My Crew Cab Short Bed Project, AKA "Project Destiny"

[joe231]

Burb was a 2x4
Buy my uncle in law has a 4x4 parts truck that I'm going to try and snag.
I'm probably gonna run 6 lug stuff for now cause it's cheap.
I'm also considering running a divorced transfer case....
Posted via Mobile Device

[firenuttz]

Originally Posted by joe231

Burb was a 2x4
Buy my uncle in law has a 4x4 parts truck that I'm going to try and snag.
I'm probably gonna run 6 lug stuff for now cause it's cheap.
I'm also considering running a divorced transfer case....
Posted via Mobile Device

a divorced transfer case is a double edge sword, one bonus is that you can put it in the center of the truck and have your front and rear drive lines the same length however, if you break the intermediate diveline between the trans and t/case than you are plum out of luck. i wouldnt worry about breaking the drive lines though unless you are gonna run like 800hp with drive lines made out of exhaust tubing. i would just run the divorced t/case if you are running a mild build small block though

gonna go to bed, i gotta get up at 4 and go to meps so i can ship off to boot camp by noon

[TimE]

You keep starting projects and sellin' em, this is going to be what Megan tells you...

Originally Posted by joe231

I'm also considering a divorce....
Posted via Mobile Device

Just funnin' with ya Joe. The trucks lookin good!

[scotts62]

Doh!

I was reading your post Tim and was like who the heck is this guy then i saw it was you and you changed avatars

[joe231]

thanks Tim!!

[BGRAFX]

Where are the pics
Posted via Mobile Device

[TimE]

Originally Posted by scotts62

Doh!

I was reading your post Tim and was like who the heck is this guy then i saw it was you and you changed avatars

Well, I changed it b/c that's what has been taking up the spare time I have had in the last month or so. I didn't think about it until after I posted that you guys might not recognize the "fng"...

Now, Joe, back to your truck thread...

I'm sorta in "catch up mode" and may have missed it but are you planning to convert your current truck to 4wd or are you looking to buy another one and sell this one?

[joe231]

Sorry Michael,
I'm fresh out
J/k

The family like it bed-less




Big thanks to RandyP

Tim,
It depends on which day you ask me
Today is a keep it low and 2wd day
Posted via Mobile Device

[JohnC]

I like those doors on it. They look pretty good. I say stick with your rattle can idea for the time being, and make that sucker satin black!

[joe231]

Thanks John!
I'm not gonna rattle can it, I'm thinking I'll block it out and buy a gallon of satin black to shoot it....
Posted via Mobile Device

[JohnC]

I think it will look good!

[RandyP]

Fix a few dings in those doors and get it all one color! Nice progress on it, didn't waste no time once you had all 4 doors I see. Now if someone would have just taken another 1/2 hour and chased wires instead of doing it the salvage yard way, sorry about that.

I thought you already had that rear gas tank installed? Guess I misread a few pages back. Coulda swore you did that when you did the notch and stuff.

[joe231]

Weren't no thang!

We left the wires from my doors plugged in under the dash and just pulled the wires out as we pulled the doors the pulled them in the new doors as we hung them, it was probably easier that way anyhow.

Yeah, Scott and I used what we had available back when we did the notches to mount the tank (modified the rear crossmember and used some angle to make a front one) and it didn't quite sit right, so when we bought our parts Burb I figured why not just cut the correct crossmembers out of it and make it look right?

It almost looks factory now....
I still need to build a hinge for my passenger tail light so I can hide the filler.
Posted via Mobile Device

[RandyP]

That hinged tail lamp will be killer. I want to see that done pretty bad. If it works good enough, might be something I try on my '74.

[JohnC]

The tail light will be cool. I've seen it done on the 67-72 trucks, but not the squares. You can be a trend setter man!

[joe231]

Well, I got the idea from the wife's favorite car, a 1956 Chevy 4-door wagon.
Did some looking on here and it seems N2TRUX beat me to the idea in a square with his (now sold) Blazer project....but it was never done...so....
maybe I will have some follow through.... you guys feel free to push me

[Jonboy]

I dog dare you to do it.


did that help?

[joe231]

Immensely!

thanks!!

[JohnC]

Originally Posted by Jonboy

I dog dare you to do it.


did that help?

I Triple Dog Dare You!!!!!

[Jonboy]

Originally Posted by JohnC

Attachment 651023

I Triple Dog Dare You!!!!!

Oooooooh! Right to the good stuff! John C ain't pullin' no punches here.

[joe231]

you can't jump from dog dare to triple dog dare...that's against protocol....

[Jonboy]

If I was you, I would worry about getting the taillamp fuel filler done so Scott Farkis doesn't have to come over and rough you up.

[joe231]

[JohnC]

[justpball]

just make it a flat bed and your done...