CA Cab panel molding $10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tuff Gong · 05-11-2011, 11:54 PM

I'm selling the cab back panel molding from a 71.
Daily driver quality. $10 plus shipping.
First "I'll Take It"

Tuff Gong · 05-26-2011, 01:16 AM

Ttt

**70STOVEBOLT** · 05-26-2011, 05:37 PM

Any dents/dings?

Tuff Gong · 05-26-2011, 06:14 PM

They are straight from what I can remember. It's been a while since a looked at them. I will inspect them again tonite and get back to you with the answer and a few more pictures.

Brian

68Mike · 05-26-2011, 06:18 PM

If he passes, I'll take them please.
Posted via Mobile Device

Tuff Gong · 05-27-2011, 12:17 AM

OK guys, I pulled the trim back out and took a really close look. They are straight, but they have (4) small dents. I will take a dollars off for each dent to be fair, making it $6 plus shipping. I tried to get pictures of the imperfections, but my camera is not the best. Please let me know if you are still interested. Mike, I will give 70STOVEBOLT a little time to make a decision, if he passes, I will contact you.

Brian

**70STOVEBOLT** · 05-27-2011, 01:22 PM

Brian, thanks for the additional pics, I am going to pass them to 68Mike.

Thanks,
Mark

dan s · 05-27-2011, 05:12 PM

If next inline passes,I will take them.Thanks

Tuff Gong · 05-27-2011, 06:46 PM

Quote:

Originally Posted by dan s

If next inline passes,I will take them.Thanks

Dan,

Mike is up. I will PM him and see if he still wants the trim or not. I will let you know when I find out. Talk to you later.

Brian

Tuff Gong · 05-28-2011, 06:15 PM

Quote:

Originally Posted by 68Mike

If he passes, I'll take them please.
Posted via Mobile Device

Mike are you still interested? Let me know cause there is another person interested. Thanks.

68Mike · 05-29-2011, 11:46 AM

Quote:

Originally Posted by Brian Atkinson

Mike are you still interested? Let me know cause there is another person interested. Thanks.

Sorry for the delay, yes I'm still interested in them if they're available.
Posted via Mobile Device

05-11-2011, 11:54 PM	#1
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Cab panel molding $10 I'm selling the cab back panel molding from a 71. Daily driver quality. $10 plus shipping. First "I'll Take It" Attached Images

05-26-2011, 01:16 AM	#2
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: Cab panel molding $10 Ttt

05-26-2011, 05:37 PM	#3
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,358	Re: Cab panel molding $10 Any dents/dings? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

05-26-2011, 06:14 PM	#4
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: Cab panel molding $10 They are straight from what I can remember. It's been a while since a looked at them. I will inspect them again tonite and get back to you with the answer and a few more pictures. Brian

05-26-2011, 06:18 PM	#5
68Mike Registered User Join Date: Jan 2007 Location: Salinas,Ca 93906 Posts: 502	Re: Cab panel molding $10 If he passes, I'll take them please. Posted via Mobile Device __________________ Mike Currents: '74 Cheyenne Super C30 Camper Special 3+3 aka "Sucia30" Past: '79 C10 BIG 10 (Sold) 69 CST LWB - Always a "Work in progress" true work truck (stolen) 05 GSXR 750 it has a pretty paint job _wrecked 72 SWB full frame restoration -sold! 71 CST K5 Blazer 4x4 (soon to be 2wd)-project - sold! C10 Club 2012 Brothers Show Video http://youtu.be/pUeV2vP7Wpo

05-27-2011, 12:17 AM	#6
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: Cab panel molding $10 OK guys, I pulled the trim back out and took a really close look. They are straight, but they have (4) small dents. I will take a dollars off for each dent to be fair, making it $6 plus shipping. I tried to get pictures of the imperfections, but my camera is not the best. Please let me know if you are still interested. Mike, I will give 70STOVEBOLT a little time to make a decision, if he passes, I will contact you. Brian Attached Images

05-27-2011, 01:22 PM	#7
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,358	Re: Cab panel molding $10 Brian, thanks for the additional pics, I am going to pass them to 68Mike. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

05-27-2011, 05:12 PM	#8
dan s Registered User Join Date: Jan 2010 Location: Ormond Beach Florida Posts: 156	Re: Cab panel molding $10 If next inline passes,I will take them.Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.