NY WANT TO BUY - Crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

palposity · 09-18-2010, 07:45 PM

I am in need of a frame crossmember. Specifically the 2nd crossmember from the rear of the truck for my K20.

Anybody gots? Please quote price with shipping to 13027. Thanks!

STOCKISH · 09-18-2010, 09:44 PM

I have a K30 frame behind the shop. Got a pic of the one you need so I make sure it's right?

palposity · 09-18-2010, 10:12 PM

I don't have a close up of it at the moment...I have only this pic. It is the cross member that runs between the two front spring perches of the rear axle. If you would like more detailed pics I will need to snap them in the daylight tomorrow. Let me know. Thanks!

STOCKISH · 09-18-2010, 10:31 PM

The one I have is perfect. Will probably be heavy as heck to ship though!

Maybe $20 to knock all the rivets out with a hammer and chisel plus actual shipping?

palposity · 09-18-2010, 10:52 PM

Quote:

Originally Posted by 1972SuperCheyenne

The one I have is perfect. Will probably be heavy as heck to ship though!

Maybe $20 to knock all the rivets out with a hammer and chisel plus actual shipping?

I should clarify that I need the full crossmember that includes the 45 degree dropdown braces on each side. If that changes your price let me know.

Please send the total I would owe you with shipping when you are ready. How would you like it, Paypal?

My frame went to the media blaster last week and for some reason that crossmember was the only thing that came out looking like swiss cheese.

Thanks for your help!

STOCKISH · 09-18-2010, 10:55 PM

Yes PayPal is fine. Say $45 shipped? I will send the drop down brackets as well. Let me know when you send the paypal and I will knock all the rivets out tomorrow. Thanks man.

Addy is... ifixbenz@hotmail.com

Thanks

palposity · 09-18-2010, 11:07 PM

Paypal sent! Thanks for your help!

STOCKISH · 09-18-2010, 11:11 PM

Will get it out tomorrow and ship it Monday!

09-18-2010, 07:45 PM	#1
palposity Registered User Join Date: Sep 2009 Location: Syracuse NY Posts: 684	WANT TO BUY - Crossmember I am in need of a frame crossmember. Specifically the 2nd crossmember from the rear of the truck for my K20. Anybody gots? Please quote price with shipping to 13027. Thanks! __________________ Project #1 "Pops"--1980 Chevrolet Scottsdale C10 3rd Generation in the same original owner family. GOAL: Restore to "almost" original. View Project Pops HERE Project #2 "Cletus"--1986 Chevy K20 4.10 Gear Ratio GOAL: Restore into a heavy duty work/plow rig View Project Cletus HERE - SOLD DD--2008 Duramax CCSB Last edited by palposity; 09-18-2010 at 09:31 PM.

09-18-2010, 09:44 PM	#2
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: WANT TO BUY - Crossmember I have a K30 frame behind the shop. Got a pic of the one you need so I make sure it's right? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-18-2010, 10:12 PM	#3
palposity Registered User Join Date: Sep 2009 Location: Syracuse NY Posts: 684	Re: WANT TO BUY - Crossmember I don't have a close up of it at the moment...I have only this pic. It is the cross member that runs between the two front spring perches of the rear axle. If you would like more detailed pics I will need to snap them in the daylight tomorrow. Let me know. Thanks! Attached Images __________________ Project #1 "Pops"--1980 Chevrolet Scottsdale C10 3rd Generation in the same original owner family. GOAL: Restore to "almost" original. View Project Pops HERE Project #2 "Cletus"--1986 Chevy K20 4.10 Gear Ratio GOAL: Restore into a heavy duty work/plow rig View Project Cletus HERE - SOLD DD--2008 Duramax CCSB

09-18-2010, 10:31 PM	#4
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: WANT TO BUY - Crossmember The one I have is perfect. Will probably be heavy as heck to ship though! Maybe $20 to knock all the rivets out with a hammer and chisel plus actual shipping? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-18-2010, 10:55 PM	#6
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: WANT TO BUY - Crossmember Yes PayPal is fine. Say $45 shipped? I will send the drop down brackets as well. Let me know when you send the paypal and I will knock all the rivets out tomorrow. Thanks man. Addy is... ifixbenz@hotmail.com Thanks __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-18-2010, 11:07 PM	#7
palposity Registered User Join Date: Sep 2009 Location: Syracuse NY Posts: 684	Re: WANT TO BUY - Crossmember Paypal sent! Thanks for your help! __________________ Project #1 "Pops"--1980 Chevrolet Scottsdale C10 3rd Generation in the same original owner family. GOAL: Restore to "almost" original. View Project Pops HERE Project #2 "Cletus"--1986 Chevy K20 4.10 Gear Ratio GOAL: Restore into a heavy duty work/plow rig View Project Cletus HERE - SOLD DD--2008 Duramax CCSB

09-18-2010, 11:11 PM	#8
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: WANT TO BUY - Crossmember Will get it out tomorrow and ship it Monday! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.