What did you do to your truck today! - Page 53 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bc gman · 01-11-2011, 12:28 AM

I put the door handles back on put the new tailgate trim on,window felt.

k7elh · 01-11-2011, 12:39 AM

I drove it to work, then drove it home again...

60ratrod · 01-11-2011, 12:58 AM

looked at parts for it. mostly on ebay

dixietruck71 · 01-11-2011, 09:43 AM

i drove it to work, drove home. then polished 2 of my slot mags. its way to much work but worth it in the end.

Dano69c10 · 01-11-2011, 01:48 PM

Quote:

Originally Posted by glider_6969

Updated pic of the new steering wheel, and completed the install on the new floorshifter and linkage and removed shifter off the column.

Hey Glider,
Do have a high hump or low hump cab? Is that a hurst shifter? I like the way that setup looks.
Dano

glider_6969 · 01-11-2011, 08:51 PM

Quote:

Originally Posted by Dano69c10

Hey Glider,
Do have a high hump or low hump cab? Is that a hurst shifter? I like the way that setup looks.
Dano

Hey Dano, thanks,
I have a low hump. I originally did buy a Hurst but sent it back , the shifter seemed like it was going to be a bit short and I didn't want to have to lean forward to have to shift, plus it was about $100 bucks more than the one I put in which is from MR. Gasket, I did the install by myself, it wasn't to bad. almost forgot, the Hurst kit didn't even come with shifter boot cover. I would have had to buy that extra.

Navy Mechanic · 01-11-2011, 08:59 PM

Removed driver's side A-arm, spindle, rotor, spring, shock...

Install new components tomorrow.

70 net440 · 01-11-2011, 11:15 PM

Drove my kid's '71 K-10 to work, then to hoop practice, then home.

*project 67 sub* · 01-12-2011, 12:09 AM

bought anther set of bags, some 2600 doms and some fittings and line to run it on shraders. will be putting those in the back, and removing the dual 3/4 port 4 ply 2600 contis from the rear and putting them in the front when im ready. also bought a few more tools to use when i work on my truck.

Dano69c10 · 01-12-2011, 01:05 AM

Got the crossmember off today;

mcmlxix · 01-12-2011, 01:11 AM

Ordered a DIY4X rear flip kit to get rid of the blocks and get read for the 14bff...

k7elh · 01-12-2011, 02:13 AM

Quote:

Originally Posted by dixietruck71

i drove it to work, drove home. then polished 2 of my slot mags. its way to much work but worth it in the end.

These old slot mags just scream classic IMO... I love em. When I was a kid (many moons ago), I bought a set of mags for my first car, and they didn't fit. I kept them, thinking one day I might be able to use them. My dad told me to get rid of them, so I hid them under my bed! I got to use them after all when they fit my next car perfectly. Now if I could find a cheap set for my truck...

alwaysbroken · 01-12-2011, 02:34 AM

i watched it snow.

jakeblues652 · 01-12-2011, 02:50 AM

Quote:

Originally Posted by alwaysbroken

i watched it snow.

i was waiting by the window for the snow! oh, and i tested the posi

dixietruck71 · 01-12-2011, 02:36 PM

Quote:

Originally Posted by k7elh

These old slot mags just scream classic IMO... I love em. When I was a kid (many moons ago), I bought a set of mags for my first car, and they didn't fit. I kept them, thinking one day I might be able to use them. My dad told me to get rid of them, so I hid them under my bed! I got to use them after all when they fit my next car perfectly. Now if I could find a cheap set for my truck...

what lug pattern do you need? i have lots of mags and if i dont have any i can usually get them for 25 bucks each

AZChevyland · 01-12-2011, 03:28 PM

Well it was the weekend but GOT THE WHEELS ON!

oldblue1968chevy · 01-12-2011, 03:47 PM

gonna look good!! ^ boss?

robertadkinsjr · 01-12-2011, 03:54 PM

Finally got the engine in. Now just gotta rerun wiring, hoses, vacuum lines, fuel lines, and button up.

BossHogg69 · 01-12-2011, 04:09 PM

Got the motor & trans set down in the frame (mock up), had to dimple the #1 primary tube to clear the motor mount bracket. Now I gotta hack up my brand new trans crossmember to work on my Tremec TKO trans

magwakeenercew2jh · 01-12-2011, 04:42 PM

Quote:

Originally Posted by robertadkinsjr

Finally got the engine in. Now just gotta rerun wiring, hoses, vacuum lines, fuel lines, and button up.

Don't forget the monkey wrench.

helldiablo · 01-12-2011, 05:01 PM

nothing, looked at her, and said "soon enough sweetie" soon enough".... i dont think Society is ready for my truck to come out of hibernation.. but i think i gave Society a long enough break.... hahahaha.. they'll never take me alive!!!

bigdogboxers · 01-12-2011, 05:06 PM

I have watched the tire slowly loose air over the past few weeks....

Dano69c10 · 01-12-2011, 05:11 PM

Dropped the rear suspension from the frame;

Finsihed gutting the cab, getting ready to separate the cab from the frame.

Dano

Gene · 01-12-2011, 05:12 PM

Re-installed dash wiring and started hooking up new under hood and front light harnesses.

