think these tubular upper arms are worth it? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dropt72Shortbed · 05-23-2003, 09:50 PM

just wondering if the camber and ball joint angles are that much of a problem on our trucks when they get real low. my truck is going to be on air and will more than likely be laying on the stock crossmember (not doing a crossmember drop). id like to have the ride height pretty low.

think these arms are worth it or not necessary?

http://www.performanceonline.com/suspension.html

Alexis · 05-23-2003, 10:12 PM

I didn't see a price. I would say yes. Why not improve your truck with some updated controlle arm design. I though there was another company out there that made upper tubular arms but with poly bushings? other then a little thought put into the arm you get a custom look which is always good IMO.

Hutch · 05-24-2003, 12:07 AM

These guy's make them too:
DJM Suspension

Have fun

cruzn72 · 05-24-2003, 06:49 PM

Is anyone using the DJM lower arms? I would like to get the truck lower and try not to use bags. Thanks for the info.

05-23-2003, 09:50 PM	#1
Dropt72Shortbed Registered User Join Date: May 2002 Location: Huntington Beach CA Posts: 678	think these tubular upper arms are worth it? just wondering if the camber and ball joint angles are that much of a problem on our trucks when they get real low. my truck is going to be on air and will more than likely be laying on the stock crossmember (not doing a crossmember drop). id like to have the ride height pretty low. think these arms are worth it or not necessary? http://www.performanceonline.com/suspension.html

05-24-2003, 12:07 AM	#3
Hutch Registered User Join Date: Oct 2001 Location: Grapevine, Tx. Posts: 2,142	These guy's make them too: DJM Suspension Have fun __________________ John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS

05-24-2003, 06:49 PM	#4
cruzn72 Registered User Join Date: Mar 2003 Posts: 99	Is anyone using the DJM lower arms? I would like to get the truck lower and try not to use bags. Thanks for the info. __________________ http://photos.yahoo.com/cruzn72@pacbell.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-23-2003, 10:12 PM	#2
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	I didn't see a price. I would say yes. Why not improve your truck with some updated controlle arm design. I though there was another company out there that made upper tubular arms but with poly bushings? other then a little thought put into the arm you get a custom look which is always good IMO.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.