MT Misc Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dlatulip · 02-26-2010, 09:01 PM

Need to make some more room and increase the the build fund$$

Keep looking on the 1st post. I will update/add/remove daily.

GM Corporate 10-bolt front (8.5-in. 30 Spline) Eaton E-locker. Axle completely gone through. Spare axle shafts. Less than 100 miles on it. 4.10 gears $800.

14Bolt FF Chevy rear axle 4.10 gears $100

Stock front tow hooks Chev $30 (2nd Gen)

205 Transfer Case from a 72 Blazer with adapter to 465 $100

465 Tranny $100

73-87 Truck Tailgate Bead blasted Some pitting Very straight. $75

Used Milemarker Hubs D44 Corp 10 Bolt $30

Raised Steering Arm $45

87 - 91 Blazer Suburban TBI Fuel Pump Brand new (Silla) $35

Wiper Motor Pulled from a 90 Blazer only used 2 Months $20

Dana 60 F Open Carrier $50

14SF 4:10 Ring and Pinion $50

AC compressor. (Newer model) Make a offer

Vortec Heads 60K miles on them. $200 plus the ride

700R4 to 241 adapter Will also work on a 208 to TH350 $45

Transmission Hard lines 700R4 90 Blazer. $65

Heater controls w/ac (2) Great shape $10 each..

Shortbox Bed rail caps/tailgate protector. $60

73-87 Door Hinge upper Brand new LH $15

95 S_Trucker · 02-26-2010, 11:51 PM

can you get some pics of the hubs please?

*Stitch* · 02-27-2010, 12:18 AM

can you get me a good picture of the knobs on the ac/heater controls...the one I have works fine, but the chrome is chipping off the knobs...thanks

BIGCHEVYMAN · 02-27-2010, 10:21 AM

pcs of the wiper motor please. thanks

dlatulip · 02-27-2010, 01:45 PM

Chrome is great on heater control knobs. No pits/peels.

Name: P1010160.jpg
Views: 323
Size: 42.7 KB

Name: P1010167.jpg
Views: 327
Size: 33.4 KB

Name: P1010170.jpg
Views: 324
Size: 33.7 KB

95 S_Trucker · 02-27-2010, 10:49 PM

thank you for the pictures of the hubs, but i will pass, im really looking for the ones with the black centers, and for 30 more i can get new ones, thanks again and good luck

*Stitch* · 02-27-2010, 11:36 PM

I will take the best looking one as long as it works like it's supposed to and I need it for an 84 A/C truck ...my zip is 29040...pm me your paypal and I'll send money ...thanks

bigdnew · 02-28-2010, 12:17 AM

are the heads complete and do you have pics and casting numbers. also do you have numbers for the ac compressor and pics.

dlatulip · 02-28-2010, 11:50 AM

Quote:

Originally Posted by bigdnew

are the heads complete and do you have pics and casting numbers. also do you have numbers for the ac compressor and pics.

The heads are complete with Valve covers. They were pulled with 60K on them. They are the 906 heads. The myth about the difference between the 906 and 062 is just that a myth.
The Compressor came with the Serpentine kit I bought from GM. It says 4344 on it. The kit instructions say 1134344.

Name: P1010171.jpg
Views: 281
Size: 49.0 KB

Name: P1010171.jpg
Views: 281
Size: 49.0 KB

Name: P1010174.jpg
Views: 292
Size: 38.5 KB

bigdnew · 02-28-2010, 12:30 PM

compressor will not work. will you do 200 including the ride to 38701

dlatulip · 02-28-2010, 02:45 PM

Quote:

Originally Posted by bigdnew

compressor will not work. will you do 200 including the ride to 38701

Shipping is going to be at least $75. Best I could do is $250 shipped.

bigdnew · 02-28-2010, 03:27 PM

pm sent

bigdnew · 02-28-2010, 05:33 PM

whatya think

dlatulip · 03-01-2010, 11:32 PM

Quote:

Originally Posted by bigdnew

whatya think

PM Sent.

rtabish · 03-02-2010, 02:22 PM

what does the tail gate look like? mine is functional, but a bit beat up, and the aluminum insert is...shall we say...a little tweaked. might be able to come over this weekend and get yours if it looks pretty good. any chance it is dark blue?

rtabish · 03-02-2010, 02:27 PM

what does the tail gate look like? mine is functional, but a bit beat up, and the aluminum insert is...shall we say...a little tweaked. might be able to come over this weekend and get yours if it looks pretty good.

dlatulip · 03-02-2010, 05:47 PM

Quote:

Originally Posted by rtabish

what does the tail gate look like? mine is functional, but a bit beat up, and the aluminum insert is...shall we say...a little tweaked. might be able to come over this weekend and get yours if it looks pretty good.

