NC WTB: "D" shaped O2 Sensor - The 1947 - Present Chevrolet & GMC Truck Message Board Network

atp · 03-09-2010, 09:12 PM

Hey guys - know it is a long shot but I need an O2 sensor with an end shaped for a plug like this for the Blazer project - anyone help a brother out

71swb4x4 · 03-09-2010, 09:24 PM

The most important part is that the sensor reads correctly for the computer, not that the plug is correct. Find the correct sensor, and then if the plug is wrong put that plug from the old sensor on it. On my 2005 van we ordered a GM sensor and they sent the wrong side so it had the wrong plug, the sensor itself was the same, so we pulled the pins from the new plug and put the old plug on the new sensor.

03-09-2010, 09:12 PM	#1
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	WTB: "D" shaped O2 Sensor Hey guys - know it is a long shot but I need an O2 sensor with an end shaped for a plug like this for the Blazer project - anyone help a brother out Attached Images

03-09-2010, 09:24 PM	#2
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: WTB: "D" shaped O2 Sensor The most important part is that the sensor reads correctly for the computer, not that the plug is correct. Find the correct sensor, and then if the plug is wrong put that plug from the old sensor on it. On my 2005 van we ordered a GM sensor and they sent the wrong side so it had the wrong plug, the sensor itself was the same, so we pulled the pins from the new plug and put the old plug on the new sensor. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.