*project 67 sub* · 01-12-2011, 07:39 PM

ordered a double adjustable panhard bar from porterbuilt

. i already cant wait for it

01-11-2011, 12:28 AM	#1301
bc gman 71 bb longhorn Join Date: May 2004 Location: Surrey B.C Canada Posts: 170	Re: What did you do to your truck today! I put the door handles back on put the new tailgate trim on,window felt. __________________ 71 2500 Gmc longhorn with a 402 turbo 400. 09 F150 Supercrew 4x4 05 Mazda 6 sport accept that somedays you are the statue and somedays you are the pigeon.

01-11-2011, 12:39 AM	#1302
k7elh Registered User Join Date: Jul 2010 Location: Fallbrook, CA Posts: 65	Re: What did you do to your truck today! I drove it to work, then drove it home again... __________________ Eric Hutchins 1970 Chevy C10 CST

01-11-2011, 12:58 AM	#1303
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	Re: What did you do to your truck today! looked at parts for it. mostly on ebay __________________ ERROR 404....... SNAPPY COMEBACK NOT FOUND _______________________________________________________________________________________________ -60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination" -07 gmt900 silverado 1500 lt xcab z71, granite blue -81 suzuki gs650g "shelah"- current project -81 kz1000m1 csr "sarge" -next project (just beautification) -07 kawasaki vulcan classic vn900

01-11-2011, 09:43 AM	#1304
dixietruck71 Registered User Join Date: Dec 2010 Location: ravensdale washington Posts: 111	Re: What did you do to your truck today! i drove it to work, drove home. then polished 2 of my slot mags. its way to much work but worth it in the end. Attached Images __________________ 71 gme Sierra Grande lwb. 68 Rambler American 2 door 75 jeep cj5

01-11-2011, 08:59 PM	#1307
Navy Mechanic Registered User Join Date: Nov 2010 Location: Richmond, TX. Posts: 127	Re: What did you do to your truck today! Removed driver's side A-arm, spindle, rotor, spring, shock... Install new components tomorrow. Attached Images __________________ *"Once a Chief, always a Chief!" MCPO (ret)* 03 2500HD- 'Daily driver' 67 Short Fleet- 'Drivable project!' 11 Malibu LTZ- 'The Wife's ride'

01-11-2011, 11:15 PM	#1308
70 net440 Junior Member Join Date: Sep 2003 Location: yreka, ca Posts: 270	Re: What did you do to your truck today! Drove my kid's '71 K-10 to work, then to hoop practice, then home. __________________ 63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10

01-12-2011, 12:09 AM	#1309
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: What did you do to your truck today! bought anther set of bags, some 2600 doms and some fittings and line to run it on shraders. will be putting those in the back, and removing the dual 3/4 port 4 ply 2600 contis from the rear and putting them in the front when im ready. also bought a few more tools to use when i work on my truck.

01-12-2011, 01:05 AM	#1310
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: What did you do to your truck today! Got the crossmember off today; __________________ '69 Fleet It ain't yours, if you didn't build it!

01-12-2011, 01:11 AM	#1311
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: What did you do to your truck today! Ordered a DIY4X rear flip kit to get rid of the blocks and get read for the 14bff... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

01-12-2011, 02:34 AM	#1313
alwaysbroken Registered User Join Date: Dec 2010 Location: sooke canada Posts: 211	Re: What did you do to your truck today! i watched it snow. __________________ chevys the way to go.

01-12-2011, 03:28 PM	#1316
AZChevyland Registered User Join Date: Apr 2010 Location: Phoenix Arizona Posts: 69	Re: What did you do to your truck today! Well it was the weekend but GOT THE WHEELS ON! Attached Images __________________ J&S Sideyard Projects......we will be at...... Dino's 3rd annual Pre-ShowGit Down

01-12-2011, 03:47 PM	#1317
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: What did you do to your truck today! gonna look good!! ^ boss? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-12-2011, 03:54 PM	#1318
robertadkinsjr Registered User Join Date: May 2007 Location: sac cal. Posts: 3	Re: What did you do to your truck today! Finally got the engine in. Now just gotta rerun wiring, hoses, vacuum lines, fuel lines, and button up. Attached Images

01-12-2011, 04:09 PM	#1319
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: What did you do to your truck today! Got the motor & trans set down in the frame (mock up), had to dimple the #1 primary tube to clear the motor mount bracket. Now I gotta hack up my brand new trans crossmember to work on my Tremec TKO trans Attached Images __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

01-12-2011, 05:01 PM	#1321
helldiablo Registered User Join Date: Nov 2010 Location: northern california Posts: 105	Re: What did you do to your truck today! nothing, looked at her, and said "soon enough sweetie" soon enough".... i dont think Society is ready for my truck to come out of hibernation.. but i think i gave Society a long enough break.... hahahaha.. they'll never take me alive!!!



Register or Log In To remove these advertisements.

01-12-2011, 05:06 PM	#1322
bigdogboxers Registered User Join Date: Aug 2009 Location: Rathdrum Idaho Posts: 197	Re: What did you do to your truck today! I have watched the tire slowly loose air over the past few weeks....

01-12-2011, 05:11 PM	#1323
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: What did you do to your truck today! Dropped the rear suspension from the frame; Finsihed gutting the cab, getting ready to separate the cab from the frame. Dano __________________ '69 Fleet It ain't yours, if you didn't build it!

01-12-2011, 05:12 PM	#1324
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	Re: What did you do to your truck today! Re-installed dash wiring and started hooking up new under hood and front light harnesses.

01-12-2011, 07:39 PM	#1325
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: What did you do to your truck today! ordered a double adjustable panhard bar from porterbuilt . i already cant wait for it

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.