How about some pics of '73-'87 Short Beds - Page 41 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Square84 · 12-10-2008, 03:21 PM

Quote:

Originally Posted by Smoke_Dog

Finally got a chance to take a good picture, since the truck got restored!

hey smoke what size tiger paws you runnin on that truck?

Smoke_Dog · 12-10-2008, 11:43 PM

Stock 15x8 with 60's,just like they did back in the day in North Carolina!!!
Nothing like 1970-1981 cars and trucks!!! I wish that I could find those old PLAYBOY Bunny air freshners. They were the BEST ever.

Quote:

Originally Posted by Square84

hey smoke what size tiger paws you runnin on that truck?

Tony_SS · 12-12-2008, 08:00 PM

Smoke Dog, are those 275/60's?

SBTork · 12-12-2008, 11:21 PM

hey vern350, where did you get that windshield decal? Very nice truck too.

killthewabbit · 12-14-2008, 01:44 AM

Quote:

Originally Posted by bricky69us

looking for someone to slam my 84 gmc. I live in Savannah tn would like to find someone close

I used to pass through Savannah a lot on my way to Memphis. Very pretty down there. Plus you guys have one of the best civil war sites I've ever visited.

Lucky for you, you're about an hour west of one of the best truck fab shops in the country.

Here you go:
http://www.friendlychopshop.com/

Beware - it ain't cheap.

vern350 · 12-14-2008, 12:35 PM

SBTork, I got the decal from the woodward dreamcruise in Detroit. Gm was handing them out left and right at their boths. This last cruise (2008), they did not hand them out. I got one 2006 and 2007.

Smoke_Dog · 12-14-2008, 02:20 PM

YES!!!
275 r 15 107s m+9

Quote:

Originally Posted by Tony_SS

Smoke Dog, are those 275/60's?

Tony_SS · 12-14-2008, 04:43 PM

Quote:

Originally Posted by Smoke_Dog

YES!!!
275 r 15 107s m+9

So what's the speed rating and tread depth on those?

spr85gmc · 12-16-2008, 01:42 AM

Quote:

Originally Posted by killthewabbit

I don't have any experience with them, no. I know they've gotten a few magazine features, though. Considering all the mini-trucking going on up here (huge show in Nashville every year, lots of minis but not just minis) I'm sure they do quite a bit of business. The same rules apply to small trucks as big ones. S10s are very close to the same suspension we have.

My advice would be to buy a dropmember and put it in if you're looking to spend that amount of money, though. I have a link to a square body build on another site (that competes with this one), but you don't have PMs enabled for me to be able to send it to you.

then send them my way

bmeredith · 12-20-2008, 02:27 PM

here's a couple pictures of one of my early chevys.
a couple weeks ago at greenhorn

pissing on my 38x13 after i put the 39.5 on

DirtyLarry · 12-22-2008, 11:44 AM

Got a fresh picture of mine yesterday.

Smoke_Dog · 12-22-2008, 04:19 PM

Quote:

Originally Posted by DirtyLarry

Got a fresh picture of mine yesterday.

Man that back ground give me the CHILLS from when I was stationed in Wyoming and South Dakota. Nice truck though!!!

Nukes16 · 12-29-2008, 02:53 PM

Hey guys, I'm new to the forum and Canadian...try not to hold that against me. I thought I'd try to post a picture of my 81 big block.
Cheers

flamingbig10 · 12-29-2008, 03:06 PM

Nice truck nuke, I like flames, if you can tell from my truck I like flames

Nukes16 · 12-30-2008, 01:17 AM

All right I'll try to post a couple of more pics.
Smokedog, I believe you a right, as far as a I can remember those are Stealth rims 20x8.5. They are a couple of years old now so I had a difficult time finding one more for a spare, but I did in the end. Hopefully one day there will be rear discs shining through!

heavychevy79 · 12-30-2008, 03:18 AM

I've been checkin out all the nice trucks on here and I thought I'd join in.
I've noticed this section has grown a bunch since the last time I looked.
Really great trucks guys!

I traded this 81 for a 79 short bed I didn't keep because of all of the rust
it had I didn't know about til I pulled up the carpet. I did a bad trade just to
get those round headlights. I don't think I have any pics of the 79.

I guess I'll stick to the long beds for now, those were the only shortbed I've had.
I've had a few long beds and I guess I like them better for some strange reason.
I've put up a pic with my 77 in the background too.

Nate.

83_383Stroker · 12-30-2008, 04:06 AM

heres some of my 83 swb

Tony_SS · 12-31-2008, 07:14 PM

Not mine - but check this one out!

thump16 · 12-31-2008, 11:35 PM

That truck is on LS1tech.com. The owner installed a LS1 set up and it came out sweet.

dgrayphotos · 01-01-2009, 07:56 PM

Great post. Here are some shots of my '87.

thump16 · 01-01-2009, 08:13 PM

Your truck looks good. Really clean.

watahyahknow · 01-01-2009, 08:17 PM

verry straight too , importand when you paint a truck gloss black

Chlsnk · 01-01-2009, 08:46 PM

The first two are of my truck and the last is one I got in a email attachment and once I get my step side bed I would like it to look like that.What do you think of the wire wheels there kind of growing on me.

83_383Stroker · 01-01-2009, 09:55 PM

Quote:

Originally Posted by Chlsnk

The first two are of my truck and the last is one I got in a email attachment and once I get my step side bed I would like it to look like that.What do you think of the wire wheels there kind of growing on me.

