Halfbreed - GMC Z71 + IH Extd Cab - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 11-16-2010, 07:04 PM

Nice progress, and congrats on getting it on the road!

1985-GMC · 11-16-2010, 09:47 PM

Happy birthday! and congrats on the maiden voyage!

Sweet... spare parts mean your doing it right!

NONHOG · 11-16-2010, 09:54 PM

Quote:

Originally Posted by sparkydog

Today I put 25 miles on Halfbreed and nobody had to tow me!

Awesome! I always think about my route, is the cell phone charged?
How long till AAA can get me?

Nice work and its looking real good in that picture!

sparkydog · 11-17-2010, 12:01 AM

Quote:

Originally Posted by Palf70Step

Starter?

If you mean the main bolts then no, thank goodness the big 2 are in and the starter isn't going to fall out!

But maybe they hold that heat shield over the top of the start solenoid?? I don't know man - it is bugging the crap out of me...

sparkydog · 11-20-2010, 10:03 PM

Friday I drove the truck some more. Gradually gaining more confidence in the running gear... I even broke the wheels loose a couple of times. I took a buddy for a joy ride and we managed to break the back of the bench seat loose under a high-G hole shot. So Fri afternoon I repaired and reinforced the IH bench seat structure.

On Sat the weather was rainy so I did a fun little project - transplanting my MIG from the cheapo cart that came with it over to a chopped, channeled and highly customized new cart. Another half-breed?

**Dieselwrencher** · 11-20-2010, 10:46 PM

Nice

**Palf70Step** · 11-21-2010, 09:43 AM

Somewhere there is a poor old bag lady without her cart. Shame on you

Nice looking halfbreed cart too!!

sparkydog · 11-21-2010, 12:13 PM

Quote:

Originally Posted by Palf70Step

Somewhere there is a poor old bag lady without her cart. Shame on you

I let the chicken do the shady stuff. She almost fought him off. Surprisingly tough for her size.

sparkydog · 11-21-2010, 07:50 PM

Another rainy morning so I surfed the internet looking at various OEM wheel options and started getting into the 17" 5x5's off 96 Impalas. This somehow led to an urge to photoshop so I took a fresh side shot of the truck. I believe that what you see in this photo is do-able. It has the 3" nose job, 17" wheels with 275/60's (about 30" diameter), the rear lowered about 4" and both front and rear fender openings moved a little.

Doing this photo was like Viagra for my project. I instantly went out in the shop and started working and didn't stop for 17 hours....

sparkydog · 12-05-2010, 01:21 AM

Halfbreed's got some rumble now!!

The funny thing was that once I started driving it - the factory muffler was too good. It felt surreal to be inside this cobbled up truck body and have the thing drive so smooth and not make any noise.

So today I took care of that "problem" by transplanting a nice 2 into 1 stainless performance muffler. Now I have a legit project truck with just the right amount of rumble to it.

sparkydog · 12-05-2010, 01:29 AM

After I got the new muffler in I put a warm jacket on and took the truck out to the coast and down PCH while the sun set. If I get hit by a bus tomorrow I will have made my basic goal of building a one-off truck and cruised in it.

... but here's hoping that I live long enough to finish off a few dozen more tasks of the punch list on this project!

PS: I noticed that the rear tires seemed to break loose a lot more with the new muffler on. It must be lighter or something.

**Palf70Step** · 12-05-2010, 09:07 AM

Quote:

Originally Posted by sparkydog

PS: I noticed that the rear tires seemed to break loose a lot more with the new muffler on. It must be lighter or something.

Hmmmmm.......I never thought of the weight reduction. All mine tend to have that EXACT same problem.

Frizzle Fry · 12-08-2010, 01:04 AM

Quote:

Originally Posted by sparkydog

...and didn't stop for 17 hours....

You're supposed to call the doc if it lasts more than 4hrs dude!

Not sold on the Impala wheels. But I think it will look good modern or old skool.

1985-GMC · 12-08-2010, 01:25 AM

Id like to see it with some white steel wheels and IH hubcaps.

sparkydog · 12-08-2010, 01:37 AM

Just got in from driving her at night for the first time. I had to hold off until I replaced the broken haz switch so I could get functional turn signals.

215 miles so far! Schwing! Oh yeah I've been doing 70+ mph on the freeway and I had to verify w/GPS because it felt like 60.

Here's another set of wheels I'm interested in.

sparkydog · 12-08-2010, 01:41 AM

Quote:

Originally Posted by 1985-GMC

Id like to see it with some white steel wheels and IH hubcaps.

OK I will mock it up on a photo and check it out.

sparkydog · 12-08-2010, 01:57 AM

Truth be told these are the wheels I REALLY want to use. But I don't want to spend the time and $ right now to dork around converting the lug pattern.

