Dual exhaust/ tranny xmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bobs76 · 05-01-2003, 05:38 PM

Would anyone be interested in a new dual exhaust transmision crossmember? I am thinking of building a few. probably around $30 ea. plus shipping. I have one on my truck and will get a pic after the rain stops.

*rage'nrat638* · 05-01-2003, 07:21 PM

would be very interested in seeing a pic. of that baby,,,i am sure
you would be able to sell them.....your post looks like you want one...

Bobs76 · 05-01-2003, 10:45 PM

I will try to get a pic of mine tomorrow, we have had some bad storms around here today. I might build one saturday and post some pics of it.

Nvbowtie · 05-02-2003, 05:22 AM

Me to, I'd like to see that,

also ---

If you can make a Y pipe, my buddy is in need of one

(he is spliting his exhaust to go to side pipes, I think he needed 2" OD, what would that cost ?

Bill

**crossy** · 05-03-2003, 10:18 AM

me three. i was thinking of building some also. i used to do them for the GM 'G' body cars but for $30 I'll let you do it ! . DAVE

Bobs76 · 05-03-2003, 02:21 PM

I will get some pics up in a few hrs.

Marks 85 · 05-04-2003, 12:54 PM

See I told ya bob! That is a *****in crossmember You got, and alot of guys including me would like to ger our duels out of the weeds!

Bobs76 · 05-04-2003, 03:10 PM

I been real busy the last couple days but I will get a few pics up here in a few mins. Still got my motor tore down, got the new piston and gaskets but not done yet.

Bobs76 · 05-04-2003, 03:21 PM

OK I got pics, I know I need to clean things up under my truck so don't flame me about it. I just got the truck out of the bacyard and started to work on it after 3 yrs. I will build a crossmember one day this week and get nice pics of it if anyone is still interested. So here they are..

Bobs76 · 05-04-2003, 03:21 PM

2

Bobs76 · 05-04-2003, 03:25 PM

3

Bobs76 · 05-04-2003, 03:28 PM

4

Marks 85 · 05-04-2003, 04:30 PM

Hey yer tranny sure looks crooked!!!
Do ya grease yer undercarrage to keep it from rusting? LOL

Bobs76 · 05-04-2003, 04:56 PM

Not as much grease on mine as you have on yours...LOL
Get back to work and quite playin!!!!

wlarue72 · 05-04-2003, 05:27 PM

Hey Bob, I am interested. Send me an e-mail when you have time. I am not too far from you so I could come pick it up! Thanks David. sdkkdc1@attbi.com

**crossy** · 05-05-2003, 10:21 PM

count me in. it looks like you actually know how to weld too? LOL. DAVE

bigblock73 · 05-05-2003, 11:25 PM

I'm in too!!

me want me want! Keep me posted, my zip is 55448.

You do good work, look forward to hearing from you.

-Jeff

gchemist · 05-06-2003, 02:14 AM

I'll take one. Send me your address and the shipping costs + $30.00 to: Austin, TX 78741

I'm getting ready for my 350 so I need the dual exhaust!!

Bobs76 · 05-06-2003, 07:46 AM

Thanks guys, I will have them built and ready to ship by friday. I have to go do some work today to make up for my job now letting me go..

They will all be painted black unless you want me to leave them without paint. Let me know if that is OK.

gchemist · 05-06-2003, 06:00 PM

Black is okay with me. I may have it powder coated later. Sorry to hear about your work. Hey you ougth to try selling them on ebay too. I bet you could make a few extra bucks along the way.

I see you have a 350TH or 400th in the pictures. Mine is a 700R4 just in case you need to make it a little different.

Anyone want a 700R4 tranny crossmember when I put the new one on?

bigblock73 · 05-06-2003, 08:41 PM

I'll take mine black too. Sorry to hear about the job...hopefully something will turn up.

G, all crossmembers are the same, it is just the location on the frame that is different.

-Jeff

gchemist · 05-06-2003, 09:11 PM

Will this one bolt up to the stock holes or will I have to drill new ones?

**crossy** · 05-06-2003, 09:31 PM

black is fine. make me two of them, DAVE

Bobs76 · 05-06-2003, 11:30 PM

Well black it is then. They will bolt up to the factory holes, thats the way I wanted them. (Just Plug and Play if you will)
I have thought about putting them on e-bay. I think I could make a few extra bucks on there. I will be building them tomorrow and I can ship anytime after that. I do have a paypal acct if it will make it easier for anyone.
Also all crossmembers are the same its where they are bolted up at, ie: long tailshaft or short, 700r or 350,400. I have used several different trannys in trucks before.
Thanks for all the help and support guys, If I can ever return the favor I will...

wlarue72 · 05-06-2003, 11:57 PM

Bob, sent you an e-mail. Let me know when is a good time to pick one up. Thanks, David

05-01-2003, 05:38 PM	#1
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	Dual exhaust/ tranny xmember Would anyone be interested in a new dual exhaust transmision crossmember? I am thinking of building a few. probably around $30 ea. plus shipping. I have one on my truck and will get a pic after the rain stops. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-01-2003, 10:45 PM	#3
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	I will try to get a pic of mine tomorrow, we have had some bad storms around here today. I might build one saturday and post some pics of it. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-02-2003, 05:22 AM	#4
Nvbowtie Registered User Join Date: Jul 2001 Location: Laughlin, Nv. USA Posts: 700	Me to, I'd like to see that, also --- If you can make a Y pipe, my buddy is in need of one (he is spliting his exhaust to go to side pipes, I think he needed 2" OD, what would that cost ? Bill __________________ www.unlimited2u.com/chevy Bill 1980 Chevy C-10 Silverado 1988 Chevy Blazer Tahoe Last edited by Nvbowtie; 05-18-2003 at 07:11 PM.

