what are you guys doing for ..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hugger6933 · 12-15-2010, 09:04 PM

seat belts? I would like some 3point seat belts and my truck only has lap belts. I tryed somebelts out of a 77 truck and they are'nt even close. I read somewhere that s-10 belts would work but I'd like to know what everyone is doing. I can't find any s-10 belts on my yard and I have crushed out about 50 of those. I found some in the parts cat. are they just one side or both? Jim

**kev2809** · 12-15-2010, 09:45 PM

ive wondered this same thing. im thinking of getting nbs (99-07) chevy seats. the seatbelts are built into the seat. just an idea..especially if you havent picked out seats yet

Hubscrub · 12-15-2010, 09:49 PM

Still have the stock belts. i like just haveing a lap belt i hate wearing a shoulder belt

gkesseru · 12-15-2010, 10:07 PM

I bought new retractable 3 points from Wesco. Not bad, it was $62 each side.
http://wescoperformance.stores.yahoo.net/resebe.html
I think that you would be taking a safety risk to use something out of a junk yard.

smn69 · 12-16-2010, 12:44 PM

I have the s10 belts. They are from the earlier s10 models with the single bolt mount. If you are a bigger person, you may need to find a way to lengthen out a bit. I have no problem using them, with all the cash for clunker cars in the yards, mine came out of a s10 that didn't even have a dented fender. Driver and passenger side only cost me $10.00.

kcsa75 · 12-16-2010, 03:09 PM

Quote:

Originally Posted by gkesseru

I bought new retractable 3 points from Wesco. Not bad, it was $62 each side.
http://wescoperformance.stores.yahoo.net/resebe.html
I think that you would be taking a safety risk to use something out of a junk yard.

Thanks for posting these photos. I've been looking at these belts as well. When you bought the belts, did they come with mounting hardware or did you buy new? My '72 has all the holes in the right place, even for the shoulder harness, but I'm curious if there is a safety issue using existing bolts, etc.

Willie

dan76 · 12-16-2010, 03:19 PM

The 70 I just acquired has what looks to be a mounting point for a 3-point seat belt/shoulder harness on the B-pillar. As it's several hundred miles away right now I can't check or take a pic.

Anyone pull the factory plug on this mounting point and determine it's for a shoulder belt?

Woody · 12-16-2010, 03:50 PM

The B-pillor threaded hole is for mounting the shoulder belt. it is a 7/16" fine thread IIRC.

Woody

smn69 · 12-16-2010, 04:10 PM

I have a 69 and the B pillar mounting hole is there and it is a fine thread. A flywheel bolt will fit (if you need a size to compare it to).

A.P. · 12-16-2010, 04:22 PM

I'm doing jury duty and serfing this great site. I love it. This is whats keeping me awake.

hugger6933 · 12-16-2010, 09:04 PM

I thought I read that the s-10 belts were a tight fit. I am 6'2 and go in at about 360ish, so I need all the room I can get! Those from wesco may be the ticket I have buddy buckets in this truck and did try some late model in my 70 it was rally cramped but I have put in a tilt that is almost all the way down [towards the dash]. I do have the anchor in the B-pillars for the 3 piont system and it is a 7/16 fine thread the floor is 1/2 coarse. Jim

12-15-2010, 09:04 PM	#1
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,280	what are you guys doing for ..... seat belts? I would like some 3point seat belts and my truck only has lap belts. I tryed somebelts out of a 77 truck and they are'nt even close. I read somewhere that s-10 belts would work but I'd like to know what everyone is doing. I can't find any s-10 belts on my yard and I have crushed out about 50 of those. I found some in the parts cat. are they just one side or both? Jim

12-15-2010, 09:45 PM	#2
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: what are you guys doing for ..... ive wondered this same thing. im thinking of getting nbs (99-07) chevy seats. the seatbelts are built into the seat. just an idea..especially if you havent picked out seats yet __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-15-2010, 09:49 PM	#3
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: what are you guys doing for ..... Still have the stock belts. i like just haveing a lap belt i hate wearing a shoulder belt __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14 Last edited by Hubscrub; 12-15-2010 at 09:51 PM.

12-15-2010, 10:07 PM	#4
gkesseru Registered User Join Date: Dec 2009 Location: California, Maryland Posts: 544	Re: what are you guys doing for ..... I bought new retractable 3 points from Wesco. Not bad, it was $62 each side. http://wescoperformance.stores.yahoo.net/resebe.html I think that you would be taking a safety risk to use something out of a junk yard. Attached Images __________________ 72 Fleet (died) 78 Step (sold) 55 Step named Fred (sold) 00 F150 68 Step (named El Scorcho by PO) Build thread for the new El Scorcho http://67-72chevytrucks.com/vboard/s...d.php?t=392932

12-16-2010, 12:44 PM	#5
smn69 Registered User Join Date: Oct 2007 Location: Orem, Ut Posts: 132	Re: what are you guys doing for ..... I have the s10 belts. They are from the earlier s10 models with the single bolt mount. If you are a bigger person, you may need to find a way to lengthen out a bit. I have no problem using them, with all the cash for clunker cars in the yards, mine came out of a s10 that didn't even have a dented fender. Driver and passenger side only cost me $10.00.

12-16-2010, 03:19 PM	#7
dan76 Registered User Join Date: Mar 2008 Location: Salt Lake City UT Posts: 441	Re: what are you guys doing for ..... The 70 I just acquired has what looks to be a mounting point for a 3-point seat belt/shoulder harness on the B-pillar. As it's several hundred miles away right now I can't check or take a pic. Anyone pull the factory plug on this mounting point and determine it's for a shoulder belt?

12-16-2010, 03:50 PM	#8
Woody Registered User Join Date: Feb 2000 Location: Georgetown, KY, USA Posts: 631	Re: what are you guys doing for ..... The B-pillor threaded hole is for mounting the shoulder belt. it is a 7/16" fine thread IIRC. Woody

12-16-2010, 04:10 PM	#9
smn69 Registered User Join Date: Oct 2007 Location: Orem, Ut Posts: 132	Re: what are you guys doing for ..... I have a 69 and the B pillar mounting hole is there and it is a fine thread. A flywheel bolt will fit (if you need a size to compare it to).

12-16-2010, 04:22 PM	#10
A.P. Black 72 Chevy Join Date: May 2002 Location: Los Angeles, California Posts: 662	Re: what are you guys doing for ..... I'm doing jury duty and serfing this great site. I love it. This is whats keeping me awake. __________________ 72 Chevy, SWB, 350engine, TH400

12-16-2010, 09:04 PM	#11
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,280	Re: what are you guys doing for ..... I thought I read that the s-10 belts were a tight fit. I am 6'2 and go in at about 360ish, so I need all the room I can get! Those from wesco may be the ticket I have buddy buckets in this truck and did try some late model in my 70 it was rally cramped but I have put in a tilt that is almost all the way down [towards the dash]. I do have the anchor in the B-pillars for the 3 piont system and it is a 7/16 fine thread the floor is 1/2 coarse. Jim

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.