Are these the correct mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Thealien** · 11-20-2009, 08:02 PM

I want to replace all the mounts on my 72 Jimmy 350/350/NP 205. Are these the correct mounts for the adapter

http://www.energysuspensionparts.com...?prod=3%2E1106

And these for the transfer case to frame?

http://www.energysuspensionparts.com...?prod=3%2E1107

Can these be had rubber from auto parts stores?

OLDCHEV4X4 · 11-21-2009, 08:11 PM

Thats them.
I tryed the TC mounts from the auto parts store. They were too tall and made in India. I didn't like them, they didnt fit rite.

The torque mount bushings were not available. I had to go aftermarket.

11-20-2009, 08:02 PM	#1
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Are these the correct mounts I want to replace all the mounts on my 72 Jimmy 350/350/NP 205. Are these the correct mounts for the adapter http://www.energysuspensionparts.com...?prod=3%2E1106 And these for the transfer case to frame? http://www.energysuspensionparts.com...?prod=3%2E1107 Can these be had rubber from auto parts stores?

11-21-2009, 08:11 PM	#2
OLDCHEV4X4 Registered User Join Date: Apr 2000 Location: Chester County PA, USA Posts: 1,228	Re: Are these the correct mounts Thats them. I tryed the TC mounts from the auto parts store. They were too tall and made in India. I didn't like them, they didnt fit rite. The torque mount bushings were not available. I had to go aftermarket. __________________ 72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.