Question about windshield sealing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69sixpackbee · 05-08-2003, 07:22 PM

Do I need to put sealant on the windshield when I reinstall it with the new rubber? If so, what do I use and where do I put it?
Thanx!

cruzn72 · 05-08-2003, 07:35 PM

I could not get the window on my 72 gmc to seal. I had the glass shop seal it. They sealed between the gasket and the window frame. They told me the frame has drain holes that become clogged or damaged (I do not know if this is true or not). I do not know what they used but it worked, I have not had a leak for 5+ years.

DanoDMano · 05-08-2003, 07:43 PM

Supposedly it is not needed. The rubber fits tight and is difficult to put in, so depending on the condition of the metal around your window you should be okay.

The first time we installed it the window got broken in the upper passenger side do to the tight fit. We used 3M window sealer and it made a mess.

The second window went in easier with no sealant, and it hasnt leaked yet.

Hope this helps. Just be sure to work the window and rubber in slowly and take your time.

69sixpackbee · 05-08-2003, 07:46 PM

I'm going the "let the gasket soak in the sun for a while and use the string and soapy water" method and was wondering if I needed "goop" Thinks I have my answer.
Thanx!
BTW DanoMano..I've been to your neck of the woods. My sister lived in Gig Harbor. Say, isn't Puyallup next to, dare I say, "'Till I cum"?

**old Rusty C10** · 05-08-2003, 08:33 PM

i got a friend at a body shop who told me to use that brown gasket junk to seal the windshield the downsides are ya gotta be careful not to get stuff on the paint as its hard to get off and the only way youll ever get that gasket off again is to mangle it SO next windshield youll have to get another gasket

DanoDMano · 05-08-2003, 08:50 PM

Too funny 69 1/2, Yeah thats the name. It is just a little north
of the "Skoo- Cum- Chuck" river....

He He....

Tuck · 05-08-2003, 10:00 PM

Just put the front and rear windshield in last night. I used Go Jo hand cleaner for lube. The old lady and me got both installed in 20 miniutes. with the rope trick.

Go jo is your friend. and cleaned the gasket real nice.

69sixpackbee · 05-09-2003, 11:34 AM

Go-jo it is..thanx Tuck, et. al..!

Tuck · 05-09-2003, 01:42 PM

dont forget the top goes in first, if you put the bottom in first you will break off the corner.

69sixpackbee · 05-09-2003, 01:45 PM

Thanx for the tip, Tuck! I was going to try bottom up.

bobs409 · 05-09-2003, 02:00 PM

Tuck; I'll send you my address. When can you get here to do mine?

stllookn · 05-09-2003, 02:16 PM

Tuck, Hey thanks for the tip. I have done my rear window...it is a piece of cake...took 5 minutes tops. I was reluctant to try the front. Can you just insert the entire top edge by sliding it up the front of the cab since the hole is bigger on the bottom or do you insert one corner first and start the rope work on top? Yu da man!

Tuck · 05-09-2003, 04:43 PM

Its top corner in them the other sides top corner. rope is centered on the top. start pulling one side while someone puts pressure on it from the outside. I do half the top then down one side, then half the top down one side then the bottom.

Hey PA guy, how far are you from Springdale? I will be out that way in a week or so. If your close I will bring the rope.

Boardrider52 · 05-09-2003, 06:18 PM

my dad owns a glass shop in phoenix and i think they put a cocking sealant between the window frame and the rubbers

Boardrider52 · 05-09-2003, 06:19 PM

you also have to really bang the window in there too get the seal down, and it takes a lot of force to break a windshield

Dads72 · 05-09-2003, 10:28 PM

The factory manual says to put some sealant on (in between) the top corners of the front windshield. Like maybe a 6" bead out from each corner.
The guys who put mine in said to leave it alone for awhile and let everything settle.
If you seal it when you first install it, the sealant could take a "set" and then crack the glass later on.
Don't know if this is right. Just telling you what I was told.
No sealant on mine yet - and no leaks.

05-08-2003, 07:22 PM	#1
69sixpackbee Registered User Join Date: Jan 2001 Location: Sabinal, Texas Posts: 1,706	Question about windshield sealing Do I need to put sealant on the windshield when I reinstall it with the new rubber? If so, what do I use and where do I put it? Thanx!

05-08-2003, 07:35 PM	#2
cruzn72 Registered User Join Date: Mar 2003 Posts: 99	window seal I could not get the window on my 72 gmc to seal. I had the glass shop seal it. They sealed between the gasket and the window frame. They told me the frame has drain holes that become clogged or damaged (I do not know if this is true or not). I do not know what they used but it worked, I have not had a leak for 5+ years.

