WY 1969 K10 4x4 skid plate - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 09-05-2010, 08:42 PM

From a 1969 K10 4x4 suburban. Correct for trucks, subs, blazers and K20 rigs. Mounts behind the Rockwell T-case in the carrier bearing area. This one is in exceptional shape with correct spacer blocks. No rock dings or other damage. Hard to find piece!
$125 shipped. Thanks, Sharpie

Patsfan34 · 09-06-2010, 08:13 AM

I have one of these and very happy about it! Anyone restoring a 4x4 should be in the market for this item.

*sharpie1972* · 11-23-2010, 09:25 PM

New price $125 shipped. Sharpie

*sharpie1972* · 01-23-2011, 12:01 AM

....

**jerry moss** · 01-23-2011, 12:39 AM

i've got a few of those in storage from my "parting out" days. just an extra piece of info- if you remove the little skid plate, the crossmember is the same as the one used with the 70-72 factory skid plate the protects the t-case. there is a board member that made up a bunch of factory looking 70-72 skid plates a few years back and i bought 5 of them from him and plan on using the 67-69 crossmember like the one sharpie has. i compared the crossmember to my factory 72 unit and it's identical. not trying to hijack sharpie's post, just adding a little bit of info.

**KSCHEVYUP** · 01-23-2011, 09:49 AM

Does anyone have a picture of the correct transfer case skid plate for a 70-72?
Thanks
Ron

**jerry moss** · 01-23-2011, 09:58 AM

i haven't hooked up my camera since i got my computer out of the shop so i can't post pics. maybe try doing a search of older posts. it is basicly a thick steel plate with a little wahoo in it between the trans crossmember and the second crossmember, underneath your 205.

*sharpie1972* · 01-23-2011, 10:17 AM

Here you go, since it did start as my thread! Installed and off including part #. This is not for sale. Only showing pics for reference. Thanks, Sharpie

*sharpie1972* · 01-23-2011, 10:18 AM

....

**KSCHEVYUP** · 01-23-2011, 10:23 AM

Sharpie-
Thanks for the pictures.
That clears up all questions.

And my apologies for using your thread.
Right after I pushed the submit button; I thought to myself
"I done that wrong"
Ron

*sharpie1972* · 01-23-2011, 10:26 AM

Hi Ron, no worries. I just giving Jerry Moss a hard time about butting in! Good information and free bumps for my parts! Thanks, Sharpie

**jerry moss** · 01-23-2011, 02:52 PM

Sharpie,
sorry, wasn't trying to hijack you post. just trying to let guys with 70-72 4x4s know this crossmember will also work for them if they have the correct plate. if you like i will delete my posts

*sharpie1972* · 01-23-2011, 03:37 PM

Hi Jerry, just giving you a hard time! Didn't bother me a bit. Later, Sharpie

wmurdock72 · 06-24-2017, 09:02 AM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

flashed · 06-24-2017, 02:31 PM

The Skid plate can be bought from member Hee Haw Racing on here ,the brace you will have to look for .

09-05-2010, 08:42 PM	#1
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	1969 K10 4x4 skid plate From a 1969 K10 4x4 suburban. Correct for trucks, subs, blazers and K20 rigs. Mounts behind the Rockwell T-case in the carrier bearing area. This one is in exceptional shape with correct spacer blocks. No rock dings or other damage. Hard to find piece! $125 shipped. Thanks, Sharpie Attached Images Last edited by sharpie1972; 11-23-2010 at 09:25 PM.

09-06-2010, 08:13 AM	#2
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 1969 K10 4x4 skid plate I have one of these and very happy about it! Anyone restoring a 4x4 should be in the market for this item.

11-23-2010, 09:25 PM	#3
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1969 K10 4x4 skid plate New price $125 shipped. Sharpie

01-23-2011, 12:01 AM	#4
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1969 K10 4x4 skid plate ....

01-23-2011, 12:39 AM	#5
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: 1969 K10 4x4 skid plate i've got a few of those in storage from my "parting out" days. just an extra piece of info- if you remove the little skid plate, the crossmember is the same as the one used with the 70-72 factory skid plate the protects the t-case. there is a board member that made up a bunch of factory looking 70-72 skid plates a few years back and i bought 5 of them from him and plan on using the 67-69 crossmember like the one sharpie has. i compared the crossmember to my factory 72 unit and it's identical. not trying to hijack sharpie's post, just adding a little bit of info. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

01-23-2011, 09:49 AM	#6
KSCHEVYUP Senior Member Join Date: Nov 2003 Location: NEAR MARYSVILLE,KANSAS 66508 Posts: 471	Re: 1969 K10 4x4 skid plate Does anyone have a picture of the correct transfer case skid plate for a 70-72? Thanks Ron __________________ 1972 C30 Cheyenne Super 1971 C10 (Parts truck)

01-23-2011, 09:58 AM	#7
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: 1969 K10 4x4 skid plate i haven't hooked up my camera since i got my computer out of the shop so i can't post pics. maybe try doing a search of older posts. it is basicly a thick steel plate with a little wahoo in it between the trans crossmember and the second crossmember, underneath your 205. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

01-23-2011, 10:17 AM	#8
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1969 K10 4x4 skid plate Here you go, since it did start as my thread! Installed and off including part #. This is not for sale. Only showing pics for reference. Thanks, Sharpie Attached Images

01-23-2011, 10:18 AM	#9
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1969 K10 4x4 skid plate .... Attached Images

01-23-2011, 10:23 AM	#10
KSCHEVYUP Senior Member Join Date: Nov 2003 Location: NEAR MARYSVILLE,KANSAS 66508 Posts: 471	Re: 1969 K10 4x4 skid plate Sharpie- Thanks for the pictures. That clears up all questions. And my apologies for using your thread. Right after I pushed the submit button; I thought to myself "I done that wrong" Ron __________________ 1972 C30 Cheyenne Super 1971 C10 (Parts truck)

01-23-2011, 10:26 AM	#11
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1969 K10 4x4 skid plate Hi Ron, no worries. I just giving Jerry Moss a hard time about butting in! Good information and free bumps for my parts! Thanks, Sharpie

01-23-2011, 02:52 PM	#12
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: 1969 K10 4x4 skid plate Sharpie, sorry, wasn't trying to hijack you post. just trying to let guys with 70-72 4x4s know this crossmember will also work for them if they have the correct plate. if you like i will delete my posts __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA Last edited by jerry moss; 01-23-2011 at 03:08 PM. Reason: stepped on someone else's post

01-23-2011, 03:37 PM	#13
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1969 K10 4x4 skid plate Hi Jerry, just giving you a hard time! Didn't bother me a bit. Later, Sharpie

06-24-2017, 09:02 AM	#14
wmurdock72 Registered User Join Date: Jul 2016 Location: Maize, Ks Posts: 17	Re: 1969 K10 4x4 skid plate Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by LockDoc; 06-24-2017 at 03:47 PM. Reason: WTB by non-supporting member

06-24-2017, 02:31 PM	#15
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: 1969 K10 4x4 skid plate The Skid plate can be bought from member Hee Haw Racing on here ,the brace you will have to look for .



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.