LFD's gas pedal adapters (71-72 gas pedals in 67-70's) - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jetfixr · 03-12-2010, 02:08 AM

I was looking at the lokar cable for this mod. Problem is lokar has a clevis attached to the pedal end, the stock pedal is not meant to have a clevis attached to it. The stock pedal is set up to have a the cable thread thru it. There is a little pastic bushing on the pedal and a lead bead that is crimped on to the cable to hold it in place. What would be the best way to adapt it?

Sinister · 03-12-2010, 10:12 AM

Quote:

Originally Posted by jetfixr

I was looking at the lokar cable for this mod. Problem is lokar has a clevis attached to the pedal end, the stock pedal is not meant to have a clevis attached to it. The stock pedal is set up to have a the cable thread thru it. There is a little pastic bushing on the pedal and a lead bead that is crimped on to the cable to hold it in place. What would be the best way to adapt it?

You can cut and weld the pedal arm and drill it for the clevis. Or I think somebody, (Hartrod?) removed the clevis and just used the cable end on the stock pedal. I cut and welded mine.

6772owner · 03-12-2010, 03:27 PM

I used the Lokar cable as well, I just pulled the cable all the way out of the sheath and fed it thru the stock pedal eyelet and back in the sheath. The cables pre crimped end then just rides up against the stock plastic insert for the original cable and has worked fine for me.

cobrajet21 · 03-12-2010, 08:59 PM

I'll take one. paypal sent,

travlinman · 03-13-2010, 11:15 PM

can this be used on a 68 burb with a straight 6 ? interested it it will fit/work..
thanks

RED67 · 03-14-2010, 11:30 PM

$$$$$$ sent

Beelzeburb · 04-16-2010, 12:38 PM

Mine is finally in place and working like it should. It took a lot of tweaking, grinding and a little bending but it has the full range of motion, doesn't bind and it lets the pedal sit at a stock angle.

For as much work as it took to use my original '70 pedal linkage I should have probably just purchased a '71-'72 setup.

70stroker · 05-05-2010, 03:40 PM

I am converting over to a 71-71 on my 70gmc. Do you have any of these left?

Whats the reason needed for this adapter. whats different between the cabs?

thanks

ripdog28 · 05-05-2010, 11:43 PM

Quote:

Originally Posted by 70stroker

I am converting over to a 71-71 on my 70gmc. Do you have any of these left?

Whats the reason needed for this adapter. whats different between the cabs?

thanks

No difference in the carbs, just makes it a more reliable/cleaner cable rather then the bar for the throttle. Older models had a bar and not this cable.

70stroker · 05-07-2010, 04:04 PM

ripdog i said whats the difference in the cabs. I have a 71 pedal assembly on its way from a board member, my question is do i need this adapter that lfd is selling? why or why not?

ripdog28 · 05-07-2010, 07:00 PM

lol sorry, no difference in the CABS, just how the pedal mounted. This is all included in the kit. The pedal mounted to the floor prior to 71 and had a bar, not a cable. They use the same three mount holes.

**BIG ORANGE** · 06-04-2010, 09:46 AM

Pay-Pal sent!!! thanks
Donnie Snipes

**67cheby** · 06-04-2010, 09:52 AM

got mine , Thanks

Rokcrln · 06-05-2010, 08:06 PM

Quote:

Originally Posted by BIG ORANGE

Pay-Pal sent!!! thanks
Donnie Snipes

Git it and I need to cut out another round of mounting plates in the morning and get them in the mail Monday. I have three orders this week and only had 1 plate left from the first batch I made up.

Thanks guys,

Kevin
LFD Inc.

Number98 · 06-05-2010, 10:38 PM

Add another set to the list...

Paypal Sent!

Rokcrln · 06-06-2010, 12:00 PM

Quote:

Originally Posted by Number98

Add another set to the list...

Paypal Sent!

Heading out now to cut them out and package them all up!

Kevin
LFD Inc.

Rokcrln · 06-06-2010, 02:48 PM

Cut, punched, drilled, packaged and labeled ready for my wife to drop them off at the post office in the morning. I have 9 more sets ready to go out as well for the next guys so it would only be a 1-2 day wait before being sent out.

Thanks guys.

Kevin
LFD Inc.

WHAMMYBAR66 · 06-21-2010, 09:13 PM

I just ordered one ! I am tired of my Blazer applying the throttle to itself when I am creeping through a parking lot.. thanx !

roadking-111 · 06-21-2010, 11:19 PM

Paypal sent.

WHAMMYBAR66 · 06-29-2010, 11:35 PM

Wanted to make sure my Pay Pal order went through.. I ordered on the 21st, thanx !

Jeff Steele

**Warrens69GMC** · 07-14-2010, 10:24 AM

Payment sent

PipsC10 · 08-23-2010, 11:50 AM

Pay-pal payment sent, Thanks!

Rokcrln · 09-30-2010, 11:31 PM

Sold Out!

I will be making more but for now I am out of stock. When I get enough interest in a 4th run I will get the material and cut them all out.

Thanks,
Kevin
LFD Inc.

68anniversary · 10-01-2010, 11:15 PM

Count me in when you make another round. Thanks

71meangreenc10 · 10-02-2010, 03:08 PM

Have you shipped mine?

Smitty

03-12-2010, 02:08 AM	#101
jetfixr Registered User Join Date: Jan 2005 Location: Central CA Posts: 86	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) I was looking at the lokar cable for this mod. Problem is lokar has a clevis attached to the pedal end, the stock pedal is not meant to have a clevis attached to it. The stock pedal is set up to have a the cable thread thru it. There is a little pastic bushing on the pedal and a lead bead that is crimped on to the cable to hold it in place. What would be the best way to adapt it?

