KS 71 1/2 2wd cheyenne with AC getting parted soon - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c1069 · 01-18-2011, 01:41 AM

I'll take the ds vent window (if is tinted glass) and cigarette lighter assy pending ship to 93250. Thanks

blap · 01-18-2011, 06:21 AM

Randy,
How is the condition of the kickdown cable w/ bracket & throttle cable ?
Interested .Thanks Brad

snarfy · 01-18-2011, 09:01 AM

Randy
I need the body side molding trim clips. I need the ones without the threaded mounting stud & nut. I'll take all you can get off undamaged. Just let me know price.

teeitup · 01-18-2011, 09:18 AM

c1069, sorry only going to sell in the pair. I'll sell cig assembley and wire though

Blap, Brad, sorry its been sold already before I posted truck on here

snarfy, sorry clips go with the trim

Thanks Randy

Wootdog · 01-18-2011, 09:34 AM

Randy,
How are the door guts, door windows and vent window assemblies? (All the internals for both doors)? Would you ship? 23462
Thanks,
Kerry

teeitup · 01-18-2011, 09:56 AM

Kerry, I'll check condition of guts. I only ship wing windows no other glass, sorry. Thanks Randy

snarfy · 01-18-2011, 11:33 AM

Randy
How much for the upper side molding trim wth all the clips? Ship to 46514

CircusWagonJim · 01-18-2011, 12:03 PM

I'm sure at 2 am I posted I'd take the radio with knobs & mounting brackets and now the post is gone?

**Ironhorse** · 01-18-2011, 01:32 PM

Randy, Interested in the two wheel caps pictured on the rear wheels. Just the two or do you have all four? Any dings or dents, what sort of $$ are you asking for them?

1956cameo · 01-18-2011, 01:49 PM

How much for the valve covers and the oil filler tube that goes on the D/S valve cover? Also do you have a set of factory small block v8 power steering pump brackets for sale without the pump? Thanks!

teeitup · 01-18-2011, 01:59 PM

guys its a whopping 22 degrees today so it don't look like I'll be outside parting, next 4 days look the same but colder and snowy, sorry

snarfy, driver quality upper trim with a few dings with all clips $25 plus shipping, and I shipped a set a month ago it was like $35. They are driver quality, and the frotn and rear clips will break when I try to remove, they always do

CircuswagonJim, radio is yours, I'll let you know when I get it out

Ironhorse, Gary, I'll check them out

1956Cameo, valve covers $15 for pair, oil filler with grommet and cap $20 all plus shipping. Sorry only brackets I have are with this pump. Pump, hoses and brackets are $40 or brackets alone are $40 plus shipping

Thanks Randy

1956cameo · 01-18-2011, 05:22 PM

I will take oil tube and valve covers. Just PM me your payment info. I can send Paypal or check. Thanks!

teeitup · 01-18-2011, 05:52 PM

1956cameo, I just went out there and valve cover on pass side is dented up quite a bit, I have 2 driver side ones but not other good pass side. Thanks Randy

1956cameo · 01-18-2011, 05:59 PM

No problem. Just keep me in mind and I will get a pair from you later. I will still take the oil tube though.

Wootdog · 01-18-2011, 06:02 PM

Randy,
So you don't ship window glass? Darn.
Kerry

apollos1970 · 01-18-2011, 06:05 PM

hey how much for the headliner trim and clips also what shape is it in shipped to 33334

snarfy · 01-18-2011, 07:17 PM

I'll pass on the trim. I really only need the clips & if they break, they won't do me ny good.

teeitup · 01-18-2011, 07:40 PM

OK guys I ended up working out there for 3 hours this afternoon when it got up to 23 degrees

, got some of it parted I'll post pics later this evening. I think I got most everything off that you all asked about plus a few more things. Thanks Randy

teeitup · 01-18-2011, 07:42 PM

1956cameo, sorry about the valve covers. The oil filler is good but the cap fits a little loose, I didn't try to take it off since it was so cold

