68 S/C update..... - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70stroker · 07-02-2010, 04:22 PM

man i sure like that radiator cover. do you have a 69-72 front end laying around you could lay them on and see that would need to be done to fit them?

Trucks looking sweet

msgross · 07-02-2010, 05:08 PM

what I meant was that you really want fresh COLD air for that puppy to make make power. If all the air has to come through the radiator then it's going to be hot...

If there was a way to extend that air filter to reach fresh air (through the rad support or below it) then it would "seem" better... i'm not eninge pro though, just an observation...

**Hart_Rod** · 07-02-2010, 06:39 PM

Quote:

Originally Posted by 70stroker

man i sure like that radiator cover. do you have a 69-72 front end laying around you could lay them on and see that would need to be done to fit them?

Trucks looking sweet

When I put the burb back together, I'll take a look at that.

Quote:

Originally Posted by msgross

what I meant was that you really want fresh COLD air for that puppy to make make power. If all the air has to come through the radiator then it's going to be hot...

If there was a way to extend that air filter to reach fresh air (through the rad support or below it) then it would "seem" better... i'm not eninge pro though, just an observation...

I'm picking up what you're putting down,

, I will eventually try to plumb a "cold air" box for air intake. Which should make a big difference.

R/

**Hart_Rod** · 07-04-2010, 06:27 PM

Quote:

Originally Posted by ROB84

ROB! ITS ROBIE I USE TO HANG OUT AT TODDS HELP YA OUT A LIL!whats up buddy? i got a 84 gmc long bed and im wanting to do stuff to it! give me some hints of what i should to make it look good lol thanks man

How have things been going Robbie?

ROB84 · 07-06-2010, 11:06 AM

Theyve been pretty good! How about you rob? I see you have plenty of toys! Lol ill have to come see ya soon and check those out

**Hart_Rod** · 07-10-2010, 06:01 PM

Quote:

Originally Posted by ROB84

Theyve been pretty good! How about you rob? I see you have plenty of toys! Lol ill have to come see ya soon and check those out

Sounds good.

***

Well I finally got the new insulation and floormat installed. I can really tell the difference on the inside of the cab as far as heat and noise. This pretty well wraps up my interior "remodel",

. Just a few more little things and I can call this "Build" complete,

.

**Palf70Step** · 07-10-2010, 06:08 PM

Very Nice Rob!!

smbrouss70 · 07-10-2010, 06:10 PM

VA72C10 · 07-10-2010, 06:23 PM

Very cool interior....classy and all business at the same time!

eagleuh1 · 07-10-2010, 10:29 PM

Who sells that floor mat? Looks like its molded pretty tight. How do you like the quality and thickness of it?

**Hart_Rod** · 07-10-2010, 10:42 PM

Quote:

Originally Posted by Palf70Step

Very Nice Rob!!

Quote:

Originally Posted by smbrouss70

Quote:

Originally Posted by VA72C10

Very cool interior....classy and all business at the same time!

Thanks guys! It's simple but clean.

Quote:

Originally Posted by eagleuh1

Who sells that floor mat? Looks like its molded pretty tight. How do you like the quality and thickness of it?

I got it from Early Classic, but it came from one of their vendors but I'm not remember who. The quality and an thickness are great as well as the contours. It has a few air pockets, but that's mostly due to me using the Fatmat (double layer). I think they will go away after sitting the truck out in the sun for a few days.

eagleuh1 · 07-10-2010, 10:47 PM

Thanks for the info. I think thats what I'll be using in my farm truck, after I get the body work done with.

msgross · 07-10-2010, 11:00 PM

now what?

bigguy69 · 07-10-2010, 11:04 PM

where did you get the fat mat at?

jmedero · 07-10-2010, 11:45 PM

Truck looks sick Rob... especially pulling away at like 85mph!! LOL. I wont tell anyone how fast we actually went...

*Dylan · 07-11-2010, 12:36 AM

I really hope you weren't taking that picture as he was pulling away at 85 mph. Haha, crazy!

jmedero · 07-11-2010, 12:51 AM

well... um.... does it help if I say I had my seat belt on? Robs truck sounds like a jet taking off from behind it.

*Dylan · 07-11-2010, 12:53 AM

Haha, fair enough. Lol, if you PM me how fast ya went I won't tell a soul.

tommyd241 · 07-12-2010, 03:45 PM

Oh wow! That interior looks really nice!

**67cheby** · 07-12-2010, 03:48 PM

looks sweet , whats going on with the cupholder, is it attached , lets see some pics

jgh64pkup · 07-12-2010, 04:46 PM

Quote:

Originally Posted by jmedero

Truck looks sick Rob... especially pulling away at like 85mph!! LOL. I wont tell anyone how fast we actually went...

wow awesome pic
is that a mustang?
maybe a 69-70?

**Hart_Rod** · 07-12-2010, 06:05 PM

Quote:

Originally Posted by msgross

now what?

Quote:

Originally Posted by bigguy69

where did you get the fat mat at?

I ordered it off of their website. It's the same price that they list it on ebay.

Quote:

Originally Posted by jmedero

Truck looks sick Rob... especially pulling away at like 85mph!! LOL. I wont tell anyone how fast we actually went...

Quote:

Originally Posted by tommyd241

Oh wow! That interior looks really nice!

