NC '87 Fuel injection harness and ECM - The 1947 - Present Chevrolet & GMC Truck Message Board Network

STOCKISH · 09-03-2010, 12:24 PM

I have a complete uncut TBI fuel injection harness and ECM from a 87 Crew Cab. The injector plugs are melted from a TBI backfire but the integrity of the wires are good and the connectors are available to replace these. Otherwise in great shape. ECM number 1227747. Was a running truck a few years ago but I have no way to test the ECM. Dont know what these normally go for so if my price is stupid and you're interested just make an offer. $100 shipped.

STOCKISH · 09-05-2010, 08:25 PM

Dont be afraid to make an offer, You mught be suprised. Need lots of stuff for my crew cab that I will trade for.

joe231 · 09-07-2010, 10:04 PM

so, all the connectors are good except the injectors?
what are you needing in trade?

70BLAZERX2 · 09-08-2010, 09:57 AM

what do you need for the crew cab? I parted out 4 suburbans and a crew not to long ago..have a bunch of stuff here. There is a 91 crewcab in a local yard 5 miles from me..nice ..missing motor/trans..and bed..rest is like new.

STOCKISH · 09-08-2010, 01:32 PM

I know my ECU and harness arent the same value wise but heres what I need. Really need nice interior pieces. Preferably grey or black. Need 4 non power doors( can trade my power doors but L/F has no regulator or motor, they were bad.) Tilt column, whatcha got.
The injector connectors are the only issue. The rest look good.

Jonboy · 09-08-2010, 02:35 PM

FWIW, the interior stuff is the same in the Suburban to above the rear doors. There is a small filler, then the rear cab trim is the same as in a pickup. The filler is about 2 inches long, and has a small dogleg in it.

70BLAZERX2 · 09-08-2010, 03:10 PM

I think i have a pair of rear manual doors off a 89 burb..I do have alot,i need to go look and see.

*Stitch* · 09-08-2010, 05:51 PM

I knew I forgot to take something outta the truck

Posted via Mobile Device

joe231 · 09-08-2010, 05:56 PM

I have some extra trim pieces that have been painted black

STOCKISH · 09-08-2010, 09:54 PM

I think i have all the interior trim for the headliner and such. Which pieces do you have? Chuck, do you need this?

*Stitch* · 09-08-2010, 10:05 PM

nope...just busting your balls...I have a whole TBI setup including rebuilt heads, manifolds, TB and everything that I'll probably put up for sale soon...not sure...

joe231 · 09-08-2010, 11:10 PM

Quote:

Originally Posted by 1972SuperCheyenne

I think i have all the interior trim for the headliner and such. Which pieces do you have? Chuck, do you need this?

I have the a-pillar trim, the long floor to ceiling trim between the front and rear doors, the long pieces over the doors, the piece across the top of the windshield, and the piece across the top of the back glass.
Oh I believe I have all the sill trim in aluminum also. i could get some of the rear corner trim pieces also if you need them, but they will be a different color. you could paint them all to match though

STOCKISH · 09-09-2010, 10:31 AM

I just looked and will need the A-pillar pieces, and the rear corner pieces. Mine have some screw holes punched through and I actually dont have the A-pillar pieces at all. I need to find a headliner board too.

STOCKISH · 09-12-2010, 01:09 PM

Bump it up!

STOCKISH · 09-14-2010, 01:46 PM

Will trade for the crew cab trim mentioned above, very nice cab clearance lights with wiring, etc... LMK whatcha got.

joe231 · 09-14-2010, 02:00 PM

You wanna trade for a-pillar and b-pillar(I guess it would be c-pillar on the crews)?
give me until this weekend so I can dig them out and take pics for you
Posted via Mobile Device

STOCKISH · 09-14-2010, 03:12 PM

Need the a pillar and c pillar(the very rear corners) for the CCSB. Need to find some nice rear and front seatbelts too.

joe231 · 09-14-2010, 03:36 PM

Sorry,
I don't have any seatbelts.
Thanks anyway.
Posted via Mobile Device

STOCKISH · 09-14-2010, 07:49 PM

I was just thinking out loud. Thats all that was. Any chance you have a headliner board for a crew?

joe231 · 09-14-2010, 08:16 PM

Not one I want to part with...
I was thinking Chuck picked up a headliner from Adam, no?
Maybe I got my members mixed up.
Posted via Mobile Device

STOCKISH · 09-14-2010, 08:45 PM

I dont know if he did or not. Let me know if you want to trade the trim pieces for the ECM and harness. Thanks man.

joe231 · 09-14-2010, 09:27 PM

Ok
I'm interested, let me dig them out and snap some pics this weekend so you can see them.
Posted via Mobile Device

STOCKISH · 09-14-2010, 09:33 PM

Sounds good.

