LA WTB: SWB Lower Trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 04-02-2011, 06:20 PM

Prefer black, all four pieces. Can also use the two rear pieces in woodgrain. Useable, but not perfect condition.

Please let me know what you have.

Thanks -Chris
Posted via Mobile Device

gringoloco · 04-04-2011, 02:06 AM

Still looking. Could use a LWB passenger rear piece, too...

gringoloco · 04-05-2011, 02:56 PM

Lower molding? Anyone?

Posted via Mobile Device

BB72CHEVKT · 04-05-2011, 03:26 PM

Remember to make sure it is not repop. I just bought an almost complete set of upper and lower in black from a board member and never asked. Sure enough it came in and it was repop, no wonder it looked so good in the pics.

kellytheaker · 04-05-2011, 04:28 PM

just so we are all aware - what quality deficiencies on comparison if you wouldnt mind explaining

BB72CHEVKT · 04-05-2011, 04:41 PM

Quote:

Originally Posted by kellytheaker

just so we are all aware - what quality deficiencies on comparison if you wouldnt mind explaining

it looks good just not what I expected

gringoloco · 04-05-2011, 09:36 PM

Actually doesn't much matter to me. I'd prefer original, but could work with reproduced. Thanks for the info.

Wanna sell yours?

gringoloco · 04-09-2011, 12:19 AM

bumpedy-bump

gringoloco · 04-10-2011, 11:36 PM

Still looking for a passenger rear piece. 69-72. Long or short, black or woodgrain.

Thanks -Chris

VA72C10 · 04-11-2011, 09:35 AM

I'll take a look through my box of moldings. Which do you prefer and do you want one as nice as possible or with some "patina" to match existing molding?

gringoloco · 04-11-2011, 02:28 PM

Quote:

Originally Posted by VA72C10

I'll take a look through my box of moldings. Which do you prefer and do you want one as nice as possible or with some "patina" to match existing molding?

Looking for a black, SWB, passenger rear piece with some wear, but no huge dents or holes. I can work with woodgrain or LWB as well. Or, for that matter, any workable SWB black pieces.

Thanks -Chris

gringoloco · 04-13-2011, 06:05 PM

Still looking...

VA72C10 · 04-13-2011, 09:52 PM

Here's the best piece I have. LWB passenger rear (I believe

)

If interested figure $15 shipped to basically cover shipping

VA72C10 · 04-13-2011, 09:53 PM

The hole on the end is extra of course but I figure that end would be the end you cut to make it work on swb...

gringoloco · 04-13-2011, 11:24 PM

I'll take it! Better than what I have, which is nothing... PM sent.

lynnfield · 04-17-2011, 06:11 PM

If you are still looking, I have a set posted here. I am willing to sell the box moldings seperate. Greg

http://67-72chevytrucks.com/vboard/s...d.php?t=459614

**67sss** · 04-17-2011, 06:43 PM

this came of off a 72 highlander longbed if still need any..

04-02-2011, 06:20 PM	#1
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	WTB: SWB Lower Trim Prefer black, all four pieces. Can also use the two rear pieces in woodgrain. Useable, but not perfect condition. Please let me know what you have. Thanks -Chris Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-04-2011, 02:06 AM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: WTB: SWB Lower Trim Still looking. Could use a LWB passenger rear piece, too... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-05-2011, 02:56 PM	#3
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: WTB: SWB Lower Trim Lower molding? Anyone? Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-05-2011, 03:26 PM	#4
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: WTB: SWB Lower Trim Remember to make sure it is not repop. I just bought an almost complete set of upper and lower in black from a board member and never asked. Sure enough it came in and it was repop, no wonder it looked so good in the pics. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

04-05-2011, 04:28 PM	#5
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: WTB: SWB Lower Trim just so we are all aware - what quality deficiencies on comparison if you wouldnt mind explaining

04-05-2011, 09:36 PM	#7
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: WTB: SWB Lower Trim Actually doesn't much matter to me. I'd prefer original, but could work with reproduced. Thanks for the info. Wanna sell yours? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 04-05-2011 at 09:37 PM.

04-09-2011, 12:19 AM	#8
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: WTB: SWB Lower Trim bumpedy-bump __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-10-2011, 11:36 PM	#9
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: WTB: SWB Lower Trim Still looking for a passenger rear piece. 69-72. Long or short, black or woodgrain. Thanks -Chris __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-11-2011, 09:35 AM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: WTB: SWB Lower Trim I'll take a look through my box of moldings. Which do you prefer and do you want one as nice as possible or with some "patina" to match existing molding? __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-13-2011, 06:05 PM	#12
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: WTB: SWB Lower Trim Still looking... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-13-2011, 09:52 PM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: WTB: SWB Lower Trim Here's the best piece I have. LWB passenger rear (I believe ) If interested figure $15 shipped to basically cover shipping __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-13-2011, 09:53 PM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: WTB: SWB Lower Trim The hole on the end is extra of course but I figure that end would be the end you cut to make it work on swb... __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-13-2011, 11:24 PM	#15
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: WTB: SWB Lower Trim I'll take it! Better than what I have, which is nothing... PM sent. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-17-2011, 06:11 PM	#16
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: WTB: SWB Lower Trim If you are still looking, I have a set posted here. I am willing to sell the box moldings seperate. Greg http://67-72chevytrucks.com/vboard/s...d.php?t=459614 Last edited by lynnfield; 04-17-2011 at 06:12 PM.

04-17-2011, 06:43 PM	#17
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	Re: WTB: SWB Lower Trim this came of off a 72 highlander longbed if still need any.. Attached Images



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.