converting from a 350 auto to manual T-56 trans

[twillie2460]

I will now start collecting all the parts I need to make this conversion. What would be the best way to get parts I need and what part will I need. Anyone know of what year of trucks I can get pedals out of the work in my 68 without a lot of mods needing to be done. All i have to this point is the trans, I have no hydraulics parts so info on good things to look for would be helpful.
I will also have to come up with a yoke to make the driveshaft with. I will see if the pic of the trans will load.
Upload File from your Computer



Upload File from a URL



Uploading File(s) - Please Wait
Attachment Key
Filetype Max Filesize Max Width Max Height
bmp 100.0 KB 642 -
doc 100.0 KB - -
gif 100.0 KB 642 -
jpe 100.0 KB 642 -
jpeg 100.0 KB 642 -
jpg 109.8 KB 642 -
pdf 178.1 KB - -
png 100.0 KB 642 -
psd 100.0 KB - -
txt 100.0 KB - -
zip 100.0 KB - -

[twillie2460]

What year of trucks or cars may look at for getting some of the stuff i need, pedal assembly, reservoir, slave cylinder linkage, just everything besides the trans that is.
I will be pulling my transmission out very soon. I hope to sell it even before being pulled. Just would like some insight as to where to start looking to find stuff.

[Sublvr72]

there are alot of variables on the T-56's. What car is the transmission coming from?

[twillie2460]

Originally Posted by Sublvr72

there are alot of variables on the T-56's. What car is the transmission coming from?

It came out of a 95 lt1 Camaro
and of couse going into a 68 short wide with an auto 350