fender repair panels? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

60ratrod · 05-04-2011, 08:41 AM

so where can i get fender repair panels for my passenger side front fender? i'm lookin for front and rear patch panels. i looked on lmcjunk.com and only found ones for the rear. i would mostly like to find ones for the front, since i think i can use my old passenger fender for the rear patch.

gcburdic · 05-04-2011, 09:27 PM

Try Wes...member and vendor 'ClassicHeartbeat' he's close to ya and will be able to take care of your needs

chevychase · 05-04-2011, 11:14 PM

+1 on ClassicHeartbeat. Brothers also has a nice front cup patch which has the "inner" shell unlike most of the others.

60ratrod · 05-05-2011, 02:40 AM

now that i think about it, i may need to graft the entire nose from the current fender to the replacement fender since the donor truck had some damage on the nose of the fender. but i will look into classic heartbeat and brothers as well

boundstaffpress · 05-05-2011, 09:55 AM

Impala Bob's has truck parts. Here is the front fender patch. Pretty pricey.
http://www.bobschevytrucks.com/1967-...ection-rh.html

Classic Heartbeat has them beat by $20
http://www.classicheartbeat.com/cata...nder%20tip.htm

gcburdic · 05-05-2011, 09:58 AM

Just an fyi...I bought that same patch for $40 at a swap meet from one of our vendor

60ratrod · 05-05-2011, 01:12 PM

Who was the vendor? I checked out brothers and clasic heartbeat. The patch from brothers is a lot cheaper. I might need to check out gmcpauls next.
Posted via Mobile Device

99-LS1-SS · 05-05-2011, 01:21 PM

GMC Paul sells them.

Here's a link to the image.

Here's a link to the page that the part is on. (4th from the bottom)
http://www.gmcpauls.com/Patch_Panels.htm

I apologize, I just saw that they only sell the driver's side.

gcburdic · 05-05-2011, 04:27 PM

I picked mine up from Top Banana at the Charlotte Autofair last fall....I figure since you were in WA you would be close enough to Wes at Classic Heartbeat.....just know buying from a board member not only insures that it's a part they use on their builds, so quality is what they want to sell, but they'll provided the valuable customer service that goes with it

mbgmike · 05-05-2011, 09:00 PM

Quote:

Originally Posted by 99-LS1-SS

GMC Paul sells them.

Here's a link to the image.

Here's a link to the page that the part is on. (4th from the bottom)
http://www.gmcpauls.com/Patch_Panels.htm

I apologize, I just saw that they only sell the driver's side.

thats the only one reproduced cause of the battery

05-04-2011, 08:41 AM	#1
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	fender repair panels? so where can i get fender repair panels for my passenger side front fender? i'm lookin for front and rear patch panels. i looked on lmcjunk.com and only found ones for the rear. i would mostly like to find ones for the front, since i think i can use my old passenger fender for the rear patch. __________________ ERROR 404....... SNAPPY COMEBACK NOT FOUND _______________________________________________________________________________________________ -60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination" -07 gmt900 silverado 1500 lt xcab z71, granite blue -81 suzuki gs650g "shelah"- current project -81 kz1000m1 csr "sarge" -next project (just beautification) -07 kawasaki vulcan classic vn900

05-04-2011, 09:27 PM	#2
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: fender repair panels? Try Wes...member and vendor 'ClassicHeartbeat' he's close to ya and will be able to take care of your needs __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

05-04-2011, 11:14 PM	#3
chevychase Registered User Join Date: Jun 2007 Location: Boca Raton, FL Posts: 476	Re: fender repair panels? +1 on ClassicHeartbeat. Brothers also has a nice front cup patch which has the "inner" shell unlike most of the others. __________________ Joe

05-05-2011, 02:40 AM	#4
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	Re: fender repair panels? now that i think about it, i may need to graft the entire nose from the current fender to the replacement fender since the donor truck had some damage on the nose of the fender. but i will look into classic heartbeat and brothers as well __________________ ERROR 404....... SNAPPY COMEBACK NOT FOUND _______________________________________________________________________________________________ -60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination" -07 gmt900 silverado 1500 lt xcab z71, granite blue -81 suzuki gs650g "shelah"- current project -81 kz1000m1 csr "sarge" -next project (just beautification) -07 kawasaki vulcan classic vn900

05-05-2011, 09:55 AM	#5
boundstaffpress Jamie Hyneman is my twin Join Date: Nov 2005 Location: La Junta, Colorado Posts: 705	Re: fender repair panels? Impala Bob's has truck parts. Here is the front fender patch. Pretty pricey. http://www.bobschevytrucks.com/1967-...ection-rh.html Classic Heartbeat has them beat by $20 http://www.classicheartbeat.com/cata...nder%20tip.htm __________________ Justin SOLD 1967 K10 Fleetside, 283, Front and Rear Posi SOLD Color Wiring Diagrams Now in High Resolution V8 and Cab and Cab and Chassis Last edited by boundstaffpress; 05-05-2011 at 09:57 AM.

05-05-2011, 09:58 AM	#6
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: fender repair panels? Just an fyi...I bought that same patch for $40 at a swap meet from one of our vendor __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

05-05-2011, 01:12 PM	#7
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	Re: fender repair panels? Who was the vendor? I checked out brothers and clasic heartbeat. The patch from brothers is a lot cheaper. I might need to check out gmcpauls next. Posted via Mobile Device __________________ ERROR 404....... SNAPPY COMEBACK NOT FOUND _______________________________________________________________________________________________ -60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination" -07 gmt900 silverado 1500 lt xcab z71, granite blue -81 suzuki gs650g "shelah"- current project -81 kz1000m1 csr "sarge" -next project (just beautification) -07 kawasaki vulcan classic vn900

05-05-2011, 01:21 PM	#8
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: fender repair panels? GMC Paul sells them. Here's a link to the image. Here's a link to the page that the part is on. (4th from the bottom) http://www.gmcpauls.com/Patch_Panels.htm I apologize, I just saw that they only sell the driver's side. Last edited by 99-LS1-SS; 05-05-2011 at 01:22 PM.

05-05-2011, 04:27 PM	#9
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: fender repair panels? I picked mine up from Top Banana at the Charlotte Autofair last fall....I figure since you were in WA you would be close enough to Wes at Classic Heartbeat.....just know buying from a board member not only insures that it's a part they use on their builds, so quality is what they want to sell, but they'll provided the valuable customer service that goes with it __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.