AL In for parts: 1971 GMC 350/AC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JQ-72** · 07-22-2011, 11:24 PM

I just brought this one in to part out. 1971 GMC Custom 350/TH350 and AC. Original paint, but it has some rust issues. Visor area has cancer, door bottoms have a little rust. Bed floor has rust up front. See anything you need? I'm keeping the vintage slots (unless some one wants to drive here and give some mad cash!!

).
Joshua

**leddzepp** · 07-22-2011, 11:31 PM

Please post prices ASAP per forum rules. Thank you!

tow guys · 07-23-2011, 12:58 AM

Interested in the passenger fender pending condition and shipping cost to zip 08721
Posted via Mobile Device

tow guys · 07-23-2011, 01:00 AM

Oh yeah, and the front bumper with mounting brackets too.
Thanks,
Tony
Posted via Mobile Device

botmfedr1 · 07-23-2011, 06:49 AM

Is that an original fan shroud? If so, put me first in line....how much shipped to 79908?

Oh, and all the ac brackets, does it have all of them? , how much shipped?

thanks,
Mondo

badboy007 · 07-23-2011, 12:49 PM

Interested in both front fenders pending price and condition
Posted via Mobile Device

**w314speed** · 07-23-2011, 01:38 PM

second in line for front bumper!

72cheyenneman · 07-23-2011, 01:55 PM

How much for the spark plug heat shields and the small 2-wire spark plug retainers (there should be 4 of them); and could I get a picture of them also? I need these parts so I can restore them for my project. Thanks, Casey

**FL71C10** · 07-23-2011, 02:07 PM

How much for the power steering pump, pulley, and brackets ahd hoses?

Shipped to 32803 business address.

Thanks!

FrankC · 07-23-2011, 03:00 PM

interested in both doors - when you can get a moment - pics of rust area.

**JQ-72** · 07-23-2011, 07:59 PM

OK guys, I've been cutting grass all day! Here's more info:

Ledzepp - I'm aware of the rules and was going to post prices as soon as someone tells me what they want.
tow guys / w314speed - Pass. side fender does have some cancer at the bottom under the battery (pic). Bumper is perfectly straight with no dents at all. But there is a spot where the chrome is flaking off. $100 + shipping for bumper and brackets.
botmfedr1 - fan shroud $40, complete SBC A/C bracket set (7pcs) $100. prices + shipping.
72 Cheyenneman - I have all shields, retainers you are needing - $40 shipped to you.
FL71C-10 - power steering components - $125 shipped to you.
FrankC - doors look great on the outside, inside corners look good. rust on both bottoms (see pics) - $150 for the pair (bare doors), $200 complete with 4 good regulators. No shipping unless you arrange.
badboy007 - L side fender is perfect, R side has rust on the bottom under battery. L fender - $75, R fender - $50 + shipping.

**leddzepp** · 07-23-2011, 09:12 PM

Thank you for posting prices. Your cooperation is appreciated.

tow guys · 07-23-2011, 09:57 PM

I'm gonna pass on both the fender and the bumper. I'm looking for a no metal work needed fender. The shipping on the bumper plus the 100$ asking price is out of my reach. Thanks.
Posted via Mobile Device

72cheyenneman · 07-23-2011, 10:24 PM

JQ...I will take the heat shields and spark plug retainers, along with the hardware/fasteners that go with them; but could you send me some pictures first? I'm looking for very nice heat shields that can be restored for a correct restoration. Thanks, Casey

truknut · 07-23-2011, 11:10 PM

How good is the seat? If in good shape how much?

**FL71C10** · 07-23-2011, 11:32 PM

I'll pass. Thanks though.

**JQ-72** · 07-23-2011, 11:37 PM

Hey Jeff, the seat looks real good. Come on over and take a look.
Joshua

FrankC · 07-24-2011, 04:20 AM

Thanks for the pics. Are both doors identical with rust? I have two here that look the same. Can I get a shot of the other inside door?

Thank you for posting pics after cutting grass in the swelter.

