3 point seat belt hole - The 1947 - Present Chevrolet & GMC Truck Message Board Network

85burb · 01-02-2011, 02:43 AM

Do all 67-72 chevys and gmc have the threaded 3 top hole? The wife is looking at getting one for her dd and needs to have a car seat in it that uses a 3 point belt. Thanks.

jayman68 · 01-02-2011, 02:49 AM

I don't know about all, but mine does. It's a 68, pretty base model too. Good luck with the dd

Mike Bradbury · 01-02-2011, 03:01 AM

My '69 has them also.

**leddzepp** · 01-02-2011, 03:23 AM

I have seen 67's with them, so I would say yes.

**special-K** · 01-02-2011, 09:41 AM

Yes,they all had the shoulder belt mounting points.

cpetersen · 01-02-2011, 10:16 AM

The hole is threaded? Is there a nut on the back side?

hugger6933 · 01-02-2011, 10:49 AM

It is a anchor for a belt. The size is 1/2 fine thread[ my 68 is anyway] I belive that the belts were not mandated by the goverment until 71 model year if I recall correctly what I have read. Jim

cpetersen · 01-02-2011, 10:54 AM

I always thought it was just a plug? Good to know, I can just go to Chevy and pick up a new harness.

bosco200 · 01-02-2011, 12:31 PM

My 72 has them.

85burb · 01-02-2011, 02:08 PM

So every year has them and they are threded already great. Thanks for the fast input.

68 TT · 01-02-2011, 02:18 PM

Quote:

Originally Posted by 85burb

Do all 67-72 chevys and gmc have the threaded 3 top hole? The wife is looking at getting one for her dd and needs to have a car seat in it that uses a 3 point belt. Thanks.

My small window 67 C10 is as base model as they came and it has the mounting points for the shoulder belts with plugs in them.

I think it would be safe to say that all the 67-72's have the capability to have shoulder belts installed as it was probably an option for all the years.

treveiger · 01-02-2011, 02:41 PM

What 3 point harnesses work for these years of trucks? My girlfriend is uncomfortable riding in my truck without seatbelts

so i figure i need to get some before next time i go driving around. Are there any that just bolt up that are easy to find.

s102000 · 01-02-2011, 06:48 PM

Quote:

Originally Posted by treveiger

What 3 point harnesses work for these years of trucks? My girlfriend is uncomfortable riding in my truck without seatbelts

so i figure i need to get some before next time i go driving around. Are there any that just bolt up that are easy to find.

I'm wondering that myself..I found these (link below) but I'm not sure if they will mount up correct..If anyone knows please advise...

LMC trucks has the three point but they are 90 bucks each..I know there is no money limit on safety...

http://www.hidcountry.com/Products/l...erseatbelt.php

Boneyard · 01-02-2011, 07:33 PM

Here's one I was thinking about getting.
http://www.julianos.com/how2_67chevy_truck.html

hugger6933 · 01-02-2011, 08:58 PM

Those from the link above[ hid counrty] look really good for the price. They don't really look factory like they would have been there since the late 60's but, I"m not really going for that. The price is about 50 bucks per side cheaper than anything I've seen . If any one has tried these to know for sure post it up. I will be calling them soon. Jim

kcsa75 · 01-02-2011, 10:05 PM

Seat Belts Plus
http://www.seatbeltsplus.com/mm5/mer...Store_Code=sbp

Hubscrub · 01-02-2011, 11:22 PM

i just got some samples in from here lots of colorshttp://www.seatbeltplanet.com

Boneyard · 01-02-2011, 11:42 PM

Nice to see more color and buckle choices. They have some great options. I like this mounting hardware http://www.julianos.com/anchor_plate.html but not sure if it's just a gimmick to sell their product. I guess you have to buy the hardware separate anyway.

