TX WTT - Napa lca bolts for stock ones! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kev2809** · 05-01-2010, 12:05 AM

i picked these up from napa, brand new never installed lower control arm u bolts with nuts. you are supposed to drill out the saddle holes to 5/8 to make these fit, they are a lot beefier than stock...i just really dont feel like enlarging the hole. so im looking to trade for some stock size lca u bolts, preferably new.

jsbgump · 05-01-2010, 01:10 AM

All the vendor have gone to the bigger size of u bolt. I orderd new ones from classic parts of america and recieved the larger ones. They get them straight from GM and said they dont offer the original 1/2 size anymore. Good luck on finding them new. If I find my old ones i would just mail them off to you.

Hottrucks · 05-01-2010, 07:28 AM

just call or check with a spring shop..they will make up anything you want..like if you wanted to add a lowering block or something...ussually about $50

**kev2809** · 05-02-2010, 12:40 PM

dang well that sucks..i dont have the receipt for these either lol

i guess ill leave this up for a little bit, maybe someone will stop by with some stock size ones

**kev2809** · 05-03-2010, 06:09 PM

ttt!

**kev2809** · 05-04-2010, 08:51 PM

bump!

**kev2809** · 05-09-2010, 01:47 PM

anybody?

jsbgump · 05-10-2010, 05:52 PM

I found my old used ones you can have

**kev2809** · 05-10-2010, 07:00 PM

can ya post some pics? what shape are they in? thanks

**kev2809** · 05-12-2010, 05:55 PM

ttt

dznucks · 05-13-2010, 08:31 AM

I just installed those on my front end rebuild and didnt have to drill anything out.
I threw my orignals away. sorry.

**kev2809** · 05-15-2010, 09:58 AM

really? maybe ill try again but when I tried the first time it seemed way to big

**kev2809** · 05-19-2010, 09:32 PM

well, they were too big so I returned them. anyone selling both sets or know what else I could use here or where I can get some?

edit - I fit a bolt that came with the suicide doors bag kit and it fit perfect so im guessing the aize is 3/8..

**kev2809** · 05-24-2010, 03:21 PM

still need some u bolts! anyone wanna send some my way? dont need to be brand new, used in great shape is fine also!

**Classic Heartbeat** · 05-24-2010, 03:45 PM

I would't feel confertable with used for this aplication. Those do receive a lot of stress and have been known to break. WES

**kev2809** · 05-24-2010, 04:05 PM

true. the ones i cut off looked like doo doo, good thing i didnt waste my time trying to unbolt them. seems like the custom made ones are expensive though, i was hoping someone had a set laying around they were not gonna use, maybe get lucky or something!

OARNGESI · 05-24-2010, 05:38 PM

Are you talking about the bolts to bolt the axle to the trailing arms

**kev2809** · 05-24-2010, 05:47 PM

I've got those with the drop blocks I bought

I need the ones for my lower control arms

**john** · 05-24-2010, 06:46 PM

I"ve seen one of the small ones break. Wouldn't use one on anything I cared about. Or anyONE I care about.

**kev2809** · 05-24-2010, 07:29 PM

so is enlarging the hole my only option?

**Classic Heartbeat** · 05-25-2010, 11:28 AM

Yes to go to the larger bolts you will need to enlarge the holes. That would be my first choice. WES

**kev2809** · 05-27-2010, 10:38 PM

anyone with the stockish size u bolts? i really need these! if i dont get anything by the end of tomorrow i will just go get the napa ones again and open up the hole i guess.

one more question, does anyone know if napa (or any auto parts store) would sell that same u bolt but in a smaller size?

