Front Sway Bar on 2x4? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

spinem · 01-13-2010, 12:25 AM

Was it factory to have one? Or an upgrade?... did mine get jacked in the middle of the night? Did my 500 dollar alarm system fail!?
thanks!

79gmcc15 · 01-13-2010, 12:45 AM

It was not "stock" it was a $20 add on so quite a few had them. Look at your spid and see if it had It on there. If you don't have the spid, look under there and look for the sway bar stands are there cause it didn't come from factory without one and they were rivited to the frame so likely it didn't get jacked. Check out the how to I did a few months ago to see what it would take to put one in and see if you have anything left Over.

79gmcc15 · 01-13-2010, 06:05 AM

here is the link. http://67-72chevytrucks.com/vboard/s...d.php?t=351586

Sorry if my last post kinda ran to gather. I was using my cell phone. lol

spinem · 01-14-2010, 12:21 AM

Thats some great info and an awesome build thread, thanks!!!

01-13-2010, 12:25 AM	#1
spinem haha, ford guys... Join Date: Feb 2007 Location: Visalia, CA Posts: 576	Front Sway Bar on 2x4? Was it factory to have one? Or an upgrade?... did mine get jacked in the middle of the night? Did my 500 dollar alarm system fail!? thanks!

01-13-2010, 12:45 AM	#2
79gmcc15 Gettin It One Pice At A Time Join Date: Oct 2004 Location: everett, washington Posts: 2,688	Re: Front Sway Bar on 2x4? It was not "stock" it was a $20 add on so quite a few had them. Look at your spid and see if it had It on there. If you don't have the spid, look under there and look for the sway bar stands are there cause it didn't come from factory without one and they were rivited to the frame so likely it didn't get jacked. Check out the how to I did a few months ago to see what it would take to put one in and see if you have anything left Over. __________________ RIP ELJAY Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby

01-13-2010, 06:05 AM	#3
79gmcc15 Gettin It One Pice At A Time Join Date: Oct 2004 Location: everett, washington Posts: 2,688	Re: Front Sway Bar on 2x4? here is the link. http://67-72chevytrucks.com/vboard/s...d.php?t=351586 Sorry if my last post kinda ran to gather. I was using my cell phone. lol __________________ RIP ELJAY Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby

01-14-2010, 12:21 AM	#4
spinem haha, ford guys... Join Date: Feb 2007 Location: Visalia, CA Posts: 576	Re: Front Sway Bar on 2x4? Thats some great info and an awesome build thread, thanks!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.