CA Parting out 84 Chevy 3/4 ton 4x4* - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 01-13-2010, 03:48 PM

Quote:

Originally Posted by mainermikeyd

that sounds good can i get some pics before you ship?? Thanks Mikey D

pics of fuse block

KrazyRay · 01-13-2010, 05:01 PM

Quote:

Originally Posted by ROLLIN' TOPLEZZ

Cant really see the connector to well but i think i need the newer one its has smaller connecting pins. Do you have a closer pic of connector where it connects to the crossover harness?

pics of door harness

ROLLIN' TOPLEZZ · 01-14-2010, 01:42 AM

Quote:

Originally Posted by KrazyRay

pics of door harness

Thats not the one i need do you have a newer one maybe the one from the 86 might work. This what the connector should look like.

KrazyRay · 01-14-2010, 01:46 AM

Quote:

Originally Posted by ROLLIN' TOPLEZZ

Thats not the one i need do you have a newer one maybe the one from the 86 might work. This what the connector should look like.

Sorry, my 86 power door harness was hacked off at the door jamb.

KrazyRay · 01-17-2010, 11:27 PM

700r4 cover

85burb · 01-19-2010, 08:45 PM

in post 3 you have part of the dash pad pictured. what does the silver trim that goes around the vents with the silverodo emblem how do they look if in good comdition how much for the trim and the emblem and 700r4 flywheel shipped to 75703.

KrazyRay · 01-19-2010, 11:08 PM

Quote:

Originally Posted by 85burb

in post 3 you have part of the dash pad pictured. what does the silver trim that goes around the vents with the silverodo emblem how do they look if in good comdition how much for the trim and the emblem and 700r4 flywheel shipped to 75703.

The dash trim is no good but the emblem is good. $5 for the emblem for a total of $40 shipped with the flywheel cover. Thanks, Ray

85burb · 01-19-2010, 11:43 PM

Quote:

Originally Posted by KrazyRay

The dash trim is no good but the emblem is good. $5 for the emblem for a total of $40 shipped with the flywheel cover. Thanks, Ray

dang man i just broke my trim thing today the end was sticking out so i tryed to pull the metle part off and it bent and the emblem broke in half. how bad is it? and do you have the front chrome that is by the head lights?

KrazyRay · 01-20-2010, 07:06 PM

Quote:

Originally Posted by 85burb

dang man i just broke my trim thing today the end was sticking out so i tryed to pull the metle part off and it bent and the emblem broke in half. how bad is it? and do you have the front chrome that is by the head lights?

My trim was bent in half but the emblem is good. The headlights had plastic bezels. I have the metal headlight retainer rings if that is what you are looking for. Thanks, Ray

85burb · 01-20-2010, 08:44 PM

i looking for the trim that goes all the way around the front.

KrazyRay · 01-21-2010, 06:04 PM

Quote:

Originally Posted by 85burb

i looking for the trim that goes all the way around the front.

Sorry, I don't have that trim. The truck was smashed up pretty good in the front.

85burb · 01-21-2010, 11:41 PM

sent pm about cover and emblem

ocbaud · 01-22-2010, 01:00 AM

i need the vent door for the passanger side and kick panel.

basically anything involving the passagner side kickpanel and the vent door.

like this:

http://i259.photobucket.com/albums/h...D/DSC00179.jpg

very interested. thanks

all the parts that are missing from this picture:
http://farm5.static.flickr.com/4029/...54b407bb_o.jpg

:-)

KrazyRay · 01-23-2010, 11:06 AM

Quote:

Originally Posted by ocbaud

i need the vent door for the passanger side and kick panel.

basically anything involving the passagner side kickpanel and the vent door.

like this:

http://i259.photobucket.com/albums/h...D/DSC00179.jpg

very interested. thanks

all the parts that are missing from this picture:
http://farm5.static.flickr.com/4029/...54b407bb_o.jpg

:-)

I have kick panels but they have speaker holes in them. Thanks, Ray

ocbaud · 01-23-2010, 02:16 PM

Quote:

Originally Posted by KrazyRay

I have kick panels but they have speaker holes in them. Thanks, Ray

thats fine

do you have the vent equipment on the passanger side? thats all i'm interested in.

KrazyRay · 01-23-2010, 09:18 PM

Quote:

Originally Posted by ocbaud

thats fine

do you have the vent equipment on the passanger side? thats all i'm interested in.

Yes, I have the vent assembly. $32 shipped. Thanks, Ray

bikes&bowties · 01-26-2010, 02:08 AM

Knowing you part out a lot of trucks. Do you have a PTO block off plate for an NP205?

chevyrestoguy · 01-27-2010, 10:17 AM

Do you have the upper metal shroud that goes on top of the radiator and bolts to both the core support and the shroud? Mine's an '83 1/2 ton, gas engine, if that makes any difference....

Also, did you ever sell the Q-Jet?