**FL71C10** · 01-03-2011, 12:01 AM

Has anyone installed something like this with a center lap belt as well?

s102000 · 01-03-2011, 12:04 PM

Quote:

Originally Posted by hugger6933

Those from the link above[ hid counrty] look really good for the price. They don't really look factory like they would have been there since the late 60's but, I"m not really going for that. The price is about 50 bucks per side cheaper than anything I've seen . If any one has tried these to know for sure post it up. I will be calling them soon. Jim

Let us know what you find out...Thanks

AZChevyland · 01-03-2011, 03:08 PM

Quote:

Originally Posted by s102000

Let us know what you find out...Thanks

I will keep an eye on this thread. My son wants the 3 point belts in his 67. His truck has the CST factory buckets so I guess we would want to use the web stem instead of the ridged stem. Any opinions? Sure wish the cheaper belt company made the metal push button buckles like the more expensive belts.

hugger6933 · 01-03-2011, 09:05 PM

I did'nt get a chance to call today, had to go pick a new wreck I bought. I borrowed a International rollback from a friend of mine to go get this truck and it has belts in it that look just like those in the pics from one of those advertisers. Just a thought there may be some possibilties there for a used seat belt. Jim

treveiger · 01-03-2011, 11:54 PM

Quote:

Originally Posted by s102000

LMC trucks has the three point but they are 90 bucks each..I know there is no money limit on safety...

http://www.hidcountry.com/Products/l...erseatbelt.php

Id say a couple eye bolts with some free pull strap tie downs for quads and bikes that i got from bike bandit would be my personal money limit for safety if it were just me

.

shiner2001 · 01-04-2011, 04:51 AM

I ordered a set from Ecklers, about $200 shipped. They also have the GM logo button, which I like alot. Comes with all the bolts needed to install. Also, my 72 had the holes for the upper mount as well, but it sounds like the consensus is already that all 67-72's do. I've had my belts for a few months and haven't put them in yet...maybe that's tomorrow's project

gkesseru · 01-04-2011, 11:14 AM

I installed a set from WESCO performance, and the price was very affordable. All four floor points needed an L bracket. See final page of my build thread below my signature for the results. They look and work great. I did have to drill one new hole for the driver outboard retractor, since the gas tank was in the way.

01-02-2011, 02:43 AM	#1
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	3 point seat belt hole Do all 67-72 chevys and gmc have the threaded 3 top hole? The wife is looking at getting one for her dd and needs to have a car seat in it that uses a 3 point belt. Thanks. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

01-02-2011, 02:49 AM	#2
jayman68 Fun Stuff Join Date: Jan 2010 Location: Sedro Woolley, WA Posts: 400	Re: 3 point seat belt hole I don't know about all, but mine does. It's a 68, pretty base model too. Good luck with the dd __________________ Jay 68 C10(project) 88 Honda Accord(DD) 93 Chevy Astro EXT 2wd

01-02-2011, 03:01 AM	#3
Mike Bradbury Registered User Join Date: Apr 2008 Location: San Diego California Posts: 1,316	Re: 3 point seat belt hole My '69 has them also. __________________ I'd rather attempt something great and fail.. than try something ordinary and succeed. Norman Vincent Peale Project: Barn Raising http://67-72chevytrucks.com/vboard/s...d.php?t=414961 Project: 30 Be Low https://67-72chevytrucks.com/vboard/...d.php?t=830583

01-02-2011, 03:23 AM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 3 point seat belt hole I have seen 67's with them, so I would say yes. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

01-02-2011, 09:41 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 3 point seat belt hole Yes,they all had the shoulder belt mounting points. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-02-2011, 10:16 AM	#6
cpetersen Registered User Join Date: Feb 2010 Location: mesa az Posts: 211	Re: 3 point seat belt hole The hole is threaded? Is there a nut on the back side?

01-02-2011, 10:49 AM	#7
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,280	Re: 3 point seat belt hole It is a anchor for a belt. The size is 1/2 fine thread[ my 68 is anyway] I belive that the belts were not mandated by the goverment until 71 model year if I recall correctly what I have read. Jim

01-02-2011, 10:54 AM	#8
cpetersen Registered User Join Date: Feb 2010 Location: mesa az Posts: 211	Re: 3 point seat belt hole I always thought it was just a plug? Good to know, I can just go to Chevy and pick up a new harness. Last edited by cpetersen; 01-02-2011 at 11:20 AM.

01-02-2011, 12:31 PM	#9
bosco200 Registered User Join Date: Dec 2009 Location: Ste. Genevieve, MO Posts: 526	Re: 3 point seat belt hole My 72 has them.

