![]() |
![]() |
#26 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: WIW 1/2 ton CCSB
I don't think I'd be too worried about up to 150k as long as I could pull a valve cover or the oil pan and get a look in it to make sure it's been serviced regularly, but $1500 seems kinda high for that many miles...
Posted via Mobile Device
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#27 |
1965 Chevy C10, 2005 4.8L/4l60
![]() Join Date: Aug 2004
Location: DFW Texas
Posts: 8,543
|
Re: WIW 1/2 ton CCSB
I have heard of these motors going well into the 250K range so I really would worry, however I would definately crack it open and llok, also I would agree with the if over say 150K or so, price would need to be cheap for sure.
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 ![]() ![]() ![]() support our troops! |
![]() |
![]() |
![]() |
#28 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: WIW 1/2 ton CCSB
That's what I was thinking....
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#29 |
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: WIW 1/2 ton CCSB
The $1500 was for engine, trans, accessories, wiring, everything to make it run. It wasn't so much the price that bothered me, but the mileage. I had a truck in the shop a few weeks ago with 390K on it, so I know they will run forever. I just hate to have to pull it if it breaks on me.
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
![]() |
![]() |
![]() |
#30 |
1965 Chevy C10, 2005 4.8L/4l60
![]() Join Date: Aug 2004
Location: DFW Texas
Posts: 8,543
|
900
for all of that included, I would possibly offer 1200.00 mentioning the mileage ( you can just act dumb for that moment) and tell him you will load it up now, then see where he goes. but first take a valve cover off and also look at the dipstick and trans dipstick, but you probably know all that. sorry if I stepped on your toes man.
i looked at LKQ and for the motor only with 100K they want $750, so maybe that would be a good deal, they have them with under 50K for $1100.00 but that is engine alone.
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 ![]() ![]() ![]() support our troops! |
![]() |
![]() |
![]() |
#31 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: WIW 1/2 ton CCSB
I've been looking at LKQ also, saw a few 125K 5.3's for $575.
And some 4.8's for $450....I wonder how much more it would be to get it with the accessories, wiring, and computer...... Posted via Mobile Device
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#32 |
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: WIW 1/2 ton CCSB
That's a yard I deal with all of the time (they just love it when I mention 73-91 trucks....). The accessories seem to add up pretty quick, too. I would imagine pulling the wiring harnesses and all would be a PITA compared to just unbolting and pulling an engine.
When I called LKQ, they do not sell an engine as a pull out. Everything is dismantled and sold seperately.
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
![]() |
![]() |
![]() |
#33 |
1965 Chevy C10, 2005 4.8L/4l60
![]() Join Date: Aug 2004
Location: DFW Texas
Posts: 8,543
|
Re: WIW 1/2 ton CCSB
I would call and ask, worse case you say thank you and hang up. The one experience I had with them was very positive and I would buy from them again. I would call and ask them for a low mileage ( fill in your upper level here) motor with all accessories and PCM/harness, then also ask for the trans too. they might include the acc and pcm/harness if you buy the trans and motor together, ya never know. I think I have a contact for the one in Hutchins Texas if that is where your going....let me know if you want it, the contact could be just a sales rep though, she has been good to me and another friend before.
DUH!!! I didnt read what Jonboy wrote. stupid me....there is another group that does the pull out thing though....I am looking for that info....
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 ![]() ![]() ![]() support our troops! Last edited by Clyde65; 10-13-2010 at 01:13 PM. |
![]() |
![]() |
![]() |
#34 |
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: WIW 1/2 ton CCSB
I usually use Robert @ RCS in Tyler. They deliver to me daily. I hve been using them for about 10 years here at the shop. If you want to check them, it's 1-800-259-4020.
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
![]() |
![]() |
![]() |
#36 |
Registered User
Join Date: Apr 2010
Location: Newcastle, OK
Posts: 1,344
|
Re: WIW 1/2 ton CCSB
I hadn't seen this yet, don't do it man...Yours is worth more than the one in Duncan...Trust me.
|
![]() |
![]() |
![]() |
#37 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: WIW 1/2 ton CCSB
Thanks for the info Jon and Clyde, I'm nowhere near a LS swap right now, but I love to dream...
![]() Thanks Ed! Everything is for sale, just depends on the price ![]() Thanks Brandon! Posted via Mobile Device
__________________
![]() ![]() Last edited by joe231; 10-20-2010 at 12:42 PM. |
![]() |
![]() |
![]() |
#39 |
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: WIW 1/2 ton CCSB
On the LS swap, I found the same deal with 59K on it. I passed the deal on to a friend, but I think my '74 will be up for it as soon as the next one comes around.
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
![]() |
![]() |
![]() |
#40 |
1965 Chevy C10, 2005 4.8L/4l60
![]() Join Date: Aug 2004
Location: DFW Texas
Posts: 8,543
|
Re: WIW 1/2 ton CCSB
Woohooo! another convert!
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 ![]() ![]() ![]() support our troops! |
![]() |
![]() |
![]() |
#41 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: WIW 1/2 ton CCSB
Right on Jon!!
Clyde, I'm a convert in my mind, but unfortunately my wallet can't keep up ![]() Posted via Mobile Device
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#42 |
1965 Chevy C10, 2005 4.8L/4l60
![]() Join Date: Aug 2004
Location: DFW Texas
Posts: 8,543
|
Re: WIW 1/2 ton CCSB
heck I know all that very well, it is why I went with the 4.8/4l60e. but knowing what I know now, I should have done it in stages kinda....like did a 700r4 waited a few months, then the 4.8, but since I did mine there is alot more info out there to help us do the swaps. I threw good money away cuz I listened to someone and didnt check their facts first. I also bit off alot more than I should have. I did the motor, trans, brakes, wiring harness, not to mention the fuel system for the LS, motor harness, radiator and more all at once, in my carport, during winter ( yes it WAS cold in Texas!) I was way overwhelmed, but with my dad's help and this forum along with LS1tech forum, we got it done ( 7months of after work and weekends that I didnt have my kids) and it is sweet.
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 ![]() ![]() ![]() support our troops! |
![]() |
![]() |
![]() |
#43 |
Account Suspended
Join Date: Jun 2009
Location: kansas city Ks
Posts: 1,970
|
Re: WIW 1/2 ton CCSB
I need to make a trip to OK one of these days
Posted via Mobile Device |
![]() |
![]() |
![]() |
#44 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: WIW 1/2 ton CCSB
yes you do!!
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#46 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: WIW 1/2 ton CCSB
![]() I still have it Hopefully I'll finish up the 'Burb tank, get my new tires on, and install my hidden hitch from Carolina Classics this weekend. Everything is for sale, just depends on if the price is right ![]() How are you enjoying that killer blazer of yours? Posted via Mobile Device
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#47 |
Senior Member
![]() Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: WIW 1/2 ton CCSB
The Blazer is still fun, but it isn't a pickup truck
![]() |
![]() |
![]() |
![]() |
#48 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: WIW 1/2 ton CCSB
Right on!
Thanks man! Posted via Mobile Device
__________________
![]() ![]() |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
ccsb |
Thread Tools | |
Display Modes | |
|
|