New guy here..........Starting another build - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CVA59 · 09-06-2010, 09:47 AM

Quote:

Originally Posted by ChiefRocka

I think I might have to disagree .... If you mount box slightly to the left (using a spacer) , then your links are adjusted slightly to the right to compensate, you still have the same "throw" coming from the pitman arm.

Nice job on the frame though ... makes it look clean

I agree ROCKA.................You can take out the adjustment in the tie rods. Since i tend to want things exact i usually will go the extra distance to make it spot on. Nothing at all wrong with using the spacers, this is just merely my personal preference.

CVA59 · 09-06-2010, 05:12 PM

Got a little more done today. With the help of Captainfab i now have the pinion angle set, axle perches tacked in place and the track bar tacked in place. Finally, the rear end is done with the exception of welding everything out. I will hopefully have the brake lines, fuel lines and steering all hooked up in the next week or so.

**Captainfab** · 09-07-2010, 12:53 AM

Did the 14 degrees up from level work for you Zack?

**ChiefRocka** · 09-07-2010, 09:57 AM

Quote:

Originally Posted by CVA59

I agree ROCKA.................You can take out the adjustment in the tie rods. Since i tend to want things exact i usually will go the extra distance to make it spot on. Nothing at all wrong with using the spacers, this is just merely my personal preference.

I here you man .... Thats been a curse all my life, nothing wrong with being perfect !!!

Just wanted to set things clear, so others would be worried about it ... Besides, then Captain Fab would lose sales ...

CVA59 · 09-07-2010, 09:17 PM

LOL. I hear ya Rocka.

Fab.... That fixed it up perfectly. Thanks again for the help.
Zack

**Captainfab** · 09-08-2010, 12:51 AM

Yeah, we can't have that.....I have projects to fund

Thanks for lookin out Chief

Quote:

Originally Posted by ChiefRocka

Just wanted to set things clear, so others would be worried about it ... Besides, then Captain Fab would lose sales ...

**Captainfab** · 09-08-2010, 12:52 AM

I'm happy to help Zack, glad it worked out correctly.

Quote:

Originally Posted by CVA59

LOL. I hear ya Rocka.

Fab.... That fixed it up perfectly. Thanks again for the help.
Zack

09-06-2010, 05:12 PM	#27
CVA59 Registered User Join Date: Nov 2009 Location: Longview, Texas Posts: 775	Re: New guy here..........Starting another build Got a little more done today. With the help of Captainfab i now have the pinion angle set, axle perches tacked in place and the track bar tacked in place. Finally, the rear end is done with the exception of welding everything out. I will hopefully have the brake lines, fuel lines and steering all hooked up in the next week or so. __________________ Zack www.23t.weebly.com _________________________________

09-07-2010, 12:53 AM	#28
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,254	Re: New guy here..........Starting another build Did the 14 degrees up from level work for you Zack? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-07-2010, 09:17 PM	#30
CVA59 Registered User Join Date: Nov 2009 Location: Longview, Texas Posts: 775	Re: New guy here..........Starting another build LOL. I hear ya Rocka. Fab.... That fixed it up perfectly. Thanks again for the help. Zack __________________ Zack www.23t.weebly.com _________________________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.