Wootdog, Kerry, sorry it gets broke to easy

Apollos1970, its not any good, sorry

Snarfy, no problem

Thanks Randy

apollos1970 · 01-18-2011, 08:21 PM

thanks anyway and good luck with sales

gsd66nova · 01-18-2011, 09:00 PM

Hey Randy, I'm intrested in the seat belts can you post some pics of them? Thanks, Shane.

teeitup · 01-18-2011, 09:01 PM

Apollos, THANK YOU
Shane, sure will when I get them out but it may be next week, we are supposed to get 7 inches of snow starting tomorrow
Thanks Randy

gsd66nova · 01-18-2011, 09:03 PM

Hey man, I don't blame you for not wanting to get out in that mess, I'm in no hurry. Thanks, Shane.

chipflyer · 01-18-2011, 09:57 PM

Randy,
interested in those mirrors, how are they? Is the left mirror glass broken, any dents?

Jeff

teeitup · 01-18-2011, 10:04 PM

Thanks Shane
Jeff, I think they are Ok except pass mirror arm is broke BUT I may have another one in the shop, I'll have to look, you know how organized it is

Also get your tractor out and ready for the SNOW!!!!!!

Thanks Randy

01-18-2011, 01:41 AM	#26
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 71 1/2 2wd cheyenne with AC getting parted soon I'll take the ds vent window (if is tinted glass) and cigarette lighter assy pending ship to 93250. Thanks

01-18-2011, 06:21 AM	#27
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: 71 1/2 2wd cheyenne with AC getting parted soon Randy, How is the condition of the kickdown cable w/ bracket & throttle cable ? Interested .Thanks Brad

01-18-2011, 09:01 AM	#28
snarfy Registered User Join Date: Jul 2005 Location: Minnesota Posts: 7	Re: 71 1/2 2wd cheyenne with AC getting parted soon Randy I need the body side molding trim clips. I need the ones without the threaded mounting stud & nut. I'll take all you can get off undamaged. Just let me know price.

01-18-2011, 09:18 AM	#29
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon c1069, sorry only going to sell in the pair. I'll sell cig assembley and wire though Blap, Brad, sorry its been sold already before I posted truck on here snarfy, sorry clips go with the trim Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 01-18-2011 at 04:02 PM.

01-18-2011, 09:34 AM	#30
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,677	Re: 71 1/2 2wd cheyenne with AC getting parted soon Randy, How are the door guts, door windows and vent window assemblies? (All the internals for both doors)? Would you ship? 23462 Thanks, Kerry __________________ 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

01-18-2011, 09:56 AM	#31
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon Kerry, I'll check condition of guts. I only ship wing windows no other glass, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-18-2011, 11:33 AM	#32
snarfy Registered User Join Date: Jul 2005 Location: Minnesota Posts: 7	Re: 71 1/2 2wd cheyenne with AC getting parted soon Randy How much for the upper side molding trim wth all the clips? Ship to 46514

01-18-2011, 12:03 PM	#33
CircusWagonJim Registered User Join Date: Dec 1999 Location: Burbank, CA Posts: 707	Re: 71 1/2 2wd cheyenne with AC getting parted soon I'm sure at 2 am I posted I'd take the radio with knobs & mounting brackets and now the post is gone?

01-18-2011, 01:32 PM	#34
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: 71 1/2 2wd cheyenne with AC getting parted soon Randy, Interested in the two wheel caps pictured on the rear wheels. Just the two or do you have all four? Any dings or dents, what sort of $$ are you asking for them? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-18-2011, 01:49 PM	#35
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: 71 1/2 2wd cheyenne with AC getting parted soon How much for the valve covers and the oil filler tube that goes on the D/S valve cover? Also do you have a set of factory small block v8 power steering pump brackets for sale without the pump? Thanks! __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry Last edited by 1956cameo; 01-18-2011 at 01:49 PM.

