Trucks for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**STP67-72** · 07-13-2003, 10:22 AM

I have way to many trucks and projects for one person. I am not doing this full time know and there is not enough time. I still have the nice 72 super cheyeene 20. Nice rust free and all original sheetmetal. Original rockers, cab corners and floorpans, etc. Lots of new parts, from radiator, carb and complete interior. Lot of new parts and a nice daily driver. I sold it for about $9500.00 the first time i sold it and have spent about 1500.00 on it since then. Asking $8500.00
I also have a 71 lwb cheyeene 10 402bb, 400 cold air drive it anywhere. Nice rust free body. Taigate bad. Ugly paint. but great body. About 40000 on engine and about 10000on trans. I bought the truck from freind a few months ago to make me a swb nice driver and not to sell it like i always do. But i really want a 72 cheyenne or a super. This truck has tilt, alum. intake, eldebrock, and coated headers and nice exhaust. Ugly but great body. I will take my money out of it are consider trades on 72 long or short.
$3800.00
I also have a 71 swb 4x4 poject truck that i have had stashed for about 5 years. 350, 4 speed, disc, p/s, p/b non air. Some one started putting ac vents in it. This is a rolling project, on rallies and good tires. Needs frame up. I also have extra front disc set up and a auto set up out of a 72 blazer, I will take 3500.00. That is about what i have in it. I will also consider 67-72 trades.
I also have a nice rust free 68 step that i am building to sell in the next few months. Not a frame up but real close. Fresh 327, 350 p/s, p/b, non ac. I might install a vintage that i have stashed for a 69 that i am also working on. New paint inside and out. New interior, bumpers, complete wood kit, tailgate, windshield, all weatherstripping,etc,etc, It will probably be a 10000.00-12000.00 truck when finished. If anybody is interested in a turn key job. It is the original med. blue met. The only thing i had to change on cab and doors, was a rocker that looked like it got bent on a lowboy that it did not fit on. PERFECT floorpans and KICKPANELS. Will consider trades when finished for a 72 driver or project. Prefer swb, but will take a nice lwb to cut. Cheyenne or super.
I also have a nice 69 swb fleet that i am going to get back on after the 68. That i put in front of because it was quicker. It will be a frame up. Fresh 350, Probably a 700r, tilt, tack. p/s, p/b disc, 5 lug, vintage or old air. This was a 3500.00 body when i tore it down and started on it. It will probably have a metal floor bed, because i am keeping the original wood bed that is perfect and has brand new wood and ss strips in it. I hope to have this truck finished in about a year. I will build it the way you want it if interested. This truck is med. red with white top. Lower chrome. This truck will be new.
I am also putting a 71 swb gmc back together that i tore down about 4 years ago to do a frame off on. It was in a paint shop off and on for paint and bodywork for a couple years. I am having to make time to completely install everthing on body. It has everthing but cargo light and headliner. All new gm chrome i sold him about 6 years ago. The last one for a customer!!!!!!!!!!!!!!
This is just to much with a regular job. I will consider any decent offers. Let me know if interested. I want a 72 i can build, drive and enjoy.
Thanks Steve

ginter · 07-13-2003, 09:55 PM

I'd like to see some pics of the 71 lwb cheyeene 10 402bb, 400

I might possibly consider some sort of swap on this truck: 72 Cheyenne 10 lwb 350/350

**STP67-72** · 07-13-2003, 10:57 PM

I will get some pics. together on these trucks. I took some of the bed i took apart today, but ran out of daylight on the trucks. Give me a couple days on it. It is ugly but solid. I forgot about new windsheild. Toolbox bed, with a little rust under the door that i saw today. I also picked up a nice original 72 lwb today, with the front end knocked off. Probably what i will use for me a 72 short. Original cheyenne smallblock, black , withblue interior. I will post pics. as soon as possible.

**STP67-72** · 07-15-2003, 11:13 PM

ttt

ginter · 07-15-2003, 11:49 PM

Do you have any pics yet? Are you interested in the possible trade I mentioned in my previous reply?

**STP67-72** · 07-16-2003, 06:41 AM

I am worying on pics. I have been real buzy with truck parts. (It always comes in spirts). I also sold about 12 parts trucks, 5 swb beds, a cab and a bunch of parts to a man in Houston. He picks up 1-2 loads a week. Also getting rain from hurricane. I will consider all trades. Thanks Steve 409 722-6929 if you want to call in evenings.

**STP67-72** · 07-18-2003, 11:43 PM

ttt

ginter · 07-18-2003, 11:50 PM

Any pics yet?

