Paint the aftermarket radiator brackets? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

t76turbo · 02-28-2011, 02:52 PM

I got a set from LMC since I am upgrading from 2-3 row to the 4 row size.

The ones from LMC, which I imagine are the same as the other retailers of repop parts, have a shiney coating. Almost like a galvanized finish. Just curious if anyone has left them bare and how they held up? Or if they should be painted to maintain longevity?

DT1 · 02-28-2011, 02:59 PM

I've never bought radiator brackets from LMC (Or anywhere else for that matter) but if the finish you describe is zinc or Galv.,you can install them without paint. Personally, I'd paint them.

02-28-2011, 02:52 PM	#1
t76turbo Registered User Join Date: Dec 2010 Location: N.E. Florida Posts: 215	Paint the aftermarket radiator brackets? I got a set from LMC since I am upgrading from 2-3 row to the 4 row size. The ones from LMC, which I imagine are the same as the other retailers of repop parts, have a shiney coating. Almost like a galvanized finish. Just curious if anyone has left them bare and how they held up? Or if they should be painted to maintain longevity? __________________ 1970 Shortbed 2wd C-10

02-28-2011, 02:59 PM	#2
DT1 Registered User Join Date: Oct 2009 Location: Gardnerville Nv No Mo Cali!! Posts: 869	Re: Paint the aftermarket radiator brackets? I've never bought radiator brackets from LMC (Or anywhere else for that matter) but if the finish you describe is zinc or Galv.,you can install them without paint. Personally, I'd paint them.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.