01-02-2011, 02:08 PM	#10
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: 3 point seat belt hole So every year has them and they are threded already great. Thanks for the fast input. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

01-02-2011, 02:41 PM	#12
treveiger Senior Member Join Date: Jul 2010 Location: South Dakota Posts: 4,093	Re: 3 point seat belt hole What 3 point harnesses work for these years of trucks? My girlfriend is uncomfortable riding in my truck without seatbeltsso i figure i need to get some before next time i go driving around. Are there any that just bolt up that are easy to find. __________________ 1969 Chevy c20(Miss Hackjob)

01-02-2011, 07:33 PM	#14
Boneyard Registered User Join Date: Apr 2004 Location: Waverly, NE Posts: 41	Re: 3 point seat belt hole Here's one I was thinking about getting. http://www.julianos.com/how2_67chevy_truck.html

01-02-2011, 08:58 PM	#15
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,280	Re: 3 point seat belt hole Those from the link above[ hid counrty] look really good for the price. They don't really look factory like they would have been there since the late 60's but, I"m not really going for that. The price is about 50 bucks per side cheaper than anything I've seen . If any one has tried these to know for sure post it up. I will be calling them soon. Jim

01-02-2011, 10:05 PM	#16
kcsa75 Registered User Join Date: Oct 2010 Location: Kansas City Posts: 3,590	Re: 3 point seat belt hole Seat Belts Plus http://www.seatbeltsplus.com/mm5/mer...Store_Code=sbp __________________ Willie Swamp Angel Truckers '72 C10 Highlander *People who blindly follow a GPS end up on television programs on The Weather Channel. Some survive, some don't.*

01-02-2011, 11:22 PM	#17
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: 3 point seat belt hole i just got some samples in from here lots of colorshttp://www.seatbeltplanet.com __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14



Register or Log In To remove these advertisements.

01-02-2011, 11:42 PM	#18
Boneyard Registered User Join Date: Apr 2004 Location: Waverly, NE Posts: 41	Re: 3 point seat belt hole Nice to see more color and buckle choices. They have some great options. I like this mounting hardware http://www.julianos.com/anchor_plate.html but not sure if it's just a gimmick to sell their product. I guess you have to buy the hardware separate anyway.

01-03-2011, 12:01 AM	#19
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: 3 point seat belt hole Has anyone installed something like this with a center lap belt as well? __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

01-03-2011, 09:05 PM	#22
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,280	Re: 3 point seat belt hole I did'nt get a chance to call today, had to go pick a new wreck I bought. I borrowed a International rollback from a friend of mine to go get this truck and it has belts in it that look just like those in the pics from one of those advertisers. Just a thought there may be some possibilties there for a used seat belt. Jim

01-04-2011, 04:51 AM	#24
shiner2001 Registered User Join Date: Sep 2010 Location: Fort Worth, TX Posts: 222	Re: 3 point seat belt hole I ordered a set from Ecklers, about $200 shipped. They also have the GM logo button, which I like alot. Comes with all the bolts needed to install. Also, my 72 had the holes for the upper mount as well, but it sounds like the consensus is already that all 67-72's do. I've had my belts for a few months and haven't put them in yet...maybe that's tomorrow's project __________________ Derek 72 Chevy Cheyenne Super LWB 454 SS LS6 90 GMC Suburban V2500 350 ----------- 64 Chevy El Camino 357 73 Jeep Wagoneer 360 78 Jeep Cherokee 360 79 Scout II 345 88 Jeep Wrangler 4.2L 91 Jeep Wrangler 4.3L 98 Lincoln Mark VIII 4.6L 01 GMC Yukon 5.3L *"If it's not broken, fix it 'till it is!"*

01-04-2011, 11:14 AM	#25
gkesseru Registered User Join Date: Dec 2009 Location: California, Maryland Posts: 544	Re: 3 point seat belt hole I installed a set from WESCO performance, and the price was very affordable. All four floor points needed an L bracket. See final page of my build thread below my signature for the results. They look and work great. I did have to drill one new hole for the driver outboard retractor, since the gas tank was in the way. __________________ 72 Fleet (died) 78 Step (sold) 55 Step named Fred (sold) 00 F150 68 Step (named El Scorcho by PO) Build thread for the new El Scorcho http://67-72chevytrucks.com/vboard/s...d.php?t=392932

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.