07-13-2003, 10:22 AM	#1
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,668	Trucks for sale I have way to many trucks and projects for one person. I am not doing this full time know and there is not enough time. I still have the nice 72 super cheyeene 20. Nice rust free and all original sheetmetal. Original rockers, cab corners and floorpans, etc. Lots of new parts, from radiator, carb and complete interior. Lot of new parts and a nice daily driver. I sold it for about $9500.00 the first time i sold it and have spent about 1500.00 on it since then. Asking $8500.00 I also have a 71 lwb cheyeene 10 402bb, 400 cold air drive it anywhere. Nice rust free body. Taigate bad. Ugly paint. but great body. About 40000 on engine and about 10000on trans. I bought the truck from freind a few months ago to make me a swb nice driver and not to sell it like i always do. But i really want a 72 cheyenne or a super. This truck has tilt, alum. intake, eldebrock, and coated headers and nice exhaust. Ugly but great body. I will take my money out of it are consider trades on 72 long or short. $3800.00 I also have a 71 swb 4x4 poject truck that i have had stashed for about 5 years. 350, 4 speed, disc, p/s, p/b non air. Some one started putting ac vents in it. This is a rolling project, on rallies and good tires. Needs frame up. I also have extra front disc set up and a auto set up out of a 72 blazer, I will take 3500.00. That is about what i have in it. I will also consider 67-72 trades. I also have a nice rust free 68 step that i am building to sell in the next few months. Not a frame up but real close. Fresh 327, 350 p/s, p/b, non ac. I might install a vintage that i have stashed for a 69 that i am also working on. New paint inside and out. New interior, bumpers, complete wood kit, tailgate, windshield, all weatherstripping,etc,etc, It will probably be a 10000.00-12000.00 truck when finished. If anybody is interested in a turn key job. It is the original med. blue met. The only thing i had to change on cab and doors, was a rocker that looked like it got bent on a lowboy that it did not fit on. PERFECT floorpans and KICKPANELS. Will consider trades when finished for a 72 driver or project. Prefer swb, but will take a nice lwb to cut. Cheyenne or super. I also have a nice 69 swb fleet that i am going to get back on after the 68. That i put in front of because it was quicker. It will be a frame up. Fresh 350, Probably a 700r, tilt, tack. p/s, p/b disc, 5 lug, vintage or old air. This was a 3500.00 body when i tore it down and started on it. It will probably have a metal floor bed, because i am keeping the original wood bed that is perfect and has brand new wood and ss strips in it. I hope to have this truck finished in about a year. I will build it the way you want it if interested. This truck is med. red with white top. Lower chrome. This truck will be new. I am also putting a 71 swb gmc back together that i tore down about 4 years ago to do a frame off on. It was in a paint shop off and on for paint and bodywork for a couple years. I am having to make time to completely install everthing on body. It has everthing but cargo light and headliner. All new gm chrome i sold him about 6 years ago. The last one for a customer!!!!!!!!!!!!!! This is just to much with a regular job. I will consider any decent offers. Let me know if interested. I want a 72 i can build, drive and enjoy. Thanks Steve

07-13-2003, 09:55 PM	#2
ginter Registered User Join Date: Mar 2003 Location: Denver CO. Posts: 156	I'd like to see some pics of the 71 lwb cheyeene 10 402bb, 400 I might possibly consider some sort of swap on this truck: 72 Cheyenne 10 lwb 350/350 __________________ Mike 67 C20 Camper Special - Rust Free! 1970 Porsche 914/6

07-15-2003, 11:49 PM	#5
ginter Registered User Join Date: Mar 2003 Location: Denver CO. Posts: 156	Do you have any pics yet? Are you interested in the possible trade I mentioned in my previous reply? __________________ Mike 67 C20 Camper Special - Rust Free! 1970 Porsche 914/6

07-18-2003, 11:50 PM	#8
ginter Registered User Join Date: Mar 2003 Location: Denver CO. Posts: 156	Any pics yet? __________________ Mike 67 C20 Camper Special - Rust Free! 1970 Porsche 914/6

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-13-2003, 10:57 PM	#3
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,668	I will get some pics. together on these trucks. I took some of the bed i took apart today, but ran out of daylight on the trucks. Give me a couple days on it. It is ugly but solid. I forgot about new windsheild. Toolbox bed, with a little rust under the door that i saw today. I also picked up a nice original 72 lwb today, with the front end knocked off. Probably what i will use for me a 72 short. Original cheyenne smallblock, black , withblue interior. I will post pics. as soon as possible.

07-15-2003, 11:13 PM	#4
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,668	ttt

07-16-2003, 06:41 AM	#6
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,668	I am worying on pics. I have been real buzy with truck parts. (It always comes in spirts). I also sold about 12 parts trucks, 5 swb beds, a cab and a bunch of parts to a man in Houston. He picks up 1-2 loads a week. Also getting rain from hurricane. I will consider all trades. Thanks Steve 409 722-6929 if you want to call in evenings.

07-18-2003, 11:43 PM	#7
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,668	ttt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.