slik ricks 67 short wide CST - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevy1series · 01-04-2011, 11:40 PM

yes eric tell us were kinda considered brothers so no need to hide!

67chevylongbed · 01-04-2011, 11:50 PM

Planning on moving to Dallas/Fort Worth in the next few years unless this place improves a lot lol my dad is a contractor and there is no work out here but if he got a job we would probably stay

67chevy1series · 01-04-2011, 11:56 PM

well i hope to meet you before you move!

67chevylongbed · 01-05-2011, 12:06 AM

Quote:

Originally Posted by 67chevy1series

well i hope to meet you before you move!

I'm sure we will, I'm going to finish high school here for sure! and we might not even go because some good things are happening for us now so I think we will be staying but we shall see

67chevy1series · 01-05-2011, 12:11 AM

well if your ever puttin somthin together and you need some info call me up!

67silverbullet · 01-05-2011, 01:00 AM

Buddy your truck is looking good. I am glad to see young guys workin in the garage... I cant get me son off the Xbox.... Good job.

67chevy1series · 01-05-2011, 01:12 AM

what x box serious ge him out there helpin you on your 67 that should get him hooked after a couple times and thank yo very much sir!!

67chevylongbed · 01-05-2011, 01:40 AM

Quote:

Originally Posted by 67chevy1series

well if your ever puttin somthin together and you need some info call me up!

Will do!

67chevylongbed · 01-05-2011, 01:43 AM

Quote:

Originally Posted by 67silverbullet

Buddy your truck is looking good. I am glad to see young guys workin in the garage... I cant get me son off the Xbox.... Good job.

Oh man that's too bad! Try Rick's advice-if that doesn't work then I don't know what will.

67silverbullet · 01-05-2011, 01:54 AM

I just put some pics up.... Take a look.

67chevy1series · 01-05-2011, 01:56 AM

if that doesnt work force him to a 67 72 cali truck meeting

i would like to cruise cali in 2017 since our 67s will be 50 years old!!!!!!!!!

we shall get every 67 guy we can find!

67silverbullet · 01-05-2011, 02:09 AM

If I have my truck done by then.... These thing cost alot to build.... lol

67chevy1series · 01-05-2011, 02:12 AM

i feel ya! i hope mine will be done then as well any pictures of your post em up!

67chevy1series · 01-05-2011, 02:15 AM

oh and welcome you seem to be a new member if you need any help with your 67 pm me here is some slang that boys on this site talk

pm= private message

ttt = to the top brings a thread to the top of all the others

bump= the same thing that ttt means

LMK = let me know

67silverbullet · 01-05-2011, 02:16 AM

I just added some on my thread.

67silverbullet · 01-05-2011, 02:17 AM

Thanks buddy..

67chevy1series · 01-05-2011, 02:22 AM

Quote:

Originally Posted by 67silverbullet

I just added some on my thread.

sweet project!

Quote:

Originally Posted by 67silverbullet

Thanks buddy..

your welcome /rick

JRBECK64 · 01-05-2011, 03:07 AM

Quote:

Originally Posted by 67chevy1series

this is a 302 that was done original style , hope you like it

this is what it would look like if you poped the hood on a 69 z 28 camaro!!!!

I dont think you have a big enough carb to get that thing started and running.LOL Nice job on the Engine. That will look great under the hood.

JRBECK64

spike38 · 01-05-2011, 10:05 AM

Rick

I had a 69 camaro, With a DZ302.
The best combination I found for street and strip,
Was an Edelbrock performer, With a 650 double pumper Holley,
And MSD6 coil,
That was a few years back though.
Today, I would probably still go with the Edelbrock,
But upgrade to a 670 Avenger Holley, With HEI ignition.
If you want to keep it a little milder, Go with a 570 Avenger,
Or a 600cfm Box Holley 4 barrel.

Spike

67chevy1series · 01-05-2011, 07:10 PM

Quote:

Originally Posted by JRBECK64

I dont think you have a big enough carb to get that thing started and running.LOL Nice job on the Engine. That will look great under the hood.

JRBECK64

well that pic wasnt of mine but i have put mine in my truck already but thanks anyways!!!

Quote:

Originally Posted by spike38

Rick

I had a 69 camaro, With a DZ302.
The best combination I found for street and strip,
Was an Edelbrock performer, With a 650 double pumper Holley,
And MSD6 coil,
That was a few years back though.
Today, I would probably still go with the Edelbrock,
But upgrade to a 670 Avenger Holley, With HEI ignition.
If you want to keep it a little milder, Go with a 570 Avenger,
Or a 600cfm Box Holley 4 barrel.

Spike

i will keep that in mind if it doesnt run right or if it drinks too much gas

67chevy1series · 01-05-2011, 11:08 PM

am i mistaken or was i sopposed to get pictures???

oldblue1968chevy · 01-05-2011, 11:23 PM

from me? no but i can get some morrow its past my bedtime here (diff. time zone than ca)

67chevy1series · 01-05-2011, 11:30 PM

no i was jokin about me 67chevylongbed wanted pics

67chevylongbed · 01-05-2011, 11:35 PM

Yep, and he still does

67chevy1series · 01-05-2011, 11:35 PM

well here is some pics sorry it was getting dark when they came home with the picture taker and it was and is about 39 degrees!!!! while i was outside you could see my breath!!! it was cold my fingers got num and had to go inside and eat and get warmed up

01-04-2011, 11:40 PM	#476
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST yes eric tell us were kinda considered brothers so no need to hide!

