The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-06-2010, 04:24 PM   #1
John Pasinski
Registered User
 
John Pasinski's Avatar
 
Join Date: Aug 2007
Location: orlando
Posts: 456
Another V8 question

I have a '72 flatbed C30 w/ an overhauled 402BB & 4sp trans.
I get about 7mpg. It's all original including the rear end. I want to put a 283 or even a 6cyl in to improve the milage. The guys I talk to tell me it will be way underpowered and I won't improve the milage. But I see C30's for sale that have 6's in them from the factory. Who's correct? Do any of you have C30's w/ 6's in them? How are they pulling loads?
__________________
A man's thoughts devise his ways; but it's GOD that directs his steps.
John Pasinski is offline   Reply With Quote
Old 10-06-2010, 04:28 PM   #2
clear
Registered User
 
Join Date: Aug 2009
Location: NM
Posts: 46
Re: Another V8 question

I would imagine if you put a 6 cylinder in there that motor would have to work harder then the V8 so you wouldn't gain anything. If anything you should put a beefier motor so it doesn't have to work as hard.
clear is offline   Reply With Quote
Old 10-06-2010, 06:21 PM   #3
GRX
Registered User
 
GRX's Avatar
 
Join Date: Jul 2010
Location: MD
Posts: 1,937
Re: Another V8 question

Quote:
Originally Posted by John Pasinski View Post
But I see C30's for sale that have 6's in them from the factory. Who's correct? Do any of you have C30's w/ 6's in them? How are they pulling loads?
One word ... gearing.

Drive train efficiency determines fuel mileage not engine displacement. Everything - carb tuning, to gear ratios, to tire diameter.
__________________
1969 c-10 Step Side Long Bed. I-6 250cid = = 1969 Pontiac GTO hard top. 400, 4-speed.
GRX is offline   Reply With Quote
Old 10-06-2010, 09:53 PM   #4
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
Re: Another V8 question

You need to figure what gearing you have.
Off the top of my head, I can't remember if that would be a 4.10 or a 4.56 gear. if it is a dual rear wheel truck, it's a 5.13.
I would seriously consider getting a later model 14 bolt rear with a 3.73 or so gear ratio. The engine can pull plenty. And most likely, you aren't even hauling/pulling the major weight the truck was built for anyways.
A smaller engine would help, but not as much as better gearing. Regardless of the engine, you'll still be reving 3000+ RPMs on the road, and still getting passed by socker moms left and right.
Longhorn Man is offline   Reply With Quote
Old 10-07-2010, 12:33 AM   #5
magwakeenercew2jh
RAT1968 '68 Cab/'71 Parts
 
magwakeenercew2jh's Avatar
 
Join Date: Feb 2002
Location: Coarsegold, CA
Posts: 2,375
Re: Another V8 question

Quote:
Originally Posted by Longhorn Man View Post
You need to figure what gearing you have.
A smaller engine would help, but not as much as better gearing. Regardless of the engine, you'll still be reving 3000+ RPMs on the road, and still getting passed by socker moms left and right.
Right on. I had a '63 (maybe it was a '65) back in about '83. It was a half-ton stepper with a 4-speed granny 1st. I changed the carb, coil, distributor, plugs, and almost everything that "screwed" that was engine related.

On a good day, I got nine.

But it could climb mountains.
__________________
M17
Coarsegold, CA
RAT's shiny now.
But always a rat.
magwakeenercew2jh is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:55 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com