Muncie 4 speeds?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

orange prostreet69 · 10-01-2010, 05:57 PM

hey guys any pics and info on you running muncie 4 speeds? I am currently building a '69 C10 short-fleet with a SBC 350&M22 with Mickey Thompson 31X16 radials out back. Need some advice/pics! Thanks!!

Rdrdave · 10-01-2010, 06:26 PM

I'm running that setup in my 68 longbed. 4:11s with 29" tires in the back, CF II clutch setup. Fun to get on.

Uses an automatic crossmember, same driveshaft, cut hole in lowhump for floorshift with benchseat curve. I'll try and get pics but lowered 4" so hard to get under.

10-01-2010, 05:57 PM	#1
orange prostreet69 Registered User Join Date: Aug 2009 Location: Manassas, Va Posts: 60	Muncie 4 speeds?? hey guys any pics and info on you running muncie 4 speeds? I am currently building a '69 C10 short-fleet with a SBC 350&M22 with Mickey Thompson 31X16 radials out back. Need some advice/pics! Thanks!!

10-01-2010, 06:26 PM	#2
Rdrdave Broke and still trying Join Date: Apr 2003 Location: Alameda, CA Posts: 562	Re: Muncie 4 speeds?? I'm running that setup in my 68 longbed. 4:11s with 29" tires in the back, CF II clutch setup. Fun to get on. Uses an automatic crossmember, same driveshaft, cut hole in lowhump for floorshift with benchseat curve. I'll try and get pics but lowered 4" so hard to get under.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.