01-18-2011, 01:59 PM	#36
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon guys its a whopping 22 degrees today so it don't look like I'll be outside parting, next 4 days look the same but colder and snowy, sorry snarfy, driver quality upper trim with a few dings with all clips $25 plus shipping, and I shipped a set a month ago it was like $35. They are driver quality, and the frotn and rear clips will break when I try to remove, they always do CircuswagonJim, radio is yours, I'll let you know when I get it out Ironhorse, Gary, I'll check them out 1956Cameo, valve covers $15 for pair, oil filler with grommet and cap $20 all plus shipping. Sorry only brackets I have are with this pump. Pump, hoses and brackets are $40 or brackets alone are $40 plus shipping Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-18-2011, 05:22 PM	#37
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: 71 1/2 2wd cheyenne with AC getting parted soon I will take oil tube and valve covers. Just PM me your payment info. I can send Paypal or check. Thanks! __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry Last edited by 1956cameo; 01-18-2011 at 05:49 PM.

01-18-2011, 05:52 PM	#38
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon 1956cameo, I just went out there and valve cover on pass side is dented up quite a bit, I have 2 driver side ones but not other good pass side. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-18-2011, 05:59 PM	#39
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: 71 1/2 2wd cheyenne with AC getting parted soon No problem. Just keep me in mind and I will get a pair from you later. I will still take the oil tube though. __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

01-18-2011, 06:02 PM	#40
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,677	Re: 71 1/2 2wd cheyenne with AC getting parted soon Randy, So you don't ship window glass? Darn. Kerry __________________ 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT



Register or Log In To remove these advertisements.

01-18-2011, 06:05 PM	#41
apollos1970 Registered User Join Date: Oct 2009 Location: Fort Lauderdale, FL Posts: 70	Re: 71 1/2 2wd cheyenne with AC getting parted soon hey how much for the headliner trim and clips also what shape is it in shipped to 33334 __________________ 1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver

01-18-2011, 07:17 PM	#42
snarfy Registered User Join Date: Jul 2005 Location: Minnesota Posts: 7	Re: 71 1/2 2wd cheyenne with AC getting parted soon I'll pass on the trim. I really only need the clips & if they break, they won't do me ny good.

01-18-2011, 07:40 PM	#43
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon OK guys I ended up working out there for 3 hours this afternoon when it got up to 23 degrees, got some of it parted I'll post pics later this evening. I think I got most everything off that you all asked about plus a few more things. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-18-2011, 07:42 PM	#44
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon 1956cameo, sorry about the valve covers. The oil filler is good but the cap fits a little loose, I didn't try to take it off since it was so cold Wootdog, Kerry, sorry it gets broke to easy Apollos1970, its not any good, sorry Snarfy, no problem Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-18-2011, 08:21 PM	#45
apollos1970 Registered User Join Date: Oct 2009 Location: Fort Lauderdale, FL Posts: 70	Re: 71 1/2 2wd cheyenne with AC getting parted soon thanks anyway and good luck with sales __________________ 1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver

01-18-2011, 09:00 PM	#46
gsd66nova Registered User Join Date: Dec 2010 Location: Milton TN. Posts: 108	Re: 71 1/2 2wd cheyenne with AC getting parted soon Hey Randy, I'm intrested in the seat belts can you post some pics of them? Thanks, Shane.

01-18-2011, 09:01 PM	#47
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon Apollos, THANK YOU Shane, sure will when I get them out but it may be next week, we are supposed to get 7 inches of snow starting tomorrow Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-18-2011, 09:03 PM	#48
gsd66nova Registered User Join Date: Dec 2010 Location: Milton TN. Posts: 108	Re: 71 1/2 2wd cheyenne with AC getting parted soon Hey man, I don't blame you for not wanting to get out in that mess, I'm in no hurry. Thanks, Shane.

01-18-2011, 09:57 PM	#49
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: 71 1/2 2wd cheyenne with AC getting parted soon Randy, interested in those mirrors, how are they? Is the left mirror glass broken, any dents? Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241. Last edited by chipflyer; 01-18-2011 at 09:58 PM.

01-18-2011, 10:04 PM	#50
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon Thanks Shane Jeff, I think they are Ok except pass mirror arm is broke BUT I may have another one in the shop, I'll have to look, you know how organized it is Also get your tractor out and ready for the SNOW!!!!!! Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode