NV4500 + Jeep Dana 300?

[lindstromjd]

Anyone ever done this combo before? I'm looking at doing it because:

a.) I have a 95 GM NV4500 sitting around with no transfer case
b.) I have a passenger side drop set up in my truck
c.) I want a gear to gear t-case, and NP205's with a round pattern are impossible to find
d.) I just picked up the Dana 300 for $150

So, I guess the question is if anyone has any experience with doing this? I know that the transmission to transfer case pattern is the same as long as I leave out one bolt, and that the NV4500 has a 32 spline output, and the Dana 300 has a 23 spline input. So all I should have to do (theoretically) is buy a 32 spline input shaft like this one: http://www.polyperformance.com/shop/...s-p-26324.html and it should work, right? Or am I totally missing something here?

[88bagedntaged]

Well I can say that I have a Dana 20 and I'm Doubling it on a NP203. And you would have thought I wanted the key to the city, to do some machine work. But it looks to be a strait shot !! from the link and what I have and know about the Dana t-cases