WTB tool compartment door HINGES..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sakohntr · 05-22-2003, 12:53 PM

I need some hinges for my door. Just the hinges unless you want to part with a door as well. thanks

mtdave2 · 05-22-2003, 02:42 PM

i wish they would make an aftermarket door and hinge.. would have saved me lots of work.

**PICKMUP** · 05-22-2003, 07:08 PM

One of my customers got a stainless piano (not really off a piano) hinge. It went all the way across the bottom, so it didn't flex and let the door stick out at the bottom. I think it worked better than the original. I have never tried it, so can't tell the mods needed, but a nice end result.
A guy brought/sold me an NOS set about 5 years ago. He knew what he had=OUCH! I haven't had a truck good enugh to put them on, yet! I kind of use them so I know how to straighten the old used ones. I would show you a pic---but that would be cruel.

sakohntr · 05-22-2003, 09:10 PM

What would be crueler, the price to own em or the picture? I dont have a problem making some new ones, but i figured somebody had some laying around from one of those rotted out doors (no shortage of them). If anyone should own those nos ones it should be me. Afterall, there going on an NOS (yes nos) tool door. I'll keep lookin. Is there anything frank would like to trade for????????

**jerry moss** · 05-22-2003, 09:28 PM

Bruce,
i know where that door came from !!!!!!!!!! did you check with the guy you bought it from ??? he probably has a few spare hinges, he's parted a lot of these trucks.
you must have something Frank can't live without. he's teasing you something terrible--kinda like being stuck in a phone booth at a nude beach, you know it's there but you can't put your hands on it, lol.

JimKshortstep4x4 · 05-23-2003, 09:23 PM

If it would help you, I have two that you could have for $4 (to cover shipping). One is good, the other has a broken pin in it.
I never had the third one.

Jim

**too much stuff** · 05-23-2003, 09:37 PM

Bruce, slim chance, but maybe something on the longhorn yet. other option, the super i sold had one, and i know the guy just switched boxes last weekend. Maybe he still has it.

sakohntr · 05-24-2003, 09:10 AM

JimK i sent you a pm

**PICKMUP** · 05-27-2003, 03:20 AM

Hmmmmmmmmmm...Jerry Moss = tow hooks! That's a thought. Maybe some real nice 72 tow hooks. I would want to see pics. I make that mistake once already & got the wrong ones.

**jerry moss** · 05-27-2003, 10:09 AM

Frank,
you're really teasing Bruce now.lol.
i have a few sets of good used hinges--i also have 3 trucks with toolboxes, so i like to keep extras. N.O.S. would be nice though !!!!!!!!!!!!!!!!!
just kidding Bruce, i wouldn't try to buy/trade them, i know you need them badly.

**PICKMUP** · 05-27-2003, 11:57 AM

I wasn't trying to trade them to Jerry...his trade idea just reminded me of tow hooks. Bruce might have or find a set cheap in his area, that would make good trading items.

sakohntr · 05-27-2003, 09:42 PM

When i find an extra set of cheap tow hooks, youll be the first to know. I would rather fork out the cash. It would be faster.....

**PICKMUP** · 05-28-2003, 12:57 AM

Cash is too easy! I need help finding all of these "rare" hard to find parts. It is getting to be work coming up with the good stuff.

sakohntr · 05-28-2003, 09:14 PM

Come on now frank. You would have to sweeten the deal at least a little if i traded you some hooks. I will have to dig around and see what i can find. "pondering"

Class of 69 · 05-28-2003, 09:28 PM

My option sheet sau's it came with tow hooks, but they aren't on it......maybe Jerry has mine??!! Bruce, I PMed da-burb about the show at the Fair, but I didn't hear back from him yet. He was on here at that time, but maybe he left.

**PICKMUP** · 05-28-2003, 10:18 PM

OK, here they are. I think you can read the part # if you want to do a search. Note that "rare" Chevy parts basket---again!

sakohntr · 05-28-2003, 10:27 PM

Damn those are pretty. Frank, how about a dealer installed vacuum guage???

**too much stuff** · 05-29-2003, 12:08 AM

Bruce, the guy i told you about, thought he had the pieces you were looking for. He will be at my place thurs eve. I will try to get a price for you.