03-12-2010, 03:27 PM	#103
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) I used the Lokar cable as well, I just pulled the cable all the way out of the sheath and fed it thru the stock pedal eyelet and back in the sheath. The cables pre crimped end then just rides up against the stock plastic insert for the original cable and has worked fine for me. __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644

03-12-2010, 08:59 PM	#104
cobrajet21 Registered User Join Date: Mar 2008 Location: Danville, VA Posts: 122	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) I'll take one. paypal sent, __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=288820 68 Chevy CST project 02 Chevy Silverado Ex.cab 71 Ford Torino Cobra

03-13-2010, 11:15 PM	#105
travlinman Registered User Join Date: Feb 2009 Location: stockton ca. Posts: 502	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) can this be used on a 68 burb with a straight 6 ? interested it it will fit/work.. thanks __________________ 94 ls swap silverado 65 Pontiac 78 c30 crew cab dually (parted and gone) 82 c30 crew cab dually ( now building ) 91 r30 crew cab dually (parted and gone) 69 swb-sold 71 lab sold all in progress......__ ..........._______ \|__\__ ..........\|__(O)______(O)] ........................

03-14-2010, 11:30 PM	#106
RED67 Forever Grateful Join Date: Mar 2001 Location: Forney,Texas Posts: 779	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) $$$$$$ sent __________________ R.I.P Dad 04-07-42 - 05-27-09

04-16-2010, 12:38 PM	#107
Beelzeburb Devil's in the Details Join Date: Sep 2008 Location: Southern Utah Posts: 353	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Mine is finally in place and working like it should. It took a lot of tweaking, grinding and a little bending but it has the full range of motion, doesn't bind and it lets the pedal sit at a stock angle. For as much work as it took to use my original '70 pedal linkage I should have probably just purchased a '71-'72 setup. __________________ '70 K10 Suburban - TBI 454, 4L80E, NP241C, Dana 60 & 44 - The 10+ Year Project Thread Datsun 240Z, 510 2 door and an old Honda motorcycle Last edited by Beelzeburb; 04-16-2010 at 12:40 PM.

05-05-2010, 03:40 PM	#108
70stroker Registered User Join Date: Jan 2007 Location: pittsburg kansas Posts: 894	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) I am converting over to a 71-71 on my 70gmc. Do you have any of these left? Whats the reason needed for this adapter. whats different between the cabs? thanks __________________ 70 GMC build: http://67-72chevytrucks.com/vboard/s...d.php?t=613130

05-07-2010, 04:04 PM	#110
70stroker Registered User Join Date: Jan 2007 Location: pittsburg kansas Posts: 894	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) ripdog i said whats the difference in the cabs. I have a 71 pedal assembly on its way from a board member, my question is do i need this adapter that lfd is selling? why or why not? __________________ 70 GMC build: http://67-72chevytrucks.com/vboard/s...d.php?t=613130

05-07-2010, 07:00 PM	#111
ripdog28 Registered User Join Date: Apr 2008 Location: Imperial Beach, CA Posts: 1,040	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) lol sorry, no difference in the CABS, just how the pedal mounted. This is all included in the kit. The pedal mounted to the floor prior to 71 and had a bar, not a cable. They use the same three mount holes. __________________ 69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.3.5/6in drop. My Build.

06-04-2010, 09:46 AM	#112
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Pay-Pal sent!!! thanks Donnie Snipes __________________ Things happen for a reason!

06-04-2010, 09:52 AM	#113
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) got mine , Thanks __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-05-2010, 10:38 PM	#115
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Add another set to the list... Paypal Sent!

06-06-2010, 02:48 PM	#117
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Cut, punched, drilled, packaged and labeled ready for my wife to drop them off at the post office in the morning. I have 9 more sets ready to go out as well for the next guys so it would only be a 1-2 day wait before being sent out. Thanks guys. Kevin LFD Inc.

06-21-2010, 09:13 PM	#118
WHAMMYBAR66 Registered User Join Date: May 2009 Location: LEE'S SUMMIT, MO Posts: 99	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) I just ordered one ! I am tired of my Blazer applying the throttle to itself when I am creeping through a parking lot.. thanx !

06-21-2010, 11:19 PM	#119
roadking-111 Registered User Join Date: Feb 2006 Location: Windsor, CO Posts: 67	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Paypal sent.



Register or Log In To remove these advertisements.

06-29-2010, 11:35 PM	#120
WHAMMYBAR66 Registered User Join Date: May 2009 Location: LEE'S SUMMIT, MO Posts: 99	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Wanted to make sure my Pay Pal order went through.. I ordered on the 21st, thanx ! Jeff Steele

07-14-2010, 10:24 AM	#121
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,622	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Payment sent __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT

08-23-2010, 11:50 AM	#122
PipsC10 Registered User Join Date: Jan 2008 Location: Oakdale, Ca Posts: 655	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Pay-pal payment sent, Thanks! __________________ 1970 2wd short/fleet 350/350 Project "iced green dream" http://67-72chevytrucks.com/vboard/s...d.php?t=272702 2006 Toyota Tacoma double cab 4x4

09-30-2010, 11:31 PM	#123
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Sold Out! I will be making more but for now I am out of stock. When I get enough interest in a 4th run I will get the material and cut them all out. Thanks, Kevin LFD Inc.

10-01-2010, 11:15 PM	#124
68anniversary Registered User Join Date: Jul 2010 Location: Peculiar, Missouri Posts: 125	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Count me in when you make another round. Thanks

10-02-2010, 03:08 PM	#125
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Have you shipped mine? Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.