01-04-2011, 11:50 PM	#477
67chevylongbed Registered User Join Date: May 2009 Location: Carmichael, California Posts: 576	Re: slik ricks 67 short wide CST Planning on moving to Dallas/Fort Worth in the next few years unless this place improves a lot lol my dad is a contractor and there is no work out here but if he got a job we would probably stay __________________ Eric 1967 C10 LWB SOLD.... 1995 Ford F-250 4x4 Powerstroke, 342k "Each generation goes further than the generation preceding it because it stands on the shoulders of that generation. You will have opportunities beyond anything we've ever known." -Ronald Reagan

01-04-2011, 11:56 PM	#478
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well i hope to meet you before you move!

01-05-2011, 12:11 AM	#480
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well if your ever puttin somthin together and you need some info call me up!

01-05-2011, 01:00 AM	#481
67silverbullet Registered User Join Date: Dec 2010 Location: San Jacinto, Cali Posts: 10	Re: slik ricks 67 short wide CST Buddy your truck is looking good. I am glad to see young guys workin in the garage... I cant get me son off the Xbox.... Good job.

01-05-2011, 01:12 AM	#482
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST what x box serious ge him out there helpin you on your 67 that should get him hooked after a couple times and thank yo very much sir!!

01-05-2011, 01:54 AM	#485
67silverbullet Registered User Join Date: Dec 2010 Location: San Jacinto, Cali Posts: 10	Re: slik ricks 67 short wide CST I just put some pics up.... Take a look.

01-05-2011, 01:56 AM	#486
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST if that doesnt work force him to a 67 72 cali truck meeting i would like to cruise cali in 2017 since our 67s will be 50 years old!!!!!!!!! we shall get every 67 guy we can find!

01-05-2011, 02:09 AM	#487
67silverbullet Registered User Join Date: Dec 2010 Location: San Jacinto, Cali Posts: 10	Re: slik ricks 67 short wide CST If I have my truck done by then.... These thing cost alot to build.... lol

01-05-2011, 02:12 AM	#488
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST i feel ya! i hope mine will be done then as well any pictures of your post em up!

01-05-2011, 02:15 AM	#489
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST oh and welcome you seem to be a new member if you need any help with your 67 pm me here is some slang that boys on this site talk pm= private message ttt = to the top brings a thread to the top of all the others bump= the same thing that ttt means LMK = let me know

01-05-2011, 02:16 AM	#490
67silverbullet Registered User Join Date: Dec 2010 Location: San Jacinto, Cali Posts: 10	Re: slik ricks 67 short wide CST I just added some on my thread.

01-05-2011, 02:17 AM	#491
67silverbullet Registered User Join Date: Dec 2010 Location: San Jacinto, Cali Posts: 10	Re: slik ricks 67 short wide CST Thanks buddy..

01-05-2011, 10:05 AM	#494
spike38 Registered User Join Date: Jun 2010 Location: Leesburg GA Posts: 547	Re: slik ricks 67 short wide CST Rick I had a 69 camaro, With a DZ302. The best combination I found for street and strip, Was an Edelbrock performer, With a 650 double pumper Holley, And MSD6 coil, That was a few years back though. Today, I would probably still go with the Edelbrock, But upgrade to a 670 Avenger Holley, With HEI ignition. If you want to keep it a little milder, Go with a 570 Avenger, Or a 600cfm Box Holley 4 barrel. Spike __________________ 68 stepside http://67-72chevytrucks.com/vboard/s...0&goto=newpost

01-05-2011, 11:08 PM	#496
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST am i mistaken or was i sopposed to get pictures???



Register or Log In To remove these advertisements.

01-05-2011, 11:23 PM	#497
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST from me? no but i can get some morrow its past my bedtime here (diff. time zone than ca) __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-05-2011, 11:30 PM	#498
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST no i was jokin about me 67chevylongbed wanted pics

01-05-2011, 11:35 PM	#499
67chevylongbed Registered User Join Date: May 2009 Location: Carmichael, California Posts: 576	Re: slik ricks 67 short wide CST Yep, and he still does __________________ Eric 1967 C10 LWB SOLD.... 1995 Ford F-250 4x4 Powerstroke, 342k "Each generation goes further than the generation preceding it because it stands on the shoulders of that generation. You will have opportunities beyond anything we've ever known." -Ronald Reagan

01-05-2011, 11:35 PM	#500
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well here is some pics sorry it was getting dark when they came home with the picture taker and it was and is about 39 degrees!!!! while i was outside you could see my breath!!! it was cold my fingers got num and had to go inside and eat and get warmed up Last edited by 67chevy1series; 01-05-2011 at 11:40 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.