TX BBC Motor Perch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AusTx68 · 01-22-2010, 10:23 PM

Pulled these off my 68' which had a 396. $25 buyer pays shipping.

**too much stuff** · 01-22-2010, 10:36 PM

Engine mounts? Interested pending a pic?

**leddzepp** · 01-22-2010, 10:38 PM

I will take them.

**too much stuff** · 01-22-2010, 10:38 PM

I will take them. Picture didn't load right away. Any other pieces from the engine? brackets? Shipping is to 55744 MN. Eric

AusTx68 · 01-22-2010, 11:00 PM

Quote:

Originally Posted by too much stuff

I will take them. Picture didn't load right away. Any other pieces from the engine? brackets? Shipping is to 55744 MN. Eric

Sorry no brackets but I do have a 454 Harmonic balancer, new water pump with pulley along with matching crank pulley. Also have a second set I took off my 396.

AusTx68 · 01-22-2010, 11:02 PM

Quote:

Originally Posted by leddzepp

I will take them.

Leddzepp was the first definite buyer. I will get back to you with shipping quote.

**too much stuff** · 01-22-2010, 11:05 PM

The second pics are from your 68 396? If so, how much for those pullies? Any other parts from the 68 you won't be using? Eric

AusTx68 · 01-22-2010, 11:07 PM

Quote:

Originally Posted by too much stuff

The second pics are from your 68 396? If so, how much for those pullies? Any other parts from the 68 you won't be using? Eric

Yes. If you just want the pulleys and not the water pump I will let you have them for $20. $30 with the water pump. The pump has less than 75 miles on it. Just has surface rust from sitting up.

*sharpie1972* · 01-22-2010, 11:15 PM

Great parts, great prices! I'll get in line on the pulleys and pump in case TOO MUCH STUFF decides he has "too much stuff" Thanks, Sharpie

AusTx68 · 01-22-2010, 11:18 PM

Quote:

Originally Posted by sharpie1972

Great parts, great prices! I'll get in line on the pulleys and pump in case TOO MUCH STUFF decides he has "too much stuff" Thanks, Sharpie

I take it you want the ones off the 396 not the 454?

*sharpie1972* · 01-22-2010, 11:19 PM

Yes, pulleys and pump if Too Much passes. Thanks, Sharpie

**too much stuff** · 01-22-2010, 11:24 PM

Quote:

Originally Posted by AusTx68

Yes. If you just want the pulleys and not the water pump I will let you have them for $20. $30 with the water pump. The pump has less than 75 miles on it. Just has surface rust from sitting up.

Will those fit in a large flat rate box with the pump? How long has the pump been sitting? Shipping is to 55744 MN. Figure with the pump and pullies from the 396. Also the engine mounts if they get to me i guess. Thanks.

AusTx68 · 01-22-2010, 11:36 PM

Quote:

Originally Posted by too much stuff

Will those fit in a large flat rate box with the pump? How long has the pump been sitting? Shipping is to 55744 MN. Figure with the pump and pullies from the 396. Also the engine mounts if they get to me i guess. Thanks.

Pump has been in my garage for a year. I will get back to you on shipping tomorrow. Leddzep got first dibs on the perchs.

**too much stuff** · 01-22-2010, 11:43 PM

I will take the other parts unless shipping is outragous. I think they may fit in a large flat rate box if that works for you. Eric

AusTx68 · 01-22-2010, 11:54 PM

Quote:

Originally Posted by too much stuff

I will take the other parts unless shipping is outragous. I think they may fit in a large flat rate box if that works for you. Eric

All the other parts or just the pulleys and pump from the 396?

**too much stuff** · 01-22-2010, 11:58 PM

Sorry for the confusion, just the pullies and pump from the 396. If you run across anything else for the 68, let me know.

AusTx68 · 01-23-2010, 12:07 AM

Quote:

Originally Posted by too much stuff

Sorry for the confusion, just the pullies and pump from the 396. If you run across anything else for the 68, let me know.

Got it. I will post the remaining BBC parts in a separate ad

ColinOpseth · 10-06-2011, 12:13 AM

Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

AusTx68 · 10-10-2011, 12:10 AM

Quote:

Originally Posted by ColinOpseth

Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

This is funny. Prior to your response the entire thread was 1 1/2 hrs from my first to last post. Nearly 22 months later you post this response

ColinOpseth · 10-10-2011, 12:19 AM

Heh.. I didn't notice the timestamp when I posted. I found a member on here that sold me a NOS set for my 70 big block shortbed resto. Thanks anyway.

01-22-2010, 10:23 PM	#1
AusTx68 Registered User Join Date: Nov 2008 Location: Italy Posts: 1,278	BBC Motor Perch Pulled these off my 68' which had a 396. $25 buyer pays shipping. __________________ '68 C-10 SWB 383 Stroker (Sold 3/2/2013) '87 R2500 LWB 454 TBI converted to Carb

01-22-2010, 10:36 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: BBC Motor Perch Engine mounts? Interested pending a pic? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-22-2010, 10:38 PM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: BBC Motor Perch I will take them. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

01-22-2010, 10:38 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: BBC Motor Perch I will take them. Picture didn't load right away. Any other pieces from the engine? brackets? Shipping is to 55744 MN. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-22-2010, 11:05 PM	#7
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: BBC Motor Perch The second pics are from your 68 396? If so, how much for those pullies? Any other parts from the 68 you won't be using? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-22-2010, 11:15 PM	#9
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: BBC Motor Perch Great parts, great prices! I'll get in line on the pulleys and pump in case TOO MUCH STUFF decides he has "too much stuff" Thanks, Sharpie

01-22-2010, 11:19 PM	#11
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: BBC Motor Perch Yes, pulleys and pump if Too Much passes. Thanks, Sharpie

01-22-2010, 11:43 PM	#14
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: BBC Motor Perch I will take the other parts unless shipping is outragous. I think they may fit in a large flat rate box if that works for you. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-22-2010, 11:58 PM	#16
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: BBC Motor Perch Sorry for the confusion, just the pullies and pump from the 396. If you run across anything else for the 68, let me know. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-06-2011, 12:13 AM	#18
ColinOpseth Registered User Join Date: Feb 2002 Location: Los Angeles, CA Posts: 283	Re: BBC Motor Perch Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here __________________ Webmaster: www.h-body.org Last edited by N2TRUX; 10-06-2011 at 10:40 AM.

10-10-2011, 12:19 AM	#20
ColinOpseth Registered User Join Date: Feb 2002 Location: Los Angeles, CA Posts: 283	Re: BBC Motor Perch Heh.. I didn't notice the timestamp when I posted. I found a member on here that sold me a NOS set for my 70 big block shortbed resto. Thanks anyway. __________________ Webmaster: www.h-body.org

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.