Tucked in the rear bumper 3 inches - The 1947 - Present Chevrolet & GMC Truck Message Board Network

West Texas Z · 04-02-2010, 10:45 PM

My dad and I decided that my truck look horrible with the huge gap between the bumper and the bed....so we tucked it in. Opinions? Take in mind that I've had the truck 2 weeks only.

Before:

AFTER

West Texas Z · 04-02-2010, 10:47 PM

Also removed the horrible tint. It was purple!

SBTork · 04-02-2010, 10:50 PM

looks much, much better. Good work!

54Caddy · 04-02-2010, 11:07 PM

does the tailgate still open okay?

thepenguin99 · 04-02-2010, 11:10 PM

Looks infinitely better.

STOCKISH · 04-02-2010, 11:56 PM

Much better. I did the same on mine.

West Texas Z · 04-03-2010, 01:15 AM

Quote:

Originally Posted by 54Caddy

does the tailgate still open okay?

Yes it does. If I wanted to I can drop the tail gate slamming it down and it wont touch. After several adjustments, we got the fitment just right.

bigblock73 · 04-03-2010, 01:37 AM

Now you need to narrow the bumper to match the tuck...LoL, it sticks out too far side to side.

West Texas Z · 04-03-2010, 01:43 AM

Quote:

Originally Posted by bigblock73

Now you need to narrow the bumper to match the tuck...LoL, it sticks out too far side to side.

Like shorten the bumper?

dooce · 04-03-2010, 02:29 AM

He means the width. Look at where the bumper wraps around the bed, there is another gap there.

West Texas Z · 04-03-2010, 10:59 AM

Quote:

Originally Posted by dooce

He means the width. Look at where the bumper wraps around the bed, there is another gap there.

thats what I meant.

**N2TRUX** · 04-03-2010, 11:35 AM

Quote:

Originally Posted by bigblock73

Now you need to narrow the bumper to match the tuck...LoL, it sticks out too far side to side.

Can-O-worms buddy.... I analyzed this mod when we did it to my 82 Blazer. We determined that to make it look aesthetically correct you would need to narrow the width, AND section the ears.

If you hold up a 73-80 bumper, you will see what I mean. It's almost too short on the sides, but the 81-91 bumper look too long once it's pushed forward.

BTW- West Texas Z that does look good. Please ignore our anal retentive ramblings...

West Texas Z · 04-03-2010, 11:48 AM

Quote:

Originally Posted by N2TRUX

Can-O-worms buddy.... I analyzed this mod when we did it to my 82 Blazer. We determined that to make it look aesthetically correct you would need to narrow the width, AND section the ears.

If you hold up a 73-80 bumper, you will see what I mean. It's almost too short on the sides, but the 81-91 bumper look too long once it's pushed forward.

BTW- West Texas Z that does look good. Please ignore our anal retentive ramblings...

I see what you mean. Thanks for the explanation.

**N2TRUX** · 04-03-2010, 11:51 AM

Keep the progress reports coming...

bigblock73 · 04-03-2010, 03:03 PM

Quote:

Originally Posted by N2TRUX

Can-O-worms buddy.... I analyzed this mod when we did it to my 82 Blazer. We determined that to make it look aesthetically correct you would need to narrow the width, AND section the ears.

If you hold up a 73-80 bumper, you will see what I mean. It's almost too short on the sides, but the 81-91 bumper look too long once it's pushed forward.

BTW- West Texas Z that does look good. Please ignore our anal retentive ramblings...

You know me Ken, anal and a good can opener...LoL

I am currently trying to find a chrome shop that can assist me with re-chroming my bumpers, with filled bumper bolt holes. Sure, I could easily paint the bumper, but chrome looks soo much better..and those bumper bolts are an eyesore!

bigblock73 · 04-03-2010, 03:05 PM

Oh, one more thing...I decided not to tuck my bumper, but to build a full length gravel shield, and paint it body color...to tie the bumper to the truck better. Might go black with it too...but I don't know.

SCOTI · 04-03-2010, 03:25 PM

Quote:

Originally Posted by bigblock73

Oh, one more thing...I decided not to tuck my bumper, but to build a full length gravel shield, and paint it body color...to tie the bumper to the truck better. Might go black with it too...but I don't know.

Black.

bigblock73 · 04-03-2010, 03:28 PM

Quote:

Originally Posted by SCOTI

Black.

My decision might have gotten easier...LoL. Thanks.

Also, along the can-o-worms line Ken mentioned. I think if the rear gets tucked, the front should too...otherwise the job looks half finished IMO.

Unfortunately, that is a harder task to accomplish.

West Texas Z · 04-04-2010, 12:10 AM

Quote:

Originally Posted by bigblock73

My decision might have gotten easier...LoL. Thanks.

Also, along the can-o-worms line Ken mentioned. I think if the rear gets tucked, the front should too...otherwise the job looks half finished IMO.

Unfortunately, that is a harder task to accomplish.

The front already had a sweet stance.

Manbearpig · 04-04-2010, 08:42 AM

Looks great!

West Texas FTW

**N2TRUX** · 04-04-2010, 01:25 PM

Quote:

Originally Posted by bigblock73

.....I am currently trying to find a chrome shop that can assist me with re-chroming my bumpers, with filled bumper bolt holes....