**too much stuff** · 05-30-2003, 12:54 PM

Bruce, i have a set of used hinges and latch assy. sitting in my garage. Let me know if you are interested. Eric

05-22-2003, 12:53 PM	#1
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	WTB tool compartment door HINGES..... I need some hinges for my door. Just the hinges unless you want to part with a door as well. thanks __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

05-22-2003, 02:42 PM	#2
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	i wish they would make an aftermarket door and hinge.. would have saved me lots of work. __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

05-22-2003, 07:08 PM	#3
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	One of my customers got a stainless piano (not really off a piano) hinge. It went all the way across the bottom, so it didn't flex and let the door stick out at the bottom. I think it worked better than the original. I have never tried it, so can't tell the mods needed, but a nice end result. A guy brought/sold me an NOS set about 5 years ago. He knew what he had=OUCH! I haven't had a truck good enugh to put them on, yet! I kind of use them so I know how to straighten the old used ones. I would show you a pic---but that would be cruel. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

05-22-2003, 09:10 PM	#4
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	oh come on What would be crueler, the price to own em or the picture? I dont have a problem making some new ones, but i figured somebody had some laying around from one of those rotted out doors (no shortage of them). If anyone should own those nos ones it should be me. Afterall, there going on an NOS (yes nos) tool door. I'll keep lookin. Is there anything frank would like to trade for???????? __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison. Last edited by sakohntr; 05-22-2003 at 09:15 PM.

05-22-2003, 09:28 PM	#5
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Bruce, i know where that door came from !!!!!!!!!! did you check with the guy you bought it from ??? he probably has a few spare hinges, he's parted a lot of these trucks. you must have something Frank can't live without. he's teasing you something terrible--kinda like being stuck in a phone booth at a nude beach, you know it's there but you can't put your hands on it, lol. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

05-23-2003, 09:23 PM	#6
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	If it would help you, I have two that you could have for $4 (to cover shipping). One is good, the other has a broken pin in it. I never had the third one. Jim

05-23-2003, 09:37 PM	#7
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Hinges. Bruce, slim chance, but maybe something on the longhorn yet. other option, the super i sold had one, and i know the guy just switched boxes last weekend. Maybe he still has it.

05-24-2003, 09:10 AM	#8
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	jimk JimK i sent you a pm __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

05-27-2003, 03:20 AM	#9
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Trade? Hmmmmmmmmmm...Jerry Moss = tow hooks! That's a thought. Maybe some real nice 72 tow hooks. I would want to see pics. I make that mistake once already & got the wrong ones. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

05-27-2003, 10:09 AM	#10
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Frank, you're really teasing Bruce now.lol. i have a few sets of good used hinges--i also have 3 trucks with toolboxes, so i like to keep extras. N.O.S. would be nice though !!!!!!!!!!!!!!!!! just kidding Bruce, i wouldn't try to buy/trade them, i know you need them badly. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

05-27-2003, 11:57 AM	#11
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	I wasn't trying to trade them to Jerry...his trade idea just reminded me of tow hooks. Bruce might have or find a set cheap in his area, that would make good trading items. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

05-27-2003, 09:42 PM	#12
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	frank When i find an extra set of cheap tow hooks, youll be the first to know. I would rather fork out the cash. It would be faster..... __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

05-28-2003, 12:57 AM	#13
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Cash is too easy! I need help finding all of these "rare" hard to find parts. It is getting to be work coming up with the good stuff. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

05-28-2003, 09:14 PM	#14
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	frank Come on now frank. You would have to sweeten the deal at least a little if i traded you some hooks. I will have to dig around and see what i can find. "pondering" __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

05-28-2003, 09:28 PM	#15
Class of 69 Registered User Join Date: Mar 2003 Location: Stillwater MN Posts: 1,166	My option sheet sau's it came with tow hooks, but they aren't on it......maybe Jerry has mine??!! Bruce, I PMed da-burb about the show at the Fair, but I didn't hear back from him yet. He was on here at that time, but maybe he left. __________________ 69 GMC K10 ..some restoration required....still..



Register or Log In To remove these advertisements.

05-28-2003, 10:18 PM	#16
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	SHOW & TELL OK, here they are. I think you can read the part # if you want to do a search. Note that "rare" Chevy parts basket---again! Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

05-28-2003, 10:27 PM	#17
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	damn Damn those are pretty. Frank, how about a dealer installed vacuum guage??? __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

05-29-2003, 12:08 AM	#18
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	hinges Bruce, the guy i told you about, thought he had the pieces you were looking for. He will be at my place thurs eve. I will try to get a price for you.

05-30-2003, 12:54 PM	#19
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	hinges Bruce, i have a set of used hinges and latch assy. sitting in my garage. Let me know if you are interested. Eric

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.