Cab Mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Baby John · 04-01-2010, 10:07 AM

I'm about to buy some rubber cab mounts from Brothers, and I was noticing that their add says that the kit does not come with spacers.

I'm not really sure what that means. Can someone help me with that? Do I need spacers?

Here's the kit I'm looking at.

http://www.brotherstrucks.com/prodin...number=CMS6772

my67chevytruck · 04-01-2010, 10:20 AM

They are referring to the crush sleeves, if yours are good i would clean them up and reuse them. you can see the sleeves in the picture at the link below.

http://gmcpauls.com/pictures/69-72ha...supportkit.jpg

Baby John · 04-01-2010, 10:24 AM

Quote:

Originally Posted by my67chevytruck

They are referring to the crush sleeves, if yours are good i would clean them up and reuse them. you can see the sleeves in the picture at the link below.

http://gmcpauls.com/pictures/69-72ha...supportkit.jpg

I think I may need to buy those sleeves too. I am pretty sure when I removed the cab I lost those. Seems like the rubber mounts on the rear of the cab stayed attached to the frame but the ones on the front stayed attached to the cab. Possibly just seized to them or something. I recall my paint guy telling me he had to drive those sleeves out for some reason.

my67chevytruck · 04-01-2010, 10:27 AM

usually they rust up pretty good, stick to the mounts etc after being attached all those years. you can see if brothers sells those sleeves seperate, or check with a board vendor for those or the complete kit.

mrh33916 · 04-01-2010, 10:36 AM

Mine was rusted pretty bad.

I would recommend a kit with the spacers.

Save the originals though to compare the height to the new ones.

The kit I got from CPP (I think, it's been a while) came with four spacers the same length (the fronts om my '67 were shorter than the rear). I didn't catch it until I was having problems lining up the front clip. Luckily I still had the originals in a box so I cut down the new ones to match the originals and everything lined up fine.

Baby John · 04-01-2010, 10:43 AM

Quote:

Originally Posted by my67chevytruck

They are referring to the crush sleeves, if yours are good i would clean them up and reuse them. you can see the sleeves in the picture at the link below.

http://gmcpauls.com/pictures/69-72ha...supportkit.jpg

OK, so I just need to buy this kit at GMC Pauls then, that includes the sleeves. Thanks. That helps alot.

Diablo de la Noche · 04-01-2010, 11:03 AM

I bought the spacers from Brothers without reading that they didn't come with sleeves. Had to buy the sleeves from LMC and ended up paying premium for the whole set. Could have got them at GMC Paul's for less. You will definitely need them.
(usless post, I know. I just had to post something!)

67chevemall · 04-01-2010, 12:36 PM

This is good to know, thanks. Cab Mounts are coming up...mine are all split

**72K20** · 04-01-2010, 12:59 PM

GMCPaul's is a much better option than Brothers. just my $.02 worth

Tx Firefighter · 04-01-2010, 03:44 PM

I always just cut new ones from a piece of round tubing. You can usually get a "drop" of tubing a few feet long for a buck or so at any steel yard.

dan42 · 04-01-2010, 03:47 PM

Brother's also doesn't tell you that the kit is not complete. Try ECE - complete kit and nice guys.

**leddzepp** · 04-01-2010, 04:34 PM

Quote:

Originally Posted by Baby John

I'm about to buy some rubber cab mounts from Brothers, and I was noticing that their add says that the kit does not come with spacers.

I'm not really sure what that means. Can someone help me with that? Do I need spacers?

Here's the kit I'm looking at.

http://www.brotherstrucks.com/prodin...number=CMS6772

Don't buy them from Brothers. Their kits are NOT complete right now. The counter guy there told me they are waiting on washers to complete it

He told me I could buy their kit and go to Home Depot and buy the washers

I went down the freeway to the Truck Shop and bought a complete body mount and core support kit (oem rubber) for $60 and am very happy with it.

67Mach1 · 04-01-2010, 04:42 PM

Quote:

Originally Posted by dan42

Brother's also doesn't tell you that the kit is not complete. Try ECE - complete kit and nice guys.

i agree which is why i wont deal with them again

04-01-2010, 10:07 AM	#1
Baby John Registered User Join Date: Jul 2007 Location: Mendenhall MS Posts: 222	Cab Mounts I'm about to buy some rubber cab mounts from Brothers, and I was noticing that their add says that the kit does not come with spacers. I'm not really sure what that means. Can someone help me with that? Do I need spacers? Here's the kit I'm looking at. http://www.brotherstrucks.com/prodin...number=CMS6772 __________________ Baby John & Tyler Shows My son and I are resto-rodding a '72 GMC Stepside

04-01-2010, 10:20 AM	#2
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Cab Mounts They are referring to the crush sleeves, if yours are good i would clean them up and reuse them. you can see the sleeves in the picture at the link below. http://gmcpauls.com/pictures/69-72ha...supportkit.jpg __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

04-01-2010, 10:27 AM	#4
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Cab Mounts usually they rust up pretty good, stick to the mounts etc after being attached all those years. you can see if brothers sells those sleeves seperate, or check with a board vendor for those or the complete kit. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

04-01-2010, 10:36 AM	#5
mrh33916 Project '67 454 Join Date: Jan 2009 Location: Columbia SC Posts: 283	Re: Cab Mounts Mine was rusted pretty bad. I would recommend a kit with the spacers. Save the originals though to compare the height to the new ones. The kit I got from CPP (I think, it's been a while) came with four spacers the same length (the fronts om my '67 were shorter than the rear). I didn't catch it until I was having problems lining up the front clip. Luckily I still had the originals in a box so I cut down the new ones to match the originals and everything lined up fine. __________________ 67 C-10 SWB Fleetside 454 (current project) 99 Crewcab SWB Dually 454 75 Datsun 280ZZ430 94 Formula 232LS 454

04-01-2010, 11:03 AM	#7
Diablo de la Noche Registered User Join Date: Jul 2009 Location: El Paso, Texas Posts: 142	Re: Cab Mounts I bought the spacers from Brothers without reading that they didn't come with sleeves. Had to buy the sleeves from LMC and ended up paying premium for the whole set. Could have got them at GMC Paul's for less. You will definitely need them. (usless post, I know. I just had to post something!) __________________ www.coolmoodart.com

04-01-2010, 12:36 PM	#8
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: Cab Mounts This is good to know, thanks. Cab Mounts are coming up...mine are all split __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

04-01-2010, 12:59 PM	#9
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: Cab Mounts GMCPaul's is a much better option than Brothers. just my $.02 worth

04-01-2010, 03:44 PM	#10
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Cab Mounts I always just cut new ones from a piece of round tubing. You can usually get a "drop" of tubing a few feet long for a buck or so at any steel yard. __________________ I'm on the Instagram- @Gearhead_Kevin

04-01-2010, 03:47 PM	#11
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: Cab Mounts Brother's also doesn't tell you that the kit is not complete. Try ECE - complete kit and nice guys. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.