05-03-2003, 10:18 AM	#5
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,042	me three. i was thinking of building some also. i used to do them for the GM 'G' body cars but for $30 I'll let you do it ! . DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww 84,C10 SWB-Yella,stock 86 K10 SWB-Red, hopped up 305,4/S LOTS of Cummins trucks.

05-03-2003, 02:21 PM	#6
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	I will get some pics up in a few hrs. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-01-2003, 07:21 PM	#2
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	would be very interested in seeing a pic. of that baby,,,i am sure you would be able to sell them.....your post looks like you want one...

05-04-2003, 12:54 PM	#7
Marks 85 Color By Krylon Join Date: Jan 2003 Location: Benbrook Tx. Posts: 179	See I told ya bob! That is a *****in crossmember You got, and alot of guys including me would like to ger our duels out of the weeds!

05-04-2003, 03:10 PM	#8
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	I been real busy the last couple days but I will get a few pics up here in a few mins. Still got my motor tore down, got the new piston and gaskets but not done yet. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-04-2003, 03:21 PM	#9
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	OK I got pics, I know I need to clean things up under my truck so don't flame me about it. I just got the truck out of the bacyard and started to work on it after 3 yrs. I will build a crossmember one day this week and get nice pics of it if anyone is still interested. So here they are.. Attached Images __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-04-2003, 03:21 PM	#10
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	2 Attached Images __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-04-2003, 03:25 PM	#11
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	3 Attached Images __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-04-2003, 03:28 PM	#12
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	4 Attached Images __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-04-2003, 04:30 PM	#13
Marks 85 Color By Krylon Join Date: Jan 2003 Location: Benbrook Tx. Posts: 179	Hey yer tranny sure looks crooked!!! Do ya grease yer undercarrage to keep it from rusting? LOL

05-04-2003, 04:56 PM	#14
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	Not as much grease on mine as you have on yours...LOL Get back to work and quite playin!!!! __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-04-2003, 05:27 PM	#15
wlarue72 Registered User Join Date: Nov 2002 Location: DFW Texas Posts: 244	Hey Bob, I am interested. Send me an e-mail when you have time. I am not too far from you so I could come pick it up! Thanks David. sdkkdc1@attbi.com __________________ 72 Cheyenne Super 402 daily driver. A lifetime project!



Register or Log In To remove these advertisements.

05-05-2003, 10:21 PM	#16
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,042	count me in. it looks like you actually know how to weld too? LOL. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww 84,C10 SWB-Yella,stock 86 K10 SWB-Red, hopped up 305,4/S LOTS of Cummins trucks.

05-05-2003, 11:25 PM	#17
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	I'm in too!! me want me want! Keep me posted, my zip is 55448. You do good work, look forward to hearing from you. -Jeff

05-06-2003, 02:14 AM	#18
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	I'll take one. Send me your address and the shipping costs + $30.00 to: Austin, TX 78741 I'm getting ready for my 350 so I need the dual exhaust!! __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

05-06-2003, 07:46 AM	#19
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	Thanks guys, I will have them built and ready to ship by friday. I have to go do some work today to make up for my job now letting me go.. They will all be painted black unless you want me to leave them without paint. Let me know if that is OK. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-06-2003, 06:00 PM	#20
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Black is okay with me. I may have it powder coated later. Sorry to hear about your work. Hey you ougth to try selling them on ebay too. I bet you could make a few extra bucks along the way. I see you have a 350TH or 400th in the pictures. Mine is a 700R4 just in case you need to make it a little different. Anyone want a 700R4 tranny crossmember when I put the new one on? __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos Last edited by gchemist; 05-06-2003 at 06:08 PM.

05-06-2003, 08:41 PM	#21
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	I'll take mine black too. Sorry to hear about the job...hopefully something will turn up. G, all crossmembers are the same, it is just the location on the frame that is different. -Jeff

05-06-2003, 09:11 PM	#22
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Will this one bolt up to the stock holes or will I have to drill new ones? __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

05-06-2003, 09:31 PM	#23
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,042	black is fine. make me two of them, DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww 84,C10 SWB-Yella,stock 86 K10 SWB-Red, hopped up 305,4/S LOTS of Cummins trucks.

05-06-2003, 11:30 PM	#24
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	Well black it is then. They will bolt up to the factory holes, thats the way I wanted them. (Just Plug and Play if you will) I have thought about putting them on e-bay. I think I could make a few extra bucks on there. I will be building them tomorrow and I can ship anytime after that. I do have a paypal acct if it will make it easier for anyone. Also all crossmembers are the same its where they are bolted up at, ie: long tailshaft or short, 700r or 350,400. I have used several different trannys in trucks before. Thanks for all the help and support guys, If I can ever return the favor I will... __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-06-2003, 11:57 PM	#25
wlarue72 Registered User Join Date: Nov 2002 Location: DFW Texas Posts: 244	Bob, sent you an e-mail. Let me know when is a good time to pick one up. Thanks, David __________________ 72 Cheyenne Super 402 daily driver. A lifetime project!

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode