![]() |
![]() |
#1 |
Registered User
Join Date: Nov 2010
Location: Merced, California
Posts: 8
|
![]()
I need to replace my wiper motor, but I cannot figure out how to get the vent cowl off. I have a '90 'burban. Any help is appreciated.
![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2006
Location: Alabama
Posts: 661
|
Re: wiper motor
It had 4 bolts on front and in back it has 5 nipples that push into holes in rear cowl if it is same as 86 truck.
Last edited by HOGDADDY; 11-18-2010 at 07:13 PM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2010
Location: Merced, California
Posts: 8
|
![]()
Thanks, that is what I was thinking. I was tring to keep from breaking something.
![]() ![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Nov 2010
Location: Rome,NY
Posts: 32
|
Re: wiper motor
I also have a 90 suburban, but you can replace the wiper motor with out removing the cowl. I know because I just removed one from a 89 out in the junk yard with out taking the cowl off.
|
![]() |
![]() |
![]() |
#5 |
Garage wrench
Join Date: Feb 2008
Location: LaCrosse, WI
Posts: 1,855
|
Re: wiper motor
yes, you should not have to remove anything other than the wiper linkage/transmission that connects to the motor. I've done this several times, just use the access hole above the motor on the cowl.
__________________
-Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD..... |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Nov 2010
Location: Merced, California
Posts: 8
|
Re: wiper motor
Thanks guys, I was just going by what the Chilton's said.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Nov 2010
Location: Merced, California
Posts: 8
|
![]()
It's all done, thanks for all the help.
![]() ![]() ![]() |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
cowling, wiper motor |
Thread Tools | |
Display Modes | |
|
|