Frank

HDBOB · 07-24-2011, 10:36 AM

Hi,
Interested in the head light bezels and fender emblems. Could you post some pics ?
Thanks,

*Shane* · 07-24-2011, 02:13 PM

you don't really want those slots ... they are a pain to keep clean ... I'll take them off your hands should you come to your senses and decide to get rid of them.

seriously, if you decide to let 'em go ... keep me in mind!

truknut · 07-24-2011, 06:08 PM

Josh, I work for a wrecker company. So I'm on call right now. I should be off the first weekend in August, if you still have it then I will come and take a look.. Thanks.

**RenoKeene** · 07-25-2011, 08:57 AM

Interested in the AC box that holds the evaporator. Mine looked perfect untill I pulled it off the firewall and found the metal right below the evap was rusted away. If its in good shape when you pull it price shipped to 34731 FL. I'd like to see pics first please.
Thanks

**RenoKeene** · 07-25-2011, 03:19 PM

Quote:

Originally Posted by RenoKeene

Interested in the AC box that holds the evaporator. Mine looked perfect untill I pulled it off the firewall and found the metal right below the evap was rusted away. If its in good shape when you pull it price shipped to 34731 FL. I'd like to see pics first please.
Thanks

I found what I needed, thanks.
Nice parts truck!

67gmcstepside · 07-25-2011, 05:11 PM

looking for a working distributor.

**JQ-72** · 07-25-2011, 10:08 PM

FrankC - other door is in same condition (pic added)
72Cheyenneman - pic. added of shields.
HDBob - I pulled the bezels and ran a SOS pad across them and - WOW! This is by far the best set I've had. No dents or pings at all. They have an awesome shine. They are not new, but definitely don't show their age. Look at pics! $80 + shipping. I'll throw the GMC emblems in if you buy the bezels.
67 GMC stepside - good working mechanical distributor,cap & coil - $40 shipped to you.
Tow guys or W314speed. How about $75 + shipping the bumper and brackets? Perfect bumper to re-plate. Better than the paper-thin re-pops.

07-22-2011, 11:24 PM	#1
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	In for parts: 1971 GMC 350/AC I just brought this one in to part out. 1971 GMC Custom 350/TH350 and AC. Original paint, but it has some rust issues. Visor area has cancer, door bottoms have a little rust. Bed floor has rust up front. See anything you need? I'm keeping the vintage slots (unless some one wants to drive here and give some mad cash!!). Joshua Attached Images __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

07-22-2011, 11:31 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: In for parts: 1971 GMC 350/AC Please post prices ASAP per forum rules. Thank you! __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

07-23-2011, 12:58 AM	#3
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: In for parts: 1971 GMC 350/AC Interested in the passenger fender pending condition and shipping cost to zip 08721 Posted via Mobile Device __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

07-23-2011, 01:00 AM	#4
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: In for parts: 1971 GMC 350/AC Oh yeah, and the front bumper with mounting brackets too. Thanks, Tony Posted via Mobile Device __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

07-23-2011, 06:49 AM	#5
botmfedr1 Registered User Join Date: Feb 2008 Location: Harlingen, TX Posts: 1,096	Re: In for parts: 1971 GMC 350/AC Is that an original fan shroud? If so, put me first in line....how much shipped to 79908? Oh, and all the ac brackets, does it have all of them? , how much shipped? thanks, Mondo Last edited by botmfedr1; 07-23-2011 at 06:56 AM.

07-23-2011, 12:49 PM	#6
badboy007 Registered User Join Date: Dec 2006 Location: Canton, GA Posts: 386	Re: In for parts: 1971 GMC 350/AC Interested in both front fenders pending price and condition Posted via Mobile Device

07-23-2011, 01:38 PM	#7
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: In for parts: 1971 GMC 350/AC second in line for front bumper!

07-23-2011, 01:55 PM	#8
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: In for parts: 1971 GMC 350/AC How much for the spark plug heat shields and the small 2-wire spark plug retainers (there should be 4 of them); and could I get a picture of them also? I need these parts so I can restore them for my project. Thanks, Casey

07-23-2011, 02:07 PM	#9
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: In for parts: 1971 GMC 350/AC How much for the power steering pump, pulley, and brackets ahd hoses? Shipped to 32803 business address. Thanks! __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

07-23-2011, 03:00 PM	#10
FrankC Registered User Join Date: Sep 2001 Location: Raleigh, NC USA Posts: 155	Re: In for parts: 1971 GMC 350/AC interested in both doors - when you can get a moment - pics of rust area. __________________ Thanks, Frank