Thanks!

Quote:

Originally Posted by 67cheby

looks sweet , whats going on with the cupholder, is it attached , lets see some pics

Thanks. I got it at a boat shop. 2 machine screws hold it on. I posted pictures of the install a few pages back when I put my seats in.

Quote:

Originally Posted by jgh64pkup

wow awesome pic
is that a mustang?
maybe a 69-70?

Nova...

big_al_71 · 07-12-2010, 06:21 PM

wow I did my insulation the same exact way couple years ago huge difference!!!!

**67cheby** · 07-12-2010, 06:32 PM

i did the underneath of my cab with sprayin bedliner, do you think i will need to do this to my floor also or do you think the bedliner will kill all of my noise and heat ??

68 short step · 07-12-2010, 07:07 PM

looks great rob

07-02-2010, 04:22 PM	#401
70stroker Registered User Join Date: Jan 2007 Location: pittsburg kansas Posts: 894	Re: 68 S/C update..... man i sure like that radiator cover. do you have a 69-72 front end laying around you could lay them on and see that would need to be done to fit them? Trucks looking sweet __________________ 70 GMC build: http://67-72chevytrucks.com/vboard/s...d.php?t=613130 Last edited by 70stroker; 07-02-2010 at 04:22 PM.

07-02-2010, 05:08 PM	#402
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 S/C update..... what I meant was that you really want fresh COLD air for that puppy to make make power. If all the air has to come through the radiator then it's going to be hot... If there was a way to extend that air filter to reach fresh air (through the rad support or below it) then it would "seem" better... i'm not eninge pro though, just an observation... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-06-2010, 11:06 AM	#405
ROB84 Registered User Join Date: Jun 2010 Location: milton fl Posts: 17	Re: 68 S/C update..... Theyve been pretty good! How about you rob? I see you have plenty of toys! Lol ill have to come see ya soon and check those out

07-10-2010, 06:08 PM	#407
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,090	Re: 68 S/C update..... Very Nice Rob!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-10-2010, 06:10 PM	#408
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: 68 S/C update..... __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

07-10-2010, 06:23 PM	#409
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 68 S/C update..... Very cool interior....classy and all business at the same time! __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-10-2010, 10:29 PM	#410
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: 68 S/C update..... Who sells that floor mat? Looks like its molded pretty tight. How do you like the quality and thickness of it?

07-10-2010, 10:47 PM	#412
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: 68 S/C update..... Thanks for the info. I think thats what I'll be using in my farm truck, after I get the body work done with.

07-10-2010, 11:00 PM	#413
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 S/C update..... now what? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-10-2010, 11:04 PM	#414
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: 68 S/C update..... where did you get the fat mat at? __________________ members met: redbaron69, billsbowtie,nc67

07-10-2010, 11:45 PM	#415
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 S/C update..... Truck looks sick Rob... especially pulling away at like 85mph!! LOL. I wont tell anyone how fast we actually went... Attached Images __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

07-11-2010, 12:36 AM	#416
*Dylan Mean Buzzin' Half Dozen Join Date: Mar 2008 Location: Orlando, Florida Posts: 1,081	Re: 68 S/C update..... I really hope you weren't taking that picture as he was pulling away at 85 mph. Haha, crazy! __________________ "War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling which thinks that nothing is worth war is much worse. The person who has nothing for which he is willing to fight, nothing which is more important than his own personal safety, is a miserable creature and has no chance of being free unless made and kept so by the exertions of better men than himself." MY TRUCK (Now for sale) 1967 C10 SWB *Dylan* IIMY?

07-11-2010, 12:51 AM	#417
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 S/C update..... well... um.... does it help if I say I had my seat belt on? Robs truck sounds like a jet taking off from behind it. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

07-11-2010, 12:53 AM	#418
*Dylan Mean Buzzin' Half Dozen Join Date: Mar 2008 Location: Orlando, Florida Posts: 1,081	Re: 68 S/C update..... Haha, fair enough. Lol, if you PM me how fast ya went I won't tell a soul. __________________ "War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling which thinks that nothing is worth war is much worse. The person who has nothing for which he is willing to fight, nothing which is more important than his own personal safety, is a miserable creature and has no chance of being free unless made and kept so by the exertions of better men than himself." MY TRUCK (Now for sale) 1967 C10 SWB *Dylan* IIMY?

07-12-2010, 03:45 PM	#419
tommyd241 Registered User Join Date: May 2008 Location: 505 Posts: 447	Re: 68 S/C update..... Oh wow! That interior looks really nice! __________________ '68 SWB Fleetside '98 K1500 Silverado



Register or Log In To remove these advertisements.

07-12-2010, 03:48 PM	#420
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 68 S/C update..... looks sweet , whats going on with the cupholder, is it attached , lets see some pics __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-12-2010, 06:21 PM	#423
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 68 S/C update..... wow I did my insulation the same exact way couple years ago huge difference!!!! Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

07-12-2010, 06:32 PM	#424
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 68 S/C update..... i did the underneath of my cab with sprayin bedliner, do you think i will need to do this to my floor also or do you think the bedliner will kill all of my noise and heat ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-12-2010, 07:07 PM	#425
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: 68 S/C update..... looks great rob

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.