Need new Tailgate! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

treeboy97 · 06-13-2011, 10:35 AM

I was on the Hot Rod Power Tour last week and was moving around in the bed and came down to hard on my repro tailgate.

I am in need of a replacement? Any suggestions on a good sturdy tailgate that can actually handle an adult standing on it.

Thanks

cdowns · 06-13-2011, 10:47 AM

great weather to go to swapmeets and look for an original tailgate//i also like the sausage subs at the swapmeets

i used to travel over 600miles to go to the springfield swapmeets

gcburdic · 06-13-2011, 11:12 AM

post a want to buy (WTB) for a nice original tailgate over in the parts forum

It's worth the extra money spent!!!

Just Curious.....was your repop gate lettered or plain?

68gmsee · 06-13-2011, 11:17 AM

I haven't seen a good one lately. The ones I saw a few years ago were at a premium. Your problem sounds like what I've heard before about some repro tailgates.

I remember reading a post where someone mentioned an idea he had of inserting a pipe across the inside of the top of the tailgate. His idea was to make a hole on either side, insert the reinforcement and mig weld in place. Sounded like a good idea but I don't know if he tried it.

flashed · 06-13-2011, 11:05 PM

If you were closer I could help you out with one.

treeboy97 · 06-14-2011, 07:02 AM

gcburdic - it was a plain tailgate, I would like to get a stamped one

I was at the Springfield swap meet over Memorial Day, didn’t see any, then again I wasn't looking that hard, at the time, mine was good.

flashed-send me a message, maybe we can work something out, thanks

**70cst** · 06-14-2011, 07:49 AM

Quote:

Originally Posted by gcburdic

post a want to buy (WTB) for a nice original tailgate over in the parts forum

It's worth the extra money spent!!!

Just Curious.....was your repop gate lettered or plain?

What he said

Longhorn Man · 06-14-2011, 09:13 AM

if you want to get a new one, give wes at Classic Heartbeat a call. I am pretty sure I remember his saying he has some that are just as thick as originals?
Otherwise, I think everyone has you covered... ship one from GA, post on the parts page, or go to the springfield swap meet.
As I'm SURE you already know... you don't want a POS Ohio tailgate.

06-13-2011, 10:35 AM	#1
treeboy97 Registered User Join Date: May 2009 Location: Waynesville, Ohio Posts: 136	Need new Tailgate! I was on the Hot Rod Power Tour last week and was moving around in the bed and came down to hard on my repro tailgate. I am in need of a replacement? Any suggestions on a good sturdy tailgate that can actually handle an adult standing on it. Thanks __________________ 1970 C10 LWB (Grandfather's Truck) 5.3 4L60E 2012 Victory Cross Country Touring I'm not wasting money on my truck/bike, I'm helping to rescue the economy one mod at a time.

06-13-2011, 10:47 AM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Need new Tailgate! great weather to go to swapmeets and look for an original tailgate//i also like the sausage subs at the swapmeets i used to travel over 600miles to go to the springfield swapmeets __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 06-13-2011 at 10:48 AM.

06-13-2011, 11:12 AM	#3
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Need new Tailgate! post a want to buy (WTB) for a nice original tailgate over in the parts forum It's worth the extra money spent!!! Just Curious.....was your repop gate lettered or plain? __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present Last edited by gcburdic; 06-13-2011 at 11:25 AM.

06-13-2011, 11:17 AM	#4
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: Need new Tailgate! I haven't seen a good one lately. The ones I saw a few years ago were at a premium. Your problem sounds like what I've heard before about some repro tailgates. I remember reading a post where someone mentioned an idea he had of inserting a pipe across the inside of the top of the tailgate. His idea was to make a hole on either side, insert the reinforcement and mig weld in place. Sounded like a good idea but I don't know if he tried it.

06-13-2011, 11:05 PM	#5
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Need new Tailgate! If you were closer I could help you out with one.

06-14-2011, 07:02 AM	#6
treeboy97 Registered User Join Date: May 2009 Location: Waynesville, Ohio Posts: 136	Re: Need new Tailgate! gcburdic - it was a plain tailgate, I would like to get a stamped one I was at the Springfield swap meet over Memorial Day, didn’t see any, then again I wasn't looking that hard, at the time, mine was good. flashed-send me a message, maybe we can work something out, thanks __________________ 1970 C10 LWB (Grandfather's Truck) 5.3 4L60E 2012 Victory Cross Country Touring I'm not wasting money on my truck/bike, I'm helping to rescue the economy one mod at a time.

06-14-2011, 09:13 AM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Need new Tailgate! if you want to get a new one, give wes at Classic Heartbeat a call. I am pretty sure I remember his saying he has some that are just as thick as originals? Otherwise, I think everyone has you covered... ship one from GA, post on the parts page, or go to the springfield swap meet. As I'm SURE you already know... you don't want a POS Ohio tailgate.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.