I am a firm believer in "to each his own" but personally wire wheels look kinda tacky. The ones on the stepper are *****in' though! If the wire wheels are your thing, roll em! But i think there are better options. Beautiful truck tho, lots of great potential! Good luck!

Chlsnk · 01-01-2009, 10:17 PM

Quote:

Originally Posted by 83_383Stroker

I am a firm believer in "to each his own" but personally wire wheels look kinda tacky. The ones on the stepper are *****in' though! If the wire wheels are your thing, roll em! But i think there are better options. Beautiful truck tho, lots of great potential! Good luck!

Yeah i'm not real big on the wires eather.They are what came on the truck when I got it and at least they arn't GOLD.

My ideal set up would be some 15x12 alloy slotted mags with mickey thompson street slicks and a mini tub with a step side bed.

12-12-2008, 08:00 PM	#1003
Tony_SS Registered User Join Date: Dec 2008 Location: Washington, MO Posts: 643	Re: How about some pics of '73-'87 Short Beds Smoke Dog, are those 275/60's?

12-12-2008, 11:21 PM	#1004
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: How about some pics of '73-'87 Short Beds hey vern350, where did you get that windshield decal? Very nice truck too. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

12-14-2008, 12:35 PM	#1006
vern350 like a rock Join Date: Nov 2004 Location: Ontario, Canada Posts: 517	Re: How about some pics of '73-'87 Short Beds SBTork, I got the decal from the woodward dreamcruise in Detroit. Gm was handing them out left and right at their boths. This last cruise (2008), they did not hand them out. I got one 2006 and 2007.

12-20-2008, 02:27 PM	#1010
bmeredith beer 1st, work 2nd Join Date: Jun 2008 Location: Sacramento, CA Posts: 78	Re: How about some pics of '73-'87 Short Beds here's a couple pictures of one of my early chevys. a couple weeks ago at greenhorn pissing on my 38x13 after i put the 39.5 on

12-22-2008, 11:44 AM	#1011
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	Re: How about some pics of '73-'87 Short Beds Got a fresh picture of mine yesterday. __________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram

12-29-2008, 02:53 PM	#1013
Nukes16 Registered User Join Date: Dec 2008 Location: Langley, BC Posts: 103	Re: How about some pics of '73-'87 Short Beds Hey guys, I'm new to the forum and Canadian...try not to hold that against me. I thought I'd try to post a picture of my 81 big block. Cheers Attached Images

12-29-2008, 03:06 PM	#1014
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: How about some pics of '73-'87 Short Beds Nice truck nuke, I like flames, if you can tell from my truck I like flames __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

12-30-2008, 01:17 AM	#1015
Nukes16 Registered User Join Date: Dec 2008 Location: Langley, BC Posts: 103	Re: How about some pics of '73-'87 Short Beds All right I'll try to post a couple of more pics. Smokedog, I believe you a right, as far as a I can remember those are Stealth rims 20x8.5. They are a couple of years old now so I had a difficult time finding one more for a spare, but I did in the end. Hopefully one day there will be rear discs shining through! Attached Images

12-30-2008, 03:18 AM	#1016
heavychevy79 Cheyenne Super Join Date: Nov 2008 Location: Dallas Texas Posts: 545	Re: How about some pics of '73-'87 Short Beds I've been checkin out all the nice trucks on here and I thought I'd join in. I've noticed this section has grown a bunch since the last time I looked. Really great trucks guys! I traded this 81 for a 79 short bed I didn't keep because of all of the rust it had I didn't know about til I pulled up the carpet. I did a bad trade just to get those round headlights. I don't think I have any pics of the 79. I guess I'll stick to the long beds for now, those were the only shortbed I've had. I've had a few long beds and I guess I like them better for some strange reason. I've put up a pic with my 77 in the background too. Nate. Attached Images

12-30-2008, 04:06 AM	#1017
83_383Stroker Registered User Join Date: Dec 2008 Location: Tulsa OK Posts: 59	Re: How about some pics of '73-'87 Short Beds heres some of my 83 swb Attached Images __________________ 83' internally ballanced 383 Stroker, 400 turbo 3800 stall , Posi, 750cfm carb, Weind manifold, long tube headers, and a handful of other goodies. Custom billet and woodgrain interior.

12-31-2008, 07:14 PM	#1018
Tony_SS Registered User Join Date: Dec 2008 Location: Washington, MO Posts: 643	Re: How about some pics of '73-'87 Short Beds Not mine - but check this one out! Attached Images

12-31-2008, 11:35 PM	#1019
thump16 Registered User Join Date: Jul 2005 Location: Valdosta GA Posts: 708	Re: How about some pics of '73-'87 Short Beds That truck is on LS1tech.com. The owner installed a LS1 set up and it came out sweet.

01-01-2009, 07:56 PM	#1020
dgrayphotos Registered User Join Date: Dec 2008 Location: Greer, SC Posts: 14	Re: How about some pics of '73-'87 Short Beds Great post. Here are some shots of my '87.

01-01-2009, 08:13 PM	#1021
thump16 Registered User Join Date: Jul 2005 Location: Valdosta GA Posts: 708	Re: How about some pics of '73-'87 Short Beds Your truck looks good. Really clean.

01-01-2009, 08:17 PM	#1022
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: How about some pics of '73-'87 Short Beds verry straight too , importand when you paint a truck gloss black __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts



Register or Log In To remove these advertisements.

01-01-2009, 08:46 PM	#1023
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: How about some pics of '73-'87 Short Beds The first two are of my truck and the last is one I got in a email attachment and once I get my step side bed I would like it to look like that.What do you think of the wire wheels there kind of growing on me. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.