CA Parting out 74 Chevy 3/4 ton 2wd* - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scootin 81 C20 · 02-04-2010, 12:23 AM

Ray, what is the switch by the ash tray for? Also, what kind of shape is the mirror inside in and does it mount to the windshield or to the headliner? I think it's the angle of the pic but it looks like the latter.

KrazyRay · 02-04-2010, 10:52 AM

Quote:

Originally Posted by Scootin 81 C20

Ray, what is the switch by the ash tray for? Also, what kind of shape is the mirror inside in and does it mount to the windshield or to the headliner? I think it's the angle of the pic but it looks like the latter.

The switch by the ashtray is the mechanical fuel changeover that was used in 74 instead of the problematic electric one. Its similar to a choke cable. Too bad the cable is broke. The mirror is cloudy and mounts on the windshield.

bigblock73 · 02-04-2010, 11:27 AM

Ray, payment sent for the parts. Thanks.

KrazyRay · 02-04-2010, 11:45 AM

Quote:

Originally Posted by bigblock73

Ray, payment sent for the parts. Thanks.

Thanks, will get mailed asap

KrazyRay · 02-04-2010, 06:38 PM

pic of mud guard.

bigblock73 · 02-04-2010, 07:22 PM

Perfect!! Just what I needed! Thanks Ray.

cowboy5683 · 02-04-2010, 07:28 PM

Hey Ray- Money sent via PayPal..Thanx again for the switch!!

dan76 · 02-04-2010, 07:29 PM

Can you shoot pics of the headers? What's the brand? What's your take on their conditon???rusted out, just rusty or scraped/crushed? If still available and depending on condition I'm in line.

*Stitch* · 02-04-2010, 07:57 PM

Quote:

Originally Posted by bigblock73

Perfect!! Just what I needed! Thanks Ray.

that's awesome...you finally found a set...

KrazyRay · 02-04-2010, 08:33 PM

Quote:

Originally Posted by Rogue_Sentinel

shipping 2 27030 ?

The shipping on the grill is $22. Thanks, Ray

CHROMAHOLIC · 02-04-2010, 09:15 PM

Hi Ray, I was wondering if you had a chance to check on the parts I pm'd you about....thanks

KrazyRay · 02-05-2010, 01:47 AM

Quote:

Originally Posted by CHROMAHOLIC

Hi Ray, I was wondering if you had a chance to check on the parts I pm'd you about....thanks

Sorry, I get many pms and it got lost. Which truck do you need the defrost vents from?

CHROMAHOLIC · 02-05-2010, 07:55 AM

mines a 77 so I am looking for the two in the top of the dash by the windshield as well as the duct that leads to them from the heater

KrazyRay · 02-05-2010, 10:58 PM

Quote:

Originally Posted by DBLSPRT68

Ray, let me know if the glide-out spare tire carrier is still there, and how much you want for it. Thanks, David

David, the tire carrier is still there...I don't know if its a glide-out. The one that's under there is $20 plus shipping. Thanks, Ray

DBLSPRT68 · 02-06-2010, 03:24 AM

Quote:

Originally Posted by KrazyRay

David, the tire carrier is still there...I don't know if its a glide-out. The one that's under there is $20 plus shipping. Thanks, Ray

Ray, could you get a picture of it when you have time. I have the standard tire carrier, but would like the glide out option. If you release the aft end and drop it down, the glide out holder will pull out to you. The standard one just drops to the ground, and you have to wrestle with the tire...... I'll take it if it's the glide out version! David

KrazyRay · 02-07-2010, 02:53 AM

Quote:

Originally Posted by CHROMAHOLIC

mines a 77 so I am looking for the two in the top of the dash by the windshield as well as the duct that leads to them from the heater

The 2 vents in the windshield were junk. Let me see if I have something from another truck. Thanks, Ray

CHROMAHOLIC · 02-07-2010, 07:43 AM

ok, thanks Ray...what about the duct to the vents was it any good....

KrazyRay · 02-07-2010, 10:07 AM

Quote:

Originally Posted by CHROMAHOLIC

ok, thanks Ray...what about the duct to the vents was it any good....

Sorry, I let it go with the cab sale. I have several cabs laying in the mud. I will see if I can find those parts. Thanks, Ray

Walts_restoration · 02-07-2010, 07:47 PM

Okay, need a few things, maybe from this truck or others.

73-74 grille mounting hardware and latch, want to convert my 77 over to the earlier style grille.

radiator overflow and the hose that leads to radiator for a 77.

