The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-29-2011, 09:12 PM   #1
KyleL113
Registered User
 
Join Date: May 2011
Location: Dallas Texas
Posts: 12
Slight detonation still after overheat?

1969 with a 350 overheated today i heard the detonation before i saw the guage. After i let it cool and filled it up with coolant and changed the exhaust gasket that i think was the culprit it still detonates a little under load. any suggestions. No detonation before overheat.
KyleL113 is offline   Reply With Quote
Old 05-29-2011, 09:37 PM   #2
Boog
laying low
 
Boog's Avatar
 
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,514
Re: Slight detonation still after overheat?

Find the reason for the overheat and correct it. Check timing. A blown exhaust gasket isn't the cause of overheating. Bad thermostat will.
__________________
Boog
69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver
primer is finer
91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said.

I stand for the flag and kneel at the cross
Boog is offline   Reply With Quote
Old 05-29-2011, 09:40 PM   #3
fastwillie 696969
~Rest In Peace~
 
fastwillie 696969's Avatar
 
Join Date: May 2005
Location: CALIFORNIA NOR CAL
Posts: 9,707
Re: Slight detonation still after overheat?

check the inside of your distributor for condensation from the overheating ,could be cross firing from the water/
__________________
is it fast ? it has a lighting bolt donut?


B___H please, I can remove 90% of your so called "beauty" with a kleenex
fastwillie 696969 is offline   Reply With Quote
Old 05-29-2011, 10:43 PM   #4
KyleL113
Registered User
 
Join Date: May 2011
Location: Dallas Texas
Posts: 12
Re: Slight detonation still after overheat?

the exhaust leak was not a small one. loading and unloading from the trailer high centered and pushed the header around a little. the gasket fixed the overheating but slight detonation ONLY under load. wouldn't cross firing happen at any rpm load or no load?
KyleL113 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:29 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com