It is very straight. I would call the color "Natural"

I has been bead blasted. There a few blemishes from a little surface rust and someone welded up some holes that were drilled in it.

It will need to be painted.

It was for a project I was working on. I will put up some pics if you are intrested.

rtabish · 03-02-2010, 11:16 PM

other than prime and paint, is it ready to mount up...ie; all internal linkage intact and functional? are the weld spots flush or would they need grinding/sanding? maybe i had better see some pics.

dlatulip · 03-03-2010, 08:45 PM

Quote:

Originally Posted by rtabish

other than prime and paint, is it ready to mount up...ie; all internal linkage intact and functional? are the weld spots flush or would they need grinding/sanding? maybe i had better see some pics.

I would say it would need a little filler here and there. For a little more $$$ I can get it ready for paint. Filled and primered.

Bottom pic is not as bad as it looks. It does have some surface rust from sitting in the shed.

Name: P1010024.JPG
Views: 204
Size: 49.2 KB

Name: P1010024.JPG
Views: 204
Size: 49.2 KB

Name: P1010021.JPG
Views: 191
Size: 51.8 KB

Name: P1010020.JPG
Views: 192
Size: 46.4 KB

*Stitch* · 03-03-2010, 08:51 PM

heater control arrived today Dennis....thanks alot man...it's better than what I was expecting...looks brand new...also, it was packaged very very well...thanks again...

Chuck.

bigdnew · 03-03-2010, 11:38 PM

hey dennis gonna have to pass on the heads. picked up a 6.0 today with everything.

rtabish · 03-04-2010, 01:37 AM

Quote:

Originally Posted by dlatulip

I would say it would need a little filler here and there. For a little more $$$ I can get it ready for paint. Filled and primered.

eeyew...ya got "GMC" all over it!

i can do all that too, but i should probably do it to the tail gate i got already. thanks.
here i was looking for a reason to head over to Helena, too.

thanks, anyway. but i think i will have to pass

hotrod_991 · 03-04-2010, 09:34 AM

you wouldnt happen to go to the great falls area anytime in the near future would you? I am interested in the tail gate for my 77. Im sure I can do something about that GMC on there lol. If so let me know. My dad lives in vaughn but could meet you in great falls. Thanks

dlatulip · 03-04-2010, 10:31 AM

Quote:

Originally Posted by hotrod_991

you wouldnt happen to go to the great falls area anytime in the near future would you? I am interested in the tail gate for my 77. Im sure I can do something about that GMC on there lol. If so let me know. My dad lives in vaughn but could meet you in great falls. Thanks

Actually I will be heading up there in a week or so to pick up my motor from the machine shop.

Luckily you can use a tailgate band to cover up that "GMC" growth it has on it...

hotrod_991 · 03-04-2010, 10:36 AM

haha yea that is what I was think. do you know when you will be heading that way. date and ruff time. I would really like to get this from you. Do you have paypal? I am deplyed right now but would be able to get the money to my dad if need be. Thanks

02-26-2010, 09:01 PM	#1
dlatulip Registered User Join Date: Feb 2009 Location: Helena, Montana Posts: 104	Misc Parts Need to make some more room and increase the the build fund$$ Keep looking on the 1st post. I will update/add/remove daily. GM Corporate 10-bolt front (8.5-in. 30 Spline) Eaton E-locker. Axle completely gone through. Spare axle shafts. Less than 100 miles on it. 4.10 gears $800. 14Bolt FF Chevy rear axle 4.10 gears $100 Stock front tow hooks Chev $30 (2nd Gen) 205 Transfer Case from a 72 Blazer with adapter to 465 $100 465 Tranny $100 73-87 Truck Tailgate Bead blasted Some pitting Very straight. $75 Used Milemarker Hubs D44 Corp 10 Bolt $30 Raised Steering Arm $45 87 - 91 Blazer Suburban TBI Fuel Pump Brand new (Silla) $35 Wiper Motor Pulled from a 90 Blazer only used 2 Months $20 Dana 60 F Open Carrier $50 14SF 4:10 Ring and Pinion $50 AC compressor. (Newer model) Make a offer Vortec Heads 60K miles on them. $200 plus the ride 700R4 to 241 adapter Will also work on a 208 to TH350 $45 Transmission Hard lines 700R4 90 Blazer. $65 Heater controls w/ac (2) Great shape $10 each.. Shortbox Bed rail caps/tailgate protector. $60 73-87 Door Hinge upper Brand new LH $15 Last edited by dlatulip; 02-28-2010 at 02:41 PM.

02-26-2010, 11:51 PM	#2
95 S_Trucker Registered User Join Date: Oct 2009 Location: . Posts: 2,187	Re: Misc Parts can you get some pics of the hubs please?