Washer jug and bottle lid, and the filter that sits inside the jug.

Let me know. thanks.

KrazyRay · 02-08-2010, 02:07 AM

Quote:

Originally Posted by Walts_restoration

Okay, need a few things, maybe from this truck or others.

73-74 grille mounting hardware and latch, want to convert my 77 over to the earlier style grille.

radiator overflow and the hose that leads to radiator for a 77.

Washer jug and bottle lid, and the filter that sits inside the jug.

Let me know. thanks.

I will check Mon. Thanks, Ray

Walts_restoration · 02-08-2010, 02:10 AM

Sounds good

87Bob · 02-08-2010, 04:19 PM

Ray
Has it got the balance of the headliner trim I need?
Bob

KrazyRay · 02-08-2010, 11:05 PM

Quote:

Originally Posted by dan76

Can you shoot pics of the headers? What's the brand? What's your take on their conditon???rusted out, just rusty or scraped/crushed? If still available and depending on condition I'm in line.

The headers are in good condition. They could use some paint, but there are no dents in them. Will get pics soon. Thanks, Ray

KrazyRay · 02-08-2010, 11:11 PM

Quote:

Originally Posted by DBLSPRT68

Ray, could you get a picture of it when you have time. I have the standard tire carrier, but would like the glide out option. If you release the aft end and drop it down, the glide out holder will pull out to you. The standard one just drops to the ground, and you have to wrestle with the tire...... I'll take it if it's the glide out version! David

I have the glide out carrier out. It has some bends on it. Here is a pic:

KrazyRay · 02-09-2010, 01:01 AM

Quote:

Originally Posted by 87Bob

Ray
Has it got the balance of the headliner trim I need?
Bob

Bob, I think the pre 81 trucks have different trim.

02-04-2010, 12:23 AM	#26
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting out 74 Chevy 3/4 ton 2wd Ray, what is the switch by the ash tray for? Also, what kind of shape is the mirror inside in and does it mount to the windshield or to the headliner? I think it's the angle of the pic but it looks like the latter. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

02-04-2010, 11:27 AM	#28
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: Parting out 74 Chevy 3/4 ton 2wd Ray, payment sent for the parts. Thanks. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

02-04-2010, 06:38 PM	#30
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 74 Chevy 3/4 ton 2wd pic of mud guard. Attached Images

02-04-2010, 07:22 PM	#31
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: Parting out 74 Chevy 3/4 ton 2wd Perfect!! Just what I needed! Thanks Ray. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

02-04-2010, 07:28 PM	#32
cowboy5683 Registered User Join Date: Jun 2009 Location: San Bernardino CA Posts: 94	Re: Parting out 74 Chevy 3/4 ton 2wd Hey Ray- Money sent via PayPal..Thanx again for the switch!!

02-04-2010, 07:29 PM	#33
dan76 Registered User Join Date: Mar 2008 Location: Salt Lake City UT Posts: 441	Re: Parting out 74 Chevy 3/4 ton 2wd Can you shoot pics of the headers? What's the brand? What's your take on their conditon???rusted out, just rusty or scraped/crushed? If still available and depending on condition I'm in line.

02-04-2010, 09:15 PM	#36
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: Parting out 74 Chevy 3/4 ton 2wd Hi Ray, I was wondering if you had a chance to check on the parts I pm'd you about....thanks

02-05-2010, 07:55 AM	#38
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: Parting out 74 Chevy 3/4 ton 2wd mines a 77 so I am looking for the two in the top of the dash by the windshield as well as the duct that leads to them from the heater

02-07-2010, 07:43 AM	#42
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: Parting out 74 Chevy 3/4 ton 2wd* ok, thanks Ray...what about the duct to the vents was it any good....

02-07-2010, 07:47 PM	#44
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: Parting out 74 Chevy 3/4 ton 2wd* Okay, need a few things, maybe from this truck or others. 73-74 grille mounting hardware and latch, want to convert my 77 over to the earlier style grille. radiator overflow and the hose that leads to radiator for a 77. Washer jug and bottle lid, and the filter that sits inside the jug. Let me know. thanks. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

02-08-2010, 02:10 AM	#46
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: Parting out 74 Chevy 3/4 ton 2wd* Sounds good __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

02-08-2010, 04:19 PM	#47
87Bob Registered User Join Date: Nov 2007 Location: Franklin Indiana Posts: 635	Re: Parting out 74 Chevy 3/4 ton 2wd* Ray Has it got the balance of the headliner trim I need? Bob __________________ My Truck's not leaking its marking its territory!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.