350/400 cylinder heads FS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lukecp · 06-22-2003, 11:04 AM

I have a matching pair of casting number 462624 cylinder heads for sale.
Mortec.com says 75-85 350 or 400, 76cc chambers, and they have 1.72/1.50 valves in them.
They were rebuilt 21xxx miles ago and i ran them in my truck with no problems. They had a full valve job, as well as hardned exhaust valve seats installed. I have looked them over pretty good and i have found no cracks, and they did not leak coolant when i ran them on the truck.
They are complete with valves, valvesprings, and rocker arm studs.

I will take $100 obo for the pair, plus shipping.

lukecp · 06-23-2003, 10:08 AM

ttt

lukecp · 06-23-2003, 07:55 PM

Ok, price reduced to $75 obo, plus shipping. I took these heads off my truck 2 weeks ago to bolt on a pair of higer-performance heads. They worked great in my truck, but i wanted a bit more power. I would not hesitate to bolt them on and drive off. Save some money over getting your old heads rebuilt, or buying a new pair.

JimKshortstep4x4 · 06-24-2003, 07:39 AM

Are the heads drilled for steam holes?

Jim

lukecp · 06-24-2003, 05:01 PM

I'm not sure. I can go look though. Where are the steam holes located on the head?

Blue_71 · 06-24-2003, 05:14 PM

right between each cylinder, there will be 2 holes

lukecp · 06-25-2003, 06:03 PM

Sorry, the heads don't have steam holes.

lukecp · 06-26-2003, 03:05 PM

ttt

Price reduced to $50 plus shipping. These are a pair of low-mileage, rebuilt heads, for $25 each.

muleskinner · 07-02-2003, 07:56 PM

never heard of steam holes in heads. is that one of those nifty tricks?

06-22-2003, 11:04 AM	#1
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	350/400 cylinder heads FS I have a matching pair of casting number 462624 cylinder heads for sale. Mortec.com says 75-85 350 or 400, 76cc chambers, and they have 1.72/1.50 valves in them. They were rebuilt 21xxx miles ago and i ran them in my truck with no problems. They had a full valve job, as well as hardned exhaust valve seats installed. I have looked them over pretty good and i have found no cracks, and they did not leak coolant when i ran them on the truck. They are complete with valves, valvesprings, and rocker arm studs. I will take $100 obo for the pair, plus shipping. __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

06-23-2003, 10:08 AM	#2
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	ttt __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

06-23-2003, 07:55 PM	#3
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Ok, price reduced to $75 obo, plus shipping. I took these heads off my truck 2 weeks ago to bolt on a pair of higer-performance heads. They worked great in my truck, but i wanted a bit more power. I would not hesitate to bolt them on and drive off. Save some money over getting your old heads rebuilt, or buying a new pair. __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

06-24-2003, 05:01 PM	#5
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	I'm not sure. I can go look though. Where are the steam holes located on the head? __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

06-25-2003, 06:03 PM	#7
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Sorry, the heads don't have steam holes. __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

06-24-2003, 07:39 AM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Are the heads drilled for steam holes? Jim

06-26-2003, 03:05 PM	#8
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	ttt Price reduced to $50 plus shipping. These are a pair of low-mileage, rebuilt heads, for $25 each. __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

07-02-2003, 07:56 PM	#9
muleskinner Registered User Join Date: Jan 2003 Location: Valrico, FL Posts: 65	never heard of steam holes in heads. is that one of those nifty tricks? __________________ I'm not a Muleskinner...... Dad gave me that CB handle when I was 8 so......... it pops in my head every now and then.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.