1963 C10 SWB Big Window Build - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 11-30-2010, 07:51 PM

Very nice! I like the heavier duty carrier bearing as well. Maybe some of you guys can make a floating style. I have seen these in a much larger scale on some odd ball heavy semis. They have springs on the top and on the bottom to allow the carrier bearing to move if ever needed.

chevyman95 · 12-02-2010, 04:12 PM

How do you like that rustoleum professional?

Very nice build

DRTYRAT30 · 12-02-2010, 07:28 PM

Quote:

Originally Posted by chevyman95

How do you like that rustoleum professional?

Very nice build

So far so good. It sprays nice, lays out like auto paint. I havent had it on the road yet so well see, but it seems tough.

Thanks

chevyman95 · 12-02-2010, 11:25 PM

cool just wondering, I painted a car with the rattle can non professional flat black and swore I would never use them again, It was very inconsistent and a pain to make look right then if you brushed up against it it would leave marks.

DRTYRAT30 · 12-04-2010, 01:30 AM

I got the front end on and the motor dialed in, had to do some trimming on the fenders, still need to fab some round bar along the edge's. I started getting the bed ready also. Still need to finnish the plumbing on my air lines. here's some pics.

65Pickup · 12-04-2010, 01:59 AM

Wow looks great, nice update. The grille looks clean. Keep it up.

64shortc10 · 12-04-2010, 07:00 AM

SiCK!
Tony from Norcal
Posted via Mobile Device

c10Mang · 12-04-2010, 06:31 PM

now thats what I am talkin bout!! you going to roll that thing tomorrow??

DRTYRAT30 · 12-04-2010, 09:07 PM

Thanks all... I took it around the hood today, open header and all. Getting the bed ready to install, then the accuair and its off to shake down run...

Dinos63 · 12-04-2010, 11:20 PM

lookin killer!! nice work

tuckin55 · 12-05-2010, 12:33 AM

im really digging the valve covers a breather

Mad Rods · 12-05-2010, 12:39 AM

Looking good bro!!!!
Posted via Mobile Device

Alan's Classic · 12-05-2010, 12:41 AM

Lookin' Great!!

DRTYRAT30 · 12-06-2010, 12:47 PM

Thanks guys, Dino I can't wait to see some more of that Orange Crush, I know your close.
Posted via Mobile Device

66ZZ4 · 12-06-2010, 08:20 PM

Very cool truck. Can't wait to see it finished. Been following your build from the start. All the pics you posted are going to be very helpful to me on my build. Keep up the good work!

ratty 46 · 12-06-2010, 09:54 PM

Nice .... do you plan on building an inner fender set up of are you going to run it open??

Ratty 46

DRTYRAT30 · 12-06-2010, 11:22 PM

Thanks guys. I will build a inner fender and support brace to the core support from the firewall. I want to shake it down a few hundred miles and nut & bolt it a few times first. Not to mention body and paint.
Posted via Mobile Device

jasonhall · 12-15-2010, 12:26 AM

How did you mount your tank to your notches? it looks good!

**Dieselwrencher** · 12-15-2010, 04:49 PM

Very nice job! It's looking killer!

JNJchev77 · 12-15-2010, 05:22 PM

Quote:

Originally Posted by 61 son of a Gun

Lol I hear you Bro ,We just moved a few months ago .I been breakin the neighbors in gently , first the loud pipes and the occasional burnout ,then the grinder and compressor and the son's gas R/C car. Hopefully they don't mind the smell of paint and primer.

LOL too funny man... I was just knockin out rivets the other day, my loud azz compressor's going off every 10 minutes, air hammer's going, mixed in a little grinding and cut off wheel. Had the new neighbors across the street wondering what the hell was going on. They actually came over and were interested in what I was doin, so after talkin to them like I actually knew what I was doin

, they were pretty cool about it.

DRTYRAT30 · 12-15-2010, 11:56 PM

Quote:

Originally Posted by jasonhall

How did you mount your tank to your notches? it looks good!

I got some matching round tube and welded some tabs for the frame and tank and bolted it in.

Thanks man...can't wait to see more of your build.

jasonhall · 12-16-2010, 12:03 AM

Thanks for the picture and how many gallons does that tank hold?

DRTYRAT30 · 12-16-2010, 12:06 AM

Got the accuair vu4 manifold mounted and plumbed and the avs-7 switch box wired in. Ran all 3/8 line with 3/8 rubber fuel hose anywhere it can come in contact with edges so it won't wear. That accuair valve is sweet, the easiest air system i have ever worked with. I also put the muffler kit on the valve exhaust, and it sounds cool when you dump it. Bed is on also, i need to pull it out for some pictures. I need to put the hood on and drive it over to the exhaust shop.

Delmo · 12-16-2010, 01:54 AM

Bro you've been busy. Looks great.

DRTYRAT30 · 12-16-2010, 02:48 AM

Thanks man. And Jason it holds 5 gal. I got it from AVS.
Posted via Mobile Device

11-30-2010, 07:51 PM	#226
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 1963 C10 SWB Big Window Build Very nice! I like the heavier duty carrier bearing as well. Maybe some of you guys can make a floating style. I have seen these in a much larger scale on some odd ball heavy semis. They have springs on the top and on the bottom to allow the carrier bearing to move if ever needed. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.* Last edited by Dieselwrencher; 11-30-2010 at 07:51 PM.

