KS LWB bed floor replacement metal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kingsolver72 · 10-28-2010, 05:29 PM

I've had this for a few years and probably won't use it.
I have a lwb truck for sale here and I would throw this floor repacement metal in free,with the sale of the truck.
The first I'll take it" gets it.
SOLD

usmcchevy · 10-28-2010, 06:02 PM

Know anyone headed south anytime soon?

TTT for a great deal!

kingsolver72 · 10-29-2010, 10:27 AM

Quote:

Originally Posted by usmcchevy

Know anyone headed south anytime soon?

TTT for a great deal!

Wish I did. These are nice panels.

hounddogs! · 10-29-2010, 03:12 PM

Do those overlap in the middle, or do you wind up with a single thickness down the center?

Interested, but mama won't be happy if I bring those home before replacing the liftgate on the Jeep.

kingsolver72 · 10-29-2010, 05:49 PM

[QUOTE=hounddogs!;4267169]Do those overlap in the middle, or do you wind up with a single thickness down the center?
Interested, but mama won't be happy if I bring those home before replacing the liftgate on the Jeep.

[/QUOTE

It is 26.5 inches at the narrowest points..ie.inside of wheel well to other edge.It is 38.25 inches at the widest points.Each section that is.I'm guessing you would overlap.
If you wanted to pay for it I could hold it a while..Its not taking up that much space.

DYNAMiTE · 10-30-2010, 12:04 AM

I will be driving from TX to PA and back on Nov 22nd or around there if my deal goes through. I would like to swing by and get these if I could.

kingsolver72 · 10-30-2010, 11:00 AM

Quote:

Originally Posted by DYNAMiTE

I will be driving from TX to PA and back on Nov 22nd or around there if my deal goes through. I would like to swing by and get these if I could.

If you are in a position that you can pay for it I can hold them for you until the later part of Nov.

hounddogs! · 10-30-2010, 05:13 PM

Have you gotten payment yet? If not, I'll do Paypal this PM and take you up on your storage offer.

Loren

kingsolver72 · 10-30-2010, 08:31 PM

Quote:

Originally Posted by hounddogs!

Have you gotten payment yet? If not, I'll do Paypal this PM and take you up on your storage offer.

Loren

No payment yet..I don't have Paypal but I will take Postal money order,cash or gold bouillon.

kingsolver72 · 11-02-2010, 08:01 PM

Hey Loren,Greg just left with the floor halves.
Thanks.
Scott

10-28-2010, 05:29 PM	#1
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,244	LWB bed floor replacement metal SOLD I've had this for a few years and probably won't use it. I have a lwb truck for sale here and I would throw this floor repacement metal in free,with the sale of the truck. The first I'll take it" gets it. SOLD Attached Images __________________ Fight the good fight, finish the race, keep the faith Last edited by kingsolver72; 11-02-2010 at 07:59 PM.

10-28-2010, 06:02 PM	#2
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: LWB bed floor replacement metal Know anyone headed south anytime soon? TTT for a great deal! __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

10-29-2010, 03:12 PM	#4
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 886	Re: LWB bed floor replacement metal Do those overlap in the middle, or do you wind up with a single thickness down the center? Interested, but mama won't be happy if I bring those home before replacing the liftgate on the Jeep. __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

10-29-2010, 05:49 PM	#5
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,244	Re: LWB bed floor replacement metal [QUOTE=hounddogs!;4267169]Do those overlap in the middle, or do you wind up with a single thickness down the center? Interested, but mama won't be happy if I bring those home before replacing the liftgate on the Jeep. [/QUOTE It is 26.5 inches at the narrowest points..ie.inside of wheel well to other edge.It is 38.25 inches at the widest points.Each section that is.I'm guessing you would overlap. If you wanted to pay for it I could hold it a while..Its not taking up that much space. __________________ Fight the good fight, finish the race, keep the faith

10-30-2010, 12:04 AM	#6
DYNAMiTE Registered User Join Date: Jan 2010 Location: Forney, TX Posts: 35	Re: LWB bed floor replacement metal I will be driving from TX to PA and back on Nov 22nd or around there if my deal goes through. I would like to swing by and get these if I could. __________________ My truck looks like a Jig-saw puzzle.......

10-30-2010, 05:13 PM	#8
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 886	Re: LWB bed floor replacement metal Have you gotten payment yet? If not, I'll do Paypal this PM and take you up on your storage offer. Loren __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

11-02-2010, 08:01 PM	#10
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,244	Re: LWB bed floor replacement metal Hey Loren,Greg just left with the floor halves. Thanks. Scott __________________ Fight the good fight, finish the race, keep the faith

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.