02-27-2010, 12:18 AM	#3
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Misc Parts can you get me a good picture of the knobs on the ac/heater controls...the one I have works fine, but the chrome is chipping off the knobs...thanks

02-27-2010, 10:21 AM	#4
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: Misc Parts pcs of the wiper motor please. thanks

02-27-2010, 01:45 PM	#5
dlatulip Registered User Join Date: Feb 2009 Location: Helena, Montana Posts: 104	Re: Misc Parts Chrome is great on heater control knobs. No pits/peels. Last edited by dlatulip; 02-27-2010 at 01:47 PM.

02-27-2010, 10:49 PM	#6
95 S_Trucker Registered User Join Date: Oct 2009 Location: . Posts: 2,187	Re: Misc Parts thank you for the pictures of the hubs, but i will pass, im really looking for the ones with the black centers, and for 30 more i can get new ones, thanks again and good luck

02-27-2010, 11:36 PM	#7
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Misc Parts I will take the best looking one as long as it works like it's supposed to and I need it for an 84 A/C truck ...my zip is 29040...pm me your paypal and I'll send money ...thanks

02-28-2010, 12:17 AM	#8
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: Misc Parts are the heads complete and do you have pics and casting numbers. also do you have numbers for the ac compressor and pics. Last edited by bigdnew; 02-28-2010 at 12:23 AM.

02-28-2010, 12:30 PM	#10
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: Misc Parts compressor will not work. will you do 200 including the ride to 38701

02-28-2010, 03:27 PM	#12
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: Misc Parts pm sent

02-28-2010, 05:33 PM	#13
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: Misc Parts whatya think

03-02-2010, 02:22 PM	#15
rtabish Registered User Join Date: Feb 2010 Location: Missoula, Mt. Posts: 38	Re: Misc Parts what does the tail gate look like? mine is functional, but a bit beat up, and the aluminum insert is...shall we say...a little tweaked. might be able to come over this weekend and get yours if it looks pretty good. any chance it is dark blue? __________________ Rob Tabish 85 Chevy 1/2 ton LWB Silverado 77 Chevy El Camino Classic 81 Honda CB900F Super Sport 81 CB900 Custom http://i174.photobucket.com/albums/w...0/DSCN2024.jpg

03-02-2010, 02:27 PM	#16
rtabish Registered User Join Date: Feb 2010 Location: Missoula, Mt. Posts: 38	Re: Misc Parts what does the tail gate look like? mine is functional, but a bit beat up, and the aluminum insert is...shall we say...a little tweaked. might be able to come over this weekend and get yours if it looks pretty good. __________________ Rob Tabish 85 Chevy 1/2 ton LWB Silverado 77 Chevy El Camino Classic 81 Honda CB900F Super Sport 81 CB900 Custom http://i174.photobucket.com/albums/w...0/DSCN2024.jpg

03-02-2010, 11:16 PM	#18
rtabish Registered User Join Date: Feb 2010 Location: Missoula, Mt. Posts: 38	Re: Misc Parts other than prime and paint, is it ready to mount up...ie; all internal linkage intact and functional? are the weld spots flush or would they need grinding/sanding? maybe i had better see some pics. __________________ Rob Tabish 85 Chevy 1/2 ton LWB Silverado 77 Chevy El Camino Classic 81 Honda CB900F Super Sport 81 CB900 Custom http://i174.photobucket.com/albums/w...0/DSCN2024.jpg

03-03-2010, 08:51 PM	#20
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Misc Parts heater control arrived today Dennis....thanks alot man...it's better than what I was expecting...looks brand new...also, it was packaged very very well...thanks again... Chuck.



Register or Log In To remove these advertisements.

03-03-2010, 11:38 PM	#21
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: Misc Parts hey dennis gonna have to pass on the heads. picked up a 6.0 today with everything.

03-04-2010, 09:34 AM	#23
hotrod_991 Registered User Join Date: Jul 2009 Location: Thibodaux, LA Posts: 479	Re: Misc Parts you wouldnt happen to go to the great falls area anytime in the near future would you? I am interested in the tail gate for my 77. Im sure I can do something about that GMC on there lol. If so let me know. My dad lives in vaughn but could meet you in great falls. Thanks __________________ "Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint

03-04-2010, 10:36 AM	#25
hotrod_991 Registered User Join Date: Jul 2009 Location: Thibodaux, LA Posts: 479	Re: Misc Parts haha yea that is what I was think. do you know when you will be heading that way. date and ruff time. I would really like to get this from you. Do you have paypal? I am deplyed right now but would be able to get the money to my dad if need be. Thanks __________________ "Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.