Alex

KrazyRay · 01-27-2010, 11:42 AM

Quote:

Originally Posted by bikes&bowties

Knowing you part out a lot of trucks. Do you have a PTO block off plate for an NP205?

I probably do. I will check.

KrazyRay · 01-27-2010, 11:50 AM

Quote:

Originally Posted by chevyrestoguy

Do you have the upper metal shroud that goes on top of the radiator and bolts to both the core support and the shroud? Mine's an '83 1/2 ton, gas engine, if that makes any difference....

Also, did you ever sell the Q-Jet?

Alex

Yes, Mine is for a 4 row radiator. I did not sell the carb yet because I'm still using it to test engines. Let me know what radiator you have and the measurement of your metal piece. Thanks, Ray

bikes&bowties · 01-28-2010, 02:59 AM

Quote:

Originally Posted by KrazyRay

I probably do. I will check.

Alright, thanks. Just let me know.

Sarge261 · 01-28-2010, 09:25 AM

Hey Ray,

Do you happen to have the gas tank brakets that bolt to the frame for a 85 K-20. It has a 20 gallon tank, its a 350, and a TH400.

If so let me know how much you would like, and if you could post a pic that would be great mine are rotted.

Thanks,

Sarge

KrazyRay · 01-28-2010, 11:07 AM

Quote:

Originally Posted by Sarge261

Hey Ray,

Do you happen to have the gas tank brakets that bolt to the frame for a 85 K-20. It has a 20 gallon tank, its a 350, and a TH400.

If so let me know how much you would like, and if you could post a pic that would be great mine are rotted.

Thanks,

Sarge

Yes, I have several sets. One of them came off an 84 K20 with 700r4 and one came off an 87 K20 with a 350 th400. I have over 30 gas tank brackets that are in good condition. I sell them for $10 per bracket plus shipping. A truck with dual tanks will need 4 brackets.
I think I have a pic on my parting 86 scottsdale thread post 95. Thanks, Ray

KrazyRay · 01-28-2010, 11:28 PM

Quote:

Originally Posted by bikes&bowties

Alright, thanks. Just let me know.

I have a np203 case. Will that block off plate work? LMK Thanks, Ray

Sarge261 · 01-29-2010, 09:57 AM

Hey Ray,

I'll take a set for the drivers side obly. Let me know how much to 12303 and I will transfer the money to my pay pal and get it out to you.

Sarge

01-17-2010, 11:27 PM	#80
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 84 Chevy 3/4 ton 4x4 700r4 cover Attached Images

01-19-2010, 08:45 PM	#81
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: Parting out 84 Chevy 3/4 ton 4x4 in post 3 you have part of the dash pad pictured. what does the silver trim that goes around the vents with the silverodo emblem how do they look if in good comdition how much for the trim and the emblem and 700r4 flywheel shipped to 75703. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

01-20-2010, 08:44 PM	#85
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: Parting out 84 Chevy 3/4 ton 4x4 i looking for the trim that goes all the way around the front. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

01-21-2010, 11:41 PM	#87
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: Parting out 84 Chevy 3/4 ton 4x4 sent pm about cover and emblem __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

01-22-2010, 01:00 AM	#88
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	Re: Parting out 84 Chevy 3/4 ton 4x4 i need the vent door for the passanger side and kick panel. basically anything involving the passagner side kickpanel and the vent door. like this: http://i259.photobucket.com/albums/h...D/DSC00179.jpg very interested. thanks all the parts that are missing from this picture: http://farm5.static.flickr.com/4029/...54b407bb_o.jpg :-)

01-26-2010, 02:08 AM	#92
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: Parting out 84 Chevy 3/4 ton 4x4* Knowing you part out a lot of trucks. Do you have a PTO block off plate for an NP205?

01-27-2010, 10:17 AM	#93
chevyrestoguy Registered User Join Date: Mar 2005 Location: apple valley, ca Posts: 2,670	Re: Parting out 84 Chevy 3/4 ton 4x4* Do you have the upper metal shroud that goes on top of the radiator and bolts to both the core support and the shroud? Mine's an '83 1/2 ton, gas engine, if that makes any difference.... Also, did you ever sell the Q-Jet? Alex Last edited by chevyrestoguy; 01-27-2010 at 10:18 AM.

01-28-2010, 09:25 AM	#97
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: Parting out 84 Chevy 3/4 ton 4x4* Hey Ray, Do you happen to have the gas tank brakets that bolt to the frame for a 85 K-20. It has a 20 gallon tank, its a 350, and a TH400. If so let me know how much you would like, and if you could post a pic that would be great mine are rotted. Thanks, Sarge __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

01-29-2010, 09:57 AM	#100
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: Parting out 84 Chevy 3/4 ton 4x4* Hey Ray, I'll take a set for the drivers side obly. Let me know how much to 12303 and I will transfer the money to my pay pal and get it out to you. Sarge __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.