Take it all 71 longbed 500 cad /425 cad - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brennecke · 05-30-2003, 01:24 PM

I have a 71 chevy longbed pickup 3/tree, 350. Standard rust , good cab corners and bed floor, new tires. The truck runs fine, but I put in a dead HEI unit and haven't gotten that fixed. THe carrier baring just went out, and that was the last straw.

I also have a 500 cad motor half pulled from a 73 eldorado and a 425 caddy motor which is sitting in the bed of the truck. Theres an eaton 3.73 posi unit in a six bolt truck axle unit sitting in the back.

I have no time to work on this project anymore. I'm sad to part with it all, but for $2500 it can all go to anyone who can pick it up.

brennecke · 05-30-2003, 01:26 PM

i have a new carrier baring in a box and a dissasembled modified Quadrajet that go with it.

brennecke · 06-09-2003, 09:54 AM

Make me an offer.
110 views and no bites. I must have over priced it or nobody lives close enough who wants to come get it.

Tracy Focht · 06-09-2003, 11:55 AM

tried to reply to your PM, but your mailbox is full...email me at tfocht@kicker.com

Tracy

Custom 68 · 06-09-2003, 12:05 PM

I also tried to PM. I am interested in just the rear end if you are going to part some of it.
Thanks

brennecke · 06-09-2003, 02:35 PM

It's all cleared out now. Sorry about that.

brennecke · 06-12-2003, 10:42 AM

$1800 takes it all, bring a trailer. I have a new doors and front fender to throw in too. This is a great project, I just won't have time.

I would consider trading for an 97 or newer import with lousy or no interior. I need to build a car to show off car audio and entertainment stuff.

brennecke · 06-16-2003, 10:17 AM

Ok. THe caddy and the cad engines are sold.
I'll go with $1200 on the truck, two doors a fender and the posi axle.

Would also trade for a newer van or suburban with good body/engine and bad interior.

brennecke · 06-20-2003, 10:14 AM

Any offers?
Come see it, It's a decent truck.

05-30-2003, 01:24 PM	#1
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	Take it all 71 longbed 500 cad /425 cad I have a 71 chevy longbed pickup 3/tree, 350. Standard rust , good cab corners and bed floor, new tires. The truck runs fine, but I put in a dead HEI unit and haven't gotten that fixed. THe carrier baring just went out, and that was the last straw. I also have a 500 cad motor half pulled from a 73 eldorado and a 425 caddy motor which is sitting in the bed of the truck. Theres an eaton 3.73 posi unit in a six bolt truck axle unit sitting in the back. I have no time to work on this project anymore. I'm sad to part with it all, but for $2500 it can all go to anyone who can pick it up. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

05-30-2003, 01:26 PM	#2
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	i have a new carrier baring in a box and a dissasembled modified Quadrajet that go with it. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

06-09-2003, 09:54 AM	#3
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	Make me an offer. 110 views and no bites. I must have over priced it or nobody lives close enough who wants to come get it. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

06-09-2003, 12:05 PM	#5
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,937	I also tried to PM. I am interested in just the rear end if you are going to part some of it. Thanks __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

06-09-2003, 02:35 PM	#6
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	It's all cleared out now. Sorry about that. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

06-09-2003, 11:55 AM	#4
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	tried to reply to your PM, but your mailbox is full...email me at tfocht@kicker.com Tracy

06-12-2003, 10:42 AM	#7
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	$1800 takes it all, bring a trailer. I have a new doors and front fender to throw in too. This is a great project, I just won't have time. I would consider trading for an 97 or newer import with lousy or no interior. I need to build a car to show off car audio and entertainment stuff. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

06-16-2003, 10:17 AM	#8
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	Ok. THe caddy and the cad engines are sold. I'll go with $1200 on the truck, two doors a fender and the posi axle. Would also trade for a newer van or suburban with good body/engine and bad interior. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

06-20-2003, 10:14 AM	#9
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	Any offers? Come see it, It's a decent truck. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.