12-02-2010, 04:12 PM	#227
chevyman95 Registered User Join Date: Mar 2010 Location: Underground Bunker Posts: 284	Re: 1963 C10 SWB Big Window Build How do you like that rustoleum professional? Very nice build

12-02-2010, 11:25 PM	#229
chevyman95 Registered User Join Date: Mar 2010 Location: Underground Bunker Posts: 284	Re: 1963 C10 SWB Big Window Build cool just wondering, I painted a car with the rattle can non professional flat black and swore I would never use them again, It was very inconsistent and a pain to make look right then if you brushed up against it it would leave marks.

12-04-2010, 01:30 AM	#230
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build I got the front end on and the motor dialed in, had to do some trimming on the fenders, still need to fab some round bar along the edge's. I started getting the bed ready also. Still need to finnish the plumbing on my air lines. here's some pics.

12-04-2010, 01:59 AM	#231
65Pickup Registered User Join Date: Jun 2010 Location: Vancouver Island BC Posts: 652	Re: 1963 C10 SWB Big Window Build Wow looks great, nice update. The grille looks clean. Keep it up. __________________

12-04-2010, 07:00 AM	#232
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: 1963 C10 SWB Big Window Build SiCK! Tony from Norcal Posted via Mobile Device

12-04-2010, 06:31 PM	#233
c10Mang Registered User Join Date: May 2008 Location: Venice, Ca Posts: 322	Re: 1963 C10 SWB Big Window Build now thats what I am talkin bout!! you going to roll that thing tomorrow??

12-04-2010, 09:07 PM	#234
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build Thanks all... I took it around the hood today, open header and all. Getting the bed ready to install, then the accuair and its off to shake down run...

12-04-2010, 11:20 PM	#235
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: 1963 C10 SWB Big Window Build lookin killer!! nice work __________________ CHEVY ONLY... Nothin Else !

12-05-2010, 12:33 AM	#236
tuckin55 Registered User Join Date: Feb 2008 Location: Mesquite tx Posts: 54	Re: 1963 C10 SWB Big Window Build im really digging the valve covers a breather

12-05-2010, 12:39 AM	#237
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Re: 1963 C10 SWB Big Window Build Looking good bro!!!! Posted via Mobile Device __________________ Chevy Only Tx.........

12-05-2010, 12:41 AM	#238
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: 1963 C10 SWB Big Window Build Lookin' Great!! __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

12-06-2010, 12:47 PM	#239
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build Thanks guys, Dino I can't wait to see some more of that Orange Crush, I know your close. Posted via Mobile Device

12-06-2010, 08:20 PM	#240
66ZZ4 Registered User Join Date: Jun 2009 Location: Saint Anne, Illinois Posts: 80	Re: 1963 C10 SWB Big Window Build Very cool truck. Can't wait to see it finished. Been following your build from the start. All the pics you posted are going to be very helpful to me on my build. Keep up the good work!

12-06-2010, 09:54 PM	#241
ratty 46 Registered User Join Date: Jun 2009 Location: Atlanta, Ga. Posts: 1,104	Re: 1963 C10 SWB Big Window Build Nice .... do you plan on building an inner fender set up of are you going to run it open?? Ratty 46 Last edited by ratty 46; 12-06-2010 at 09:58 PM.



Register or Log In To remove these advertisements.

12-06-2010, 11:22 PM	#242
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build Thanks guys. I will build a inner fender and support brace to the core support from the firewall. I want to shake it down a few hundred miles and nut & bolt it a few times first. Not to mention body and paint. Posted via Mobile Device

12-15-2010, 12:26 AM	#243
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: 1963 C10 SWB Big Window Build How did you mount your tank to your notches? it looks good!

12-15-2010, 04:49 PM	#244
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 1963 C10 SWB Big Window Build Very nice job! It's looking killer! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-16-2010, 12:03 AM	#247
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: 1963 C10 SWB Big Window Build Thanks for the picture and how many gallons does that tank hold? Last edited by jasonhall; 12-16-2010 at 12:06 AM.

12-16-2010, 12:06 AM	#248
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build Got the accuair vu4 manifold mounted and plumbed and the avs-7 switch box wired in. Ran all 3/8 line with 3/8 rubber fuel hose anywhere it can come in contact with edges so it won't wear. That accuair valve is sweet, the easiest air system i have ever worked with. I also put the muffler kit on the valve exhaust, and it sounds cool when you dump it. Bed is on also, i need to pull it out for some pictures. I need to put the hood on and drive it over to the exhaust shop.

12-16-2010, 01:54 AM	#249
Delmo Registered User Join Date: Feb 2003 Location: Burbank CA Posts: 1,226	Re: 1963 C10 SWB Big Window Build Bro you've been busy. Looks great.

12-16-2010, 02:48 AM	#250
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build Thanks man. And Jason it holds 5 gal. I got it from AVS. Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.