Jeff you will need to tell your plater what you want to do. My understanding is it will be crucial to weld the holes with the proper wire/rod.

Once it is fairly smooth the plater will need to run it through the copper tank. Any imperfections will need to be welded up and smoothed again. One more through the copper tank to check for flaws and a good sanding. Then a final dip in copper before it goes to nickel, then chrome.

Another concern is ensure that the bolts welded on do nor bind or stress when tightened up. Any undue pressure will result in the bumper bolts showing through again.

But that's just what I hear...

bigblock73 · 04-04-2010, 02:39 PM

Quote:

Originally Posted by West Texas Z

The front already had a sweet stance.

I was referring to the "tuck" of the front bumper, not the stance of the truck. This whole thread is about the bumper tuck, and bumpers in general.

bigblock73 · 04-04-2010, 02:40 PM

Quote:

Originally Posted by N2TRUX

Jeff you will need to tell your plater what you want to do. My understanding is it will be crucial to weld the holes with the proper wire/rod.

Once it is fairly smooth the plater will need to run it through the copper tank. Any imperfections will need to be welded up and smoothed again. One more through the copper tank to check for flaws and a good sanding. Then a final dip in copper before it goes to nickel, then chrome.

Another concern is ensure that the bolts welded on do nor bind or stress when tightened up. Any undue pressure will result in the bumper bolts showing through again.

But that's just what I hear...

Thanks Ken, I'll have to ask those questions.

copperchevy · 04-04-2010, 03:37 PM

Quote:

Originally Posted by bigblock73

You know me Ken, anal and a good can opener...LoL

I am currently trying to find a chrome shop that can assist me with re-chroming my bumpers, with filled bumper bolt holes. Sure, I could easily paint the bumper, but chrome looks soo much better..and those bumper bolts are an eyesore!

Any interest in selling chrome smoothie bumpers? A chrome shop might give you a good deal if you bring them more than 2. I'm interested in getting one, im sure others would to.

West Texas Z · 04-04-2010, 04:44 PM

Quote:

Originally Posted by bigblock73

I was referring to the "tuck" of the front bumper, not the stance of the truck. This whole thread is about the bumper tuck, and bumpers in general.

04-02-2010, 10:45 PM	#1
West Texas Z El Mero Mero Frijolero!! Join Date: Mar 2010 Location: Lubbock, Texas Posts: 669	Tucked in the rear bumper 3 inches My dad and I decided that my truck look horrible with the huge gap between the bumper and the bed....so we tucked it in. Opinions? Take in mind that I've had the truck 2 weeks only. Before: AFTER __________________ My Toys: 1993 Ford Mustang LX 5.0 2001 Yamaha V Star 650 1984 Silverado > Build Page < Last edited by West Texas Z; 04-02-2010 at 10:52 PM.

04-02-2010, 10:47 PM	#2
West Texas Z El Mero Mero Frijolero!! Join Date: Mar 2010 Location: Lubbock, Texas Posts: 669	Re: Tucked in the rear bumper 3 inches Also removed the horrible tint. It was purple! __________________ My Toys: 1993 Ford Mustang LX 5.0 2001 Yamaha V Star 650 1984 Silverado > Build Page <

04-02-2010, 10:50 PM	#3
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: Tucked in the rear bumper 3 inches looks much, much better. Good work! __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

04-02-2010, 11:07 PM	#4
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: Tucked in the rear bumper 3 inches does the tailgate still open okay? __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

04-02-2010, 11:10 PM	#5
thepenguin99 Registered User Join Date: Mar 2004 Location: Millington TN Posts: 435	Re: Tucked in the rear bumper 3 inches Looks infinitely better.

04-02-2010, 11:56 PM	#6
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Tucked in the rear bumper 3 inches Much better. I did the same on mine. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

04-03-2010, 01:37 AM	#8
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: Tucked in the rear bumper 3 inches Now you need to narrow the bumper to match the tuck...LoL, it sticks out too far side to side. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

04-03-2010, 02:29 AM	#10
dooce Registered User Join Date: Aug 2007 Location: Tinker, OK Posts: 369	Re: Tucked in the rear bumper 3 inches He means the width. Look at where the bumper wraps around the bed, there is another gap there. __________________ 1976 Chevy 1/2T 2wd SWB 327/Saginaw 4spd 3.73:1 LQ4 6.0/T56 Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=772071 LFSalleeII@gmail.com

04-03-2010, 11:51 AM	#14
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Tucked in the rear bumper 3 inches Keep the progress reports coming... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

04-03-2010, 03:05 PM	#16
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: Tucked in the rear bumper 3 inches Oh, one more thing...I decided not to tuck my bumper, but to build a full length gravel shield, and paint it body color...to tie the bumper to the truck better. Might go black with it too...but I don't know. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 04-03-2010 at 03:05 PM.

04-04-2010, 08:42 AM	#20
Manbearpig Registered User Join Date: Mar 2009 Location: Midland, Tx Posts: 418	Re: Tucked in the rear bumper 3 inches Looks great! West Texas FTW __________________ 1972 GMC C10

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.