Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
10-11-2010, 02:26 AM | #1 |
Building Dreams out of Dimes!
Join Date: May 2005
Location: Bonham, Tx
Posts: 892
|
Will this wheel fit on my 1981 with a 2.5"/4" drop
Will this wheel fit on my truck? It is an 18x9 with 5" backspacing
click the image for specs... What size tire do I need without having rubbing issues? I need to be absolutley curtain these will fit and that I order the right tires before I make my purchase. Otherwise it would be a VERY COSTLY mistake! Thanks guys! |
10-11-2010, 04:35 AM | #2 |
BAD BOW-Silverado XST
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
|
Re: Will this wheel fit on my 1981 with a 2.5"/4" drop
Use this site as a guide: http://www.miata.net/garage/tirecalc.html
The front is important. The front will rub the fender before the rear. Are front and rear tires going to be the same size? |
10-11-2010, 08:39 AM | #3 |
Building Dreams out of Dimes!
Join Date: May 2005
Location: Bonham, Tx
Posts: 892
|
Re: Will this wheel fit on my 1981 with a 2.5"/4" drop
I think that my front and rear tires will be the same. I would like to have 8" wheels in the front and 10" wheels in the back but I can't find them in this particular wheel with the right bolt pattern.
Also... Thanks for the chart but the diamater of the tires I have now are going to be way smaller than the 18s. So I dont have anything to really configure with the chart. |
10-11-2010, 08:53 AM | #4 |
Account Suspended
Join Date: Dec 2008
Location: Huntsville,AL
Posts: 2,119
|
Re: Will this wheel fit on my 1981 with a 2.5"/4" drop
adding bigger tires affects gas milage. Speedo is off, your Odometer is off too so think about gear ratio for your gas milage to
Last edited by nbpro; 10-11-2010 at 08:56 AM. |
10-11-2010, 05:54 PM | #5 |
Building Dreams out of Dimes!
Join Date: May 2005
Location: Bonham, Tx
Posts: 892
|
Re: Will this wheel fit on my 1981 with a 2.5"/4" drop
Yeah I dont think I'm realy concerned about gas mileage at this point. I'll be running premium gas with a 10:1 sb400.
Does anyone know if these wheels will fit? |
10-11-2010, 10:48 PM | #6 |
Account Suspended
Join Date: Dec 2008
Location: Huntsville,AL
Posts: 2,119
|
Re: Will this wheel fit on my 1981 with a 2.5"/4" drop
Suspension http://67-72chevytrucks.com/vboard/f...splay.php?f=25 may get an answer there but what i was referring to tire size and gear ratio need to be considered along with the tranny just something to think about
|
10-11-2010, 11:26 PM | #7 |
Slugish
Join Date: Jan 2005
Location: Earlysville, Va.
Posts: 1,024
|
Re: Will this wheel fit on my 1981 with a 2.5"/4" drop
Quote:
255x18x50 on the front should not be a problem Pm me if you need more info |
10-12-2010, 12:02 AM | #8 |
BAD BOW-Silverado XST
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
|
Re: Will this wheel fit on my 1981 with a 2.5"/4" drop
The wheels will fit. Your problem is how much tire do you want? Rubber bands or some sidewall. The link above will help you determine size based on actual truck measurements.
Last edited by gchemist; 10-12-2010 at 12:03 AM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|