05-08-2003, 07:43 PM	#3
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	Supposedly it is not needed. The rubber fits tight and is difficult to put in, so depending on the condition of the metal around your window you should be okay. The first time we installed it the window got broken in the upper passenger side do to the tight fit. We used 3M window sealer and it made a mess. The second window went in easier with no sealant, and it hasnt leaked yet. Hope this helps. Just be sure to work the window and rubber in slowly and take your time. __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

05-08-2003, 07:46 PM	#4
69sixpackbee Registered User Join Date: Jan 2001 Location: Sabinal, Texas Posts: 1,706	I'm going the "let the gasket soak in the sun for a while and use the string and soapy water" method and was wondering if I needed "goop" Thinks I have my answer. Thanx! BTW DanoMano..I've been to your neck of the woods. My sister lived in Gig Harbor. Say, isn't Puyallup next to, dare I say, "'Till I cum"? Last edited by 69sixpackbee; 05-08-2003 at 07:49 PM.

05-08-2003, 08:33 PM	#5
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	i got a friend at a body shop who told me to use that brown gasket junk to seal the windshield the downsides are ya gotta be careful not to get stuff on the paint as its hard to get off and the only way youll ever get that gasket off again is to mangle it SO next windshield youll have to get another gasket __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-08-2003, 08:50 PM	#6
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	Too funny 69 1/2, Yeah thats the name. It is just a little north of the "Skoo- Cum- Chuck" river.... He He.... __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

05-08-2003, 10:00 PM	#7
Tuck Registered User Join Date: Aug 2001 Location: pell city,AL Posts: 263	Just put the front and rear windshield in last night. I used Go Jo hand cleaner for lube. The old lady and me got both installed in 20 miniutes. with the rope trick. Go jo is your friend. and cleaned the gasket real nice.

05-09-2003, 11:34 AM	#8
69sixpackbee Registered User Join Date: Jan 2001 Location: Sabinal, Texas Posts: 1,706	Go-jo it is..thanx Tuck, et. al..!

05-09-2003, 01:42 PM	#9
Tuck Registered User Join Date: Aug 2001 Location: pell city,AL Posts: 263	dont forget the top goes in first, if you put the bottom in first you will break off the corner.

05-09-2003, 01:45 PM	#10
69sixpackbee Registered User Join Date: Jan 2001 Location: Sabinal, Texas Posts: 1,706	Thanx for the tip, Tuck! I was going to try bottom up.

05-09-2003, 02:00 PM	#11
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Tuck; I'll send you my address. When can you get here to do mine? __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

05-09-2003, 02:16 PM	#12
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Tuck, Hey thanks for the tip. I have done my rear window...it is a piece of cake...took 5 minutes tops. I was reluctant to try the front. Can you just insert the entire top edge by sliding it up the front of the cab since the hole is bigger on the bottom or do you insert one corner first and start the rope work on top? Yu da man! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

05-09-2003, 04:43 PM	#13
Tuck Registered User Join Date: Aug 2001 Location: pell city,AL Posts: 263	Its top corner in them the other sides top corner. rope is centered on the top. start pulling one side while someone puts pressure on it from the outside. I do half the top then down one side, then half the top down one side then the bottom. Hey PA guy, how far are you from Springdale? I will be out that way in a week or so. If your close I will bring the rope.

05-09-2003, 06:18 PM	#14
Boardrider52 Registered User Join Date: Feb 2003 Location: Phoenix, Arizona Posts: 212	my dad owns a glass shop in phoenix and i think they put a cocking sealant between the window frame and the rubbers __________________ 72' Jimmy member of Above~n~beyond truck club members.fortunecity.com/aboveandbeyondtrucks

05-09-2003, 06:19 PM	#15
Boardrider52 Registered User Join Date: Feb 2003 Location: Phoenix, Arizona Posts: 212	you also have to really bang the window in there too get the seal down, and it takes a lot of force to break a windshield __________________ 72' Jimmy member of Above~n~beyond truck club members.fortunecity.com/aboveandbeyondtrucks



Register or Log In To remove these advertisements.

05-09-2003, 10:28 PM	#16
Dads72 Registered User Join Date: Nov 2002 Posts: 427	The factory manual says to put some sealant on (in between) the top corners of the front windshield. Like maybe a 6" bead out from each corner. The guys who put mine in said to leave it alone for awhile and let everything settle. If you seal it when you first install it, the sealant could take a "set" and then crack the glass later on. Don't know if this is right. Just telling you what I was told. No sealant on mine yet - and no leaks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.