't use the Perfection brand that fits most of the same applications, as it will not fit the gmc. Use this brand only. Or just get the original clutch and pressure plate remanufactured. Hite Parts Exchange did an excellent job remanufacturing mine. __________________ Chuck in Ohio 1962 GMC 1000 Panel Truck - 305D/Saginaw 4sp soon: 351C V6 + AX15 5sp OD trans, & 75-87/91 disc brake front end* 1988 Suzuki Samurai 4x4 project, VW 1.9L mTDI, Toyota R151F transmission & Toyota full floater axles, LWB body tub stretch project* *Many 1977-1979 Suzuki GS motorcycles, Kawasaki KDX220R, '77 Suzuki PE250, etc

09-25-2016, 11:13 AM	#30
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Replacing the clutch on a 1960 GMC, SM-318 Just did this folks. The AMS Clutch kit has the Same issue the rest do. But the nub on the flywheel side is not quite as tall. You will find that machining it down provides better results. Ask me how I know. Everything else is perfect except the disc. Also be aware that the clutch fork and throw out bearing have to also be in while you install the trans. Unless you have someway of collapsing the fingers. Due to the stupid small bell housing design Nothing is somewhat easy to install. But when done the results are nice. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

09-25-2016, 09:06 PM	#31
layingC10nK5 Registered User Join Date: Jul 2009 Location: Los Angeles,CA Posts: 110	Re: Replacing the clutch on a 1960 GMC, SM-318 Thanks guys. Unfortunately the shop that rebuilt the engine tossed out all the clutch parts and gave us new parts that dont fit. Now we're blindly trying different parts to see what works.

09-26-2016, 09:57 PM	#37
layingC10nK5 Registered User Join Date: Jul 2009 Location: Los Angeles,CA Posts: 110	Re: Replacing the clutch on a 1960 GMC, SM-318 Thanks for all the help guys. We ordered the kit already. Hopefully we get done with this and sit the motor in soon.

06-01-2020, 08:56 PM	#38
KIC 1960 GMC Burb Join Date: Jan 2008 Location: Arizona Posts: 385	Re: Replacing the clutch on a 1960 GMC, SM-318 Going through the same with my 60 GMC .. This was really helpful.... I am waiting for a disc part number from a shop that actually solved this for a client a year or so ago... If I get it I will post it... __________________ 1960 GMC Suburban 1/2 ton V-6 2nd generation original owner 60 Burb Build thread: http://67-72chevytrucks.com/vboard/s...=1960+Suburban 60 to 66 Burbs only Thread: http://67-72chevytrucks.com/vboard/s...ighlight=burbs 2003 Tahoe LT

09-01-2020, 08:33 PM	#39
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,697	Re: Replacing the clutch on a 1960 GMC, SM-318 Glad this thread is still alive and helping people out! __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/showthread.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 73 Chevy C20(Daily)http://67-72chevytrucks.com/vboard/s...d.php?t=852767 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(sold)

09-14-2022, 09:18 PM	#40
D'Monsta Registered User Join Date: Aug 2020 Location: Charlotte Posts: 53	Re: Replacing the clutch on a 1960 GMC, SM-318 I'll be doing my clutch disc this weekend.. Glad I found this thread..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.