05-01-2010, 12:05 AM	#1
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	WTT - Napa lca bolts for stock ones! i picked these up from napa, brand new never installed lower control arm u bolts with nuts. you are supposed to drill out the saddle holes to 5/8 to make these fit, they are a lot beefier than stock...i just really dont feel like enlarging the hole. so im looking to trade for some stock size lca u bolts, preferably new. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-01-2010, 01:10 AM	#2
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: WTT - Napa lca bolts for stock ones! All the vendor have gone to the bigger size of u bolt. I orderd new ones from classic parts of america and recieved the larger ones. They get them straight from GM and said they dont offer the original 1/2 size anymore. Good luck on finding them new. If I find my old ones i would just mail them off to you. __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

05-01-2010, 07:28 AM	#3
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: WTT - Napa lca bolts for stock ones! just call or check with a spring shop..they will make up anything you want..like if you wanted to add a lowering block or something...ussually about $50 __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

05-02-2010, 12:40 PM	#4
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: WTT - Napa lca bolts for stock ones! dang well that sucks..i dont have the receipt for these either lol i guess ill leave this up for a little bit, maybe someone will stop by with some stock size ones __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-03-2010, 06:09 PM	#5
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: WTT - Napa lca bolts for stock ones! ttt! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-04-2010, 08:51 PM	#6
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: WTT - Napa lca bolts for stock ones! bump! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-09-2010, 01:47 PM	#7
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: WTT - Napa lca bolts for stock ones! anybody? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-10-2010, 05:52 PM	#8
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: WTT - Napa lca bolts for stock ones! I found my old used ones you can have __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

05-10-2010, 07:00 PM	#9
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: WTT - Napa lca bolts for stock ones! can ya post some pics? what shape are they in? thanks __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-12-2010, 05:55 PM	#10
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: WTT - Napa lca bolts for stock ones! ttt __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-13-2010, 08:31 AM	#11
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: WTT - Napa lca bolts for stock ones! I just installed those on my front end rebuild and didnt have to drill anything out. I threw my orignals away. sorry.

05-15-2010, 09:58 AM	#12
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: WTT - Napa lca bolts for stock ones! really? maybe ill try again but when I tried the first time it seemed way to big __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-19-2010, 09:32 PM	#13
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: WTT - Napa lca bolts for stock ones! well, they were too big so I returned them. anyone selling both sets or know what else I could use here or where I can get some? edit - I fit a bolt that came with the suicide doors bag kit and it fit perfect so im guessing the aize is 3/8.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 05-19-2010 at 09:45 PM.

05-24-2010, 03:21 PM	#14
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: WTT - Napa lca bolts for stock ones! still need some u bolts! anyone wanna send some my way? dont need to be brand new, used in great shape is fine also! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-24-2010, 03:45 PM	#15
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: WTT - Napa lca bolts for stock ones! I would't feel confertable with used for this aplication. Those do receive a lot of stress and have been known to break. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys



Register or Log In To remove these advertisements.

05-24-2010, 04:05 PM	#16
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: WTT - Napa lca bolts for stock ones! true. the ones i cut off looked like doo doo, good thing i didnt waste my time trying to unbolt them. seems like the custom made ones are expensive though, i was hoping someone had a set laying around they were not gonna use, maybe get lucky or something! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-24-2010, 05:38 PM	#17
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: WTT - Napa lca bolts for stock ones! Are you talking about the bolts to bolt the axle to the trailing arms __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

05-24-2010, 05:47 PM	#18
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: WTT - Napa lca bolts for stock ones! I've got those with the drop blocks I bought I need the ones for my lower control arms __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-24-2010, 06:46 PM	#19
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: WTT - Napa lca bolts for stock ones! I"ve seen one of the small ones break. Wouldn't use one on anything I cared about. Or anyONE I care about. __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

05-24-2010, 07:29 PM	#20
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: WTT - Napa lca bolts for stock ones! so is enlarging the hole my only option? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-25-2010, 11:28 AM	#21
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: WTT - Napa lca bolts for stock ones! Yes to go to the larger bolts you will need to enlarge the holes. That would be my first choice. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

05-27-2010, 10:38 PM	#22
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: WTT - Napa lca bolts for stock ones! anyone with the stockish size u bolts? i really need these! if i dont get anything by the end of tomorrow i will just go get the napa ones again and open up the hole i guess. one more question, does anyone know if napa (or any auto parts store) would sell that same u bolt but in a smaller size? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.