Back when Sparky was a wee lad riding around on a Schwinn stingray and getting sunburned because sunscreen had not been invented yet, I thought these Olds rallye II's were the baddest wheel on the planet.

Frizzle Fry · 12-08-2010, 02:29 AM

Quote:

Originally Posted by sparkydog

Here's another set of wheels I'm interested in.

TTII style eagles?

1985-GMC · 12-08-2010, 09:44 PM

Id like it kinda like this:

sparkydog · 12-09-2010, 11:30 AM

Quote:

Originally Posted by Frizzle Fry

TTII style eagles?

They are J**p factory wheels off 2002/3/4 Grand Cherokees. Not so easy to find but they are affordable. 17 x ?? with 5x5 lugs.

Got any of them stacked in the corner of your shop, Frizz??

Racinaround · 12-09-2010, 01:25 PM

Nice Welder Stand
Heres Mine!

*87 chevy silverado* · 12-16-2010, 11:37 PM

this is a cool build

**WIDESIDE72** · 01-04-2011, 12:24 AM

Quote:

Originally Posted by sparkydog

Thanks for the kind thoughts everybody!

I have a small embarrassment - these two bolts are left over after the transmission swap. I cannot figure out where they went. They came from the passenger side. Does anybody recognize them (from their GM equipment)?

I have parted a few 88-98 GM trucks. Possibly crossmember bolts (?)

sparkydog · 01-08-2011, 04:05 PM

Quote:

Originally Posted by WIDESIDE72

I have parted a few 88-98 GM trucks. Possibly crossmember bolts (?)

Thanks - I still haven't figured it out.
I keep thinking they were holding a heat shield onto the tranny cross member. They are the same style as the other bolts around the engine bay that hold heat tin on. But I can't see where I missed anything.... and I don't have an extra heat shield left over.

sparkydog · 01-08-2011, 04:13 PM

I just weighed my truck today. I came in at 4080# curb weight and I'm only missing about 200# of gear to take it to completely rigged out.

The info I have on the stock GM X-cab seems to indicate official curb weight was either 4140 or 4526#.

So my rig is either right at or just barely lighter than a stock GM X-cab.

This is good because it means that using a 1/2T chassis ended up being the right move. There were some comments on the IH web where they predicted my IH body metal was going weigh so much more than the GM body that I would overload my 1/2T frame.

My front wheels are taking 2530# so my weight ratio is 62% to 38% front/rear.

11-16-2010, 07:04 PM	#376
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Halfbreed - GMC Z71 + IH Extd Cab Nice progress, and congrats on getting it on the road! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-16-2010, 09:47 PM	#377
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: Halfbreed - GMC Z71 + IH Extd Cab Happy birthday! and congrats on the maiden voyage! Sweet... spare parts mean your doing it right! __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

11-20-2010, 10:03 PM	#380
sparkydog Registered User Join Date: Feb 2010 Location: Fallbrook, CA Posts: 910	Halfbreed Jr. Friday I drove the truck some more. Gradually gaining more confidence in the running gear... I even broke the wheels loose a couple of times. I took a buddy for a joy ride and we managed to break the back of the bench seat loose under a high-G hole shot. So Fri afternoon I repaired and reinforced the IH bench seat structure. On Sat the weather was rainy so I did a fun little project - transplanting my MIG from the cheapo cart that came with it over to a chopped, channeled and highly customized new cart. Another half-breed? Attached Images __________________ Balls and a Sawzall Project Halfbreed Porsche 944 L67V6 CARB Legal & Other Stuff

11-20-2010, 10:46 PM	#381
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Halfbreed - GMC Z71 + IH Extd Cab Nice __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-21-2010, 09:43 AM	#382
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Halfbreed - GMC Z71 + IH Extd Cab Somewhere there is a poor old bag lady without her cart. Shame on you Nice looking halfbreed cart too!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 11-21-2010 at 05:46 PM.

11-21-2010, 07:50 PM	#384
sparkydog Registered User Join Date: Feb 2010 Location: Fallbrook, CA Posts: 910	Re: Halfbreed - GMC Z71 + IH Extd Cab Another rainy morning so I surfed the internet looking at various OEM wheel options and started getting into the 17" 5x5's off 96 Impalas. This somehow led to an urge to photoshop so I took a fresh side shot of the truck. I believe that what you see in this photo is do-able. It has the 3" nose job, 17" wheels with 275/60's (about 30" diameter), the rear lowered about 4" and both front and rear fender openings moved a little. Doing this photo was like Viagra for my project. I instantly went out in the shop and started working and didn't stop for 17 hours.... Attached Images __________________ Balls and a Sawzall Project Halfbreed Porsche 944 L67V6 CARB Legal & Other Stuff Last edited by sparkydog; 11-21-2010 at 08:00 PM.