*Stitch* · 09-14-2010, 10:40 PM

The headliner board never made it my way. If I remember correctly Adam couldn't find it or something like that. Can't really remember it's been quite a while.
Posted via Mobile Device

*Stitch* · 09-15-2010, 07:33 AM

Also I was just going to cover the roof inside with headliner material and pit the trim pieces up. Wasn't going to use a headliner board because you really don't need to. If you just cover the ceiling though you'll need to do something about the own head screws above the front seat. I was going to ou countersunk screws in there. Just FYI
Posted via Mobile Device

09-03-2010, 12:24 PM	#1
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	'87 Fuel injection harness and ECM I have a complete uncut TBI fuel injection harness and ECM from a 87 Crew Cab. The injector plugs are melted from a TBI backfire but the integrity of the wires are good and the connectors are available to replace these. Otherwise in great shape. ECM number 1227747. Was a running truck a few years ago but I have no way to test the ECM. Dont know what these normally go for so if my price is stupid and you're interested just make an offer. $100 shipped. Attached Images __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-05-2010, 08:25 PM	#2
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: '87 Fuel injection harness and ECM Dont be afraid to make an offer, You mught be suprised. Need lots of stuff for my crew cab that I will trade for. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-07-2010, 10:04 PM	#3
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '87 Fuel injection harness and ECM so, all the connectors are good except the injectors? what are you needing in trade? __________________ *CHEVY ONLY*

09-08-2010, 09:57 AM	#4
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: '87 Fuel injection harness and ECM what do you need for the crew cab? I parted out 4 suburbans and a crew not to long ago..have a bunch of stuff here. There is a 91 crewcab in a local yard 5 miles from me..nice ..missing motor/trans..and bed..rest is like new.

09-08-2010, 01:32 PM	#5
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: '87 Fuel injection harness and ECM I know my ECU and harness arent the same value wise but heres what I need. Really need nice interior pieces. Preferably grey or black. Need 4 non power doors( can trade my power doors but L/F has no regulator or motor, they were bad.) Tilt column, whatcha got. The injector connectors are the only issue. The rest look good. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-08-2010, 02:35 PM	#6
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: '87 Fuel injection harness and ECM FWIW, the interior stuff is the same in the Suburban to above the rear doors. There is a small filler, then the rear cab trim is the same as in a pickup. The filler is about 2 inches long, and has a small dogleg in it. __________________ 1974 Jimmy- 5.3/4L80e/NP241

09-08-2010, 03:10 PM	#7
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: '87 Fuel injection harness and ECM I think i have a pair of rear manual doors off a 89 burb..I do have alot,i need to go look and see.

09-08-2010, 05:51 PM	#8
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: '87 Fuel injection harness and ECM I knew I forgot to take something outta the truck Posted via Mobile Device

09-08-2010, 05:56 PM	#9
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '87 Fuel injection harness and ECM I have some extra trim pieces that have been painted black __________________ *CHEVY ONLY*

09-08-2010, 09:54 PM	#10
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: '87 Fuel injection harness and ECM I think i have all the interior trim for the headliner and such. Which pieces do you have? Chuck, do you need this? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. Last edited by STOCKISH; 09-08-2010 at 09:55 PM.

09-08-2010, 10:05 PM	#11
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: '87 Fuel injection harness and ECM nope...just busting your balls...I have a whole TBI setup including rebuilt heads, manifolds, TB and everything that I'll probably put up for sale soon...not sure...

09-09-2010, 10:31 AM	#13
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: '87 Fuel injection harness and ECM I just looked and will need the A-pillar pieces, and the rear corner pieces. Mine have some screw holes punched through and I actually dont have the A-pillar pieces at all. I need to find a headliner board too. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. Last edited by STOCKISH; 09-09-2010 at 10:34 AM.

09-12-2010, 01:09 PM	#14
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: '87 Fuel injection harness and ECM Bump it up! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-14-2010, 01:46 PM	#15
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: '87 Fuel injection harness and ECM Will trade for the crew cab trim mentioned above, very nice cab clearance lights with wiring, etc... LMK whatcha got. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-14-2010, 02:00 PM	#16
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '87 Fuel injection harness and ECM You wanna trade for a-pillar and b-pillar(I guess it would be c-pillar on the crews)? give me until this weekend so I can dig them out and take pics for you Posted via Mobile Device __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

09-14-2010, 03:12 PM	#17
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: '87 Fuel injection harness and ECM Need the a pillar and c pillar(the very rear corners) for the CCSB. Need to find some nice rear and front seatbelts too. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-14-2010, 03:36 PM	#18
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '87 Fuel injection harness and ECM Sorry, I don't have any seatbelts. Thanks anyway. Posted via Mobile Device __________________ *CHEVY ONLY*

09-14-2010, 07:49 PM	#19
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: '87 Fuel injection harness and ECM I was just thinking out loud. Thats all that was. Any chance you have a headliner board for a crew? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-14-2010, 08:16 PM	#20
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '87 Fuel injection harness and ECM Not one I want to part with... I was thinking Chuck picked up a headliner from Adam, no? Maybe I got my members mixed up. Posted via Mobile Device __________________ *CHEVY ONLY*

09-14-2010, 08:45 PM	#21
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: '87 Fuel injection harness and ECM I dont know if he did or not. Let me know if you want to trade the trim pieces for the ECM and harness. Thanks man. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-14-2010, 09:27 PM	#22
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '87 Fuel injection harness and ECM Ok I'm interested, let me dig them out and snap some pics this weekend so you can see them. Posted via Mobile Device __________________ *CHEVY ONLY*

09-14-2010, 09:33 PM	#23
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: '87 Fuel injection harness and ECM Sounds good. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-14-2010, 10:40 PM	#24
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: '87 Fuel injection harness and ECM The headliner board never made it my way. If I remember correctly Adam couldn't find it or something like that. Can't really remember it's been quite a while. Posted via Mobile Device

09-15-2010, 07:33 AM	#25
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: '87 Fuel injection harness and ECM Also I was just going to cover the roof inside with headliner material and pit the trim pieces up. Wasn't going to use a headliner board because you really don't need to. If you just cover the ceiling though you'll need to do something about the own head screws above the front seat. I was going to ou countersunk screws in there. Just FYI Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.