brake question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76bonanza · 07-13-2003, 10:21 AM

Maybe doing brakes and rotors soon.

What brand and from were is a good rotor and pad option?

4x4 daily driver light offroad use.

Thanks

**old Rusty C10** · 07-13-2003, 10:28 AM

i can tell you with confidence to stay away fromt he pep boys brand rotor and drums every time ive bought one theyve warped in an insanely quick amount of time Ive had good luck with wagner brake parts in the past tho

sbc350gearhead · 07-13-2003, 11:16 AM

I bought cross-drilled and slotted rotors and titanium ti pads from JC. Whitney that I am very impressed with. The napa made in usa upscale rotors are pretty good as well. Performance Friction carbon metallic pads work very well, but they dust like you would not believe.......I had to clean my wheels every 3 days with those pads.

Krosati · 07-13-2003, 01:31 PM

I just bought front and rear setups from O'Rielly Auto Parts and was given 2 options. Cheap or better. The cheap came from Mexico and the the Others wer made in Canada. After comparing the two in the store. I went with the Canandian made parts. They were much thicker, nicely finished castings that looked VERY close to the OEM pieces I removed. The calipers were preloaded with metallic pads, the rotors came with studs and races installed. The rear drums were beefy and included the knockout rubber plugs. I was pretty pleased with the overall quality.
Total cost for calipers, rotors, drums, shoes, a wheel cylinder, drivers ebrake cable, 2 cans brake cleaner, and a quart of fluid = $354

Mike76251 · 07-13-2003, 02:40 PM

I second the Pep Boys warning on their $40 rotors..........they warp in no time. So do GM's from my experience.
Performance Friction carbon metallic pads last a VERY long time but they do dust alot and are hard on rotors.

boataddict26 · 07-13-2003, 03:47 PM

I just bought all my brake parts from Discount. They are made by Wearever. Seem to be really good quality.

apstguy · 07-13-2003, 07:55 PM

I have heard good about Raybestos, but our 99 Tahoe warped their rotors in less than a week. Of course, we think it is warping the slotted/crossdrilled rotors we have on it now (how I don't know!)

07-13-2003, 10:21 AM	#1
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	brake question Maybe doing brakes and rotors soon. What brand and from were is a good rotor and pad option? 4x4 daily driver light offroad use. Thanks __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

07-13-2003, 10:28 AM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	i can tell you with confidence to stay away fromt he pep boys brand rotor and drums every time ive bought one theyve warped in an insanely quick amount of time Ive had good luck with wagner brake parts in the past tho __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

07-13-2003, 03:47 PM	#6
boataddict26 Registered User Join Date: Mar 2003 Location: North Central Florida Posts: 726	I just bought all my brake parts from Discount. They are made by Wearever. Seem to be really good quality. __________________ 1978 Chevy C10 Currently under resto. 350 Getting face lift. .060, JEpistons, Modify heads. More will come with money.

07-13-2003, 07:55 PM	#7
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	I have heard good about Raybestos, but our 99 Tahoe warped their rotors in less than a week. Of course, we think it is warping the slotted/crossdrilled rotors we have on it now (how I don't know!) __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-13-2003, 11:16 AM	#3
sbc350gearhead Registered User Join Date: Mar 2003 Location: Columbus Ohio Posts: 1,413	I bought cross-drilled and slotted rotors and titanium ti pads from JC. Whitney that I am very impressed with. The napa made in usa upscale rotors are pretty good as well. Performance Friction carbon metallic pads work very well, but they dust like you would not believe.......I had to clean my wheels every 3 days with those pads.

07-13-2003, 01:31 PM	#4
Krosati Registered User Join Date: Jul 2003 Location: Texas Posts: 49	I just bought front and rear setups from O'Rielly Auto Parts and was given 2 options. Cheap or better. The cheap came from Mexico and the the Others wer made in Canada. After comparing the two in the store. I went with the Canandian made parts. They were much thicker, nicely finished castings that looked VERY close to the OEM pieces I removed. The calipers were preloaded with metallic pads, the rotors came with studs and races installed. The rear drums were beefy and included the knockout rubber plugs. I was pretty pleased with the overall quality. Total cost for calipers, rotors, drums, shoes, a wheel cylinder, drivers ebrake cable, 2 cans brake cleaner, and a quart of fluid = $354

07-13-2003, 02:40 PM	#5
Mike76251 Senior Member Join Date: Mar 2003 Posts: 2,499	I second the Pep Boys warning on their $40 rotors..........they warp in no time. So do GM's from my experience. Performance Friction carbon metallic pads last a VERY long time but they do dust alot and are hard on rotors.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.