12-05-2010, 01:21 AM	#385
sparkydog Registered User Join Date: Feb 2010 Location: Fallbrook, CA Posts: 910	Re: Halfbreed - GMC Z71 + IH Extd Cab Halfbreed's got some rumble now!! The funny thing was that once I started driving it - the factory muffler was too good. It felt surreal to be inside this cobbled up truck body and have the thing drive so smooth and not make any noise. So today I took care of that "problem" by transplanting a nice 2 into 1 stainless performance muffler. Now I have a legit project truck with just the right amount of rumble to it. Attached Images __________________ Balls and a Sawzall Project Halfbreed Porsche 944 L67V6 CARB Legal & Other Stuff

12-05-2010, 01:29 AM	#386
sparkydog Registered User Join Date: Feb 2010 Location: Fallbrook, CA Posts: 910	Re: Halfbreed - GMC Z71 + IH Extd Cab After I got the new muffler in I put a warm jacket on and took the truck out to the coast and down PCH while the sun set. If I get hit by a bus tomorrow I will have made my basic goal of building a one-off truck and cruised in it. ... but here's hoping that I live long enough to finish off a few dozen more tasks of the punch list on this project! PS: I noticed that the rear tires seemed to break loose a lot more with the new muffler on. It must be lighter or something. __________________ Balls and a Sawzall Project Halfbreed Porsche 944 L67V6 CARB Legal & Other Stuff

12-08-2010, 01:25 AM	#389
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: Halfbreed - GMC Z71 + IH Extd Cab Id like to see it with some white steel wheels and IH hubcaps. __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

12-08-2010, 01:37 AM	#390
sparkydog Registered User Join Date: Feb 2010 Location: Fallbrook, CA Posts: 910	Re: Halfbreed - GMC Z71 + IH Extd Cab Just got in from driving her at night for the first time. I had to hold off until I replaced the broken haz switch so I could get functional turn signals. 215 miles so far! Schwing! Oh yeah I've been doing 70+ mph on the freeway and I had to verify w/GPS because it felt like 60. Here's another set of wheels I'm interested in. Attached Images __________________ Balls and a Sawzall Project Halfbreed Porsche 944 L67V6 CARB Legal & Other Stuff Last edited by sparkydog; 12-08-2010 at 01:39 AM.

12-08-2010, 01:57 AM	#392
sparkydog Registered User Join Date: Feb 2010 Location: Fallbrook, CA Posts: 910	Re: Halfbreed - GMC Z71 + IH Extd Cab Truth be told these are the wheels I REALLY want to use. But I don't want to spend the time and $ right now to dork around converting the lug pattern. Back when Sparky was a wee lad riding around on a Schwinn stingray and getting sunburned because sunscreen had not been invented yet, I thought these Olds rallye II's were the baddest wheel on the planet. Attached Images __________________ Balls and a Sawzall Project Halfbreed Porsche 944 L67V6 CARB Legal & Other Stuff

12-08-2010, 09:44 PM	#394
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: Halfbreed - GMC Z71 + IH Extd Cab Id like it kinda like this: Attached Images __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

12-09-2010, 01:25 PM	#396
Racinaround Registered User Join Date: Oct 2009 Location: Mountlake Terrace, WA Posts: 260	Re: Halfbreed - GMC Z71 + IH Extd Cab Nice Welder Stand Heres Mine! Attached Images __________________ 1950 Chevy 1500 1961 C-10 1969 C-10 1971 Chevelle 2008 Dodge HD3500 Tow Rig

12-16-2010, 11:37 PM	#397
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: Halfbreed - GMC Z71 + IH Extd Cab this is a cool build

01-08-2011, 04:13 PM	#400
sparkydog Registered User Join Date: Feb 2010 Location: Fallbrook, CA Posts: 910	Re: Halfbreed - GMC Z71 + IH Extd Cab I just weighed my truck today. I came in at 4080# curb weight and I'm only missing about 200# of gear to take it to completely rigged out. The info I have on the stock GM X-cab seems to indicate official curb weight was either 4140 or 4526#. So my rig is either right at or just barely lighter than a stock GM X-cab. This is good because it means that using a 1/2T chassis ended up being the right move. There were some comments on the IH web where they predicted my IH body metal was going weigh so much more than the GM body that I would overload my 1/2T frame. My front wheels are taking 2530# so my weight ratio is 62% to 38% front/rear. __________________ Balls and a Sawzall Project Halfbreed Porsche 944 L67V6 CARB Legal & Other Stuff Last edited by sparkydog; 01-09-2011 at 01:19 AM.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.