07-23-2011, 07:59 PM	#11
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	Re: In for parts: 1971 GMC 350/AC OK guys, I've been cutting grass all day! Here's more info: Ledzepp - I'm aware of the rules and was going to post prices as soon as someone tells me what they want. tow guys / w314speed - Pass. side fender does have some cancer at the bottom under the battery (pic). Bumper is perfectly straight with no dents at all. But there is a spot where the chrome is flaking off. $100 + shipping for bumper and brackets. botmfedr1 - fan shroud $40, complete SBC A/C bracket set (7pcs) $100. prices + shipping. 72 Cheyenneman - I have all shields, retainers you are needing - $40 shipped to you. FL71C-10 - power steering components - $125 shipped to you. FrankC - doors look great on the outside, inside corners look good. rust on both bottoms (see pics) - $150 for the pair (bare doors), $200 complete with 4 good regulators. No shipping unless you arrange. badboy007 - L side fender is perfect, R side has rust on the bottom under battery. L fender - $75, R fender - $50 + shipping. Attached Images __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

07-23-2011, 09:12 PM	#12
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: In for parts: 1971 GMC 350/AC Thank you for posting prices. Your cooperation is appreciated. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

07-23-2011, 09:57 PM	#13
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: In for parts: 1971 GMC 350/AC I'm gonna pass on both the fender and the bumper. I'm looking for a no metal work needed fender. The shipping on the bumper plus the 100$ asking price is out of my reach. Thanks. Posted via Mobile Device __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

07-23-2011, 10:24 PM	#14
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: In for parts: 1971 GMC 350/AC JQ...I will take the heat shields and spark plug retainers, along with the hardware/fasteners that go with them; but could you send me some pictures first? I'm looking for very nice heat shields that can be restored for a correct restoration. Thanks, Casey

07-23-2011, 11:10 PM	#15
truknut Registered User Join Date: Oct 2005 Location: Florence, AL (NW Alabama) Posts: 307	Re: In for parts: 1971 GMC 350/AC How good is the seat? If in good shape how much? __________________ 1990 Chevy Silverado (My DD) 1978 Chevy Bonanza LWB (My LWB to SWB 1 day project) 2015 Hyundai Sonata (Wife's DD)



Register or Log In To remove these advertisements.

07-23-2011, 11:32 PM	#16
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: In for parts: 1971 GMC 350/AC I'll pass. Thanks though. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

07-23-2011, 11:37 PM	#17
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	Re: In for parts: 1971 GMC 350/AC Hey Jeff, the seat looks real good. Come on over and take a look. Joshua __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

07-24-2011, 04:20 AM	#18
FrankC Registered User Join Date: Sep 2001 Location: Raleigh, NC USA Posts: 155	Re: In for parts: 1971 GMC 350/AC Thanks for the pics. Are both doors identical with rust? I have two here that look the same. Can I get a shot of the other inside door? Thank you for posting pics after cutting grass in the swelter. Frank __________________ Thanks, Frank

07-24-2011, 10:36 AM	#19
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: In for parts: 1971 GMC 350/AC Hi, Interested in the head light bezels and fender emblems. Could you post some pics ? Thanks,

07-24-2011, 02:13 PM	#20
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: In for parts: 1971 GMC 350/AC you don't really want those slots ... they are a pain to keep clean ... I'll take them off your hands should you come to your senses and decide to get rid of them. seriously, if you decide to let 'em go ... keep me in mind!

07-24-2011, 06:08 PM	#21
truknut Registered User Join Date: Oct 2005 Location: Florence, AL (NW Alabama) Posts: 307	Re: In for parts: 1971 GMC 350/AC Josh, I work for a wrecker company. So I'm on call right now. I should be off the first weekend in August, if you still have it then I will come and take a look.. Thanks. __________________ 1990 Chevy Silverado (My DD) 1978 Chevy Bonanza LWB (My LWB to SWB 1 day project) 2015 Hyundai Sonata (Wife's DD)

07-25-2011, 08:57 AM	#22
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,028	Re: In for parts: 1971 GMC 350/AC Interested in the AC box that holds the evaporator. Mine looked perfect untill I pulled it off the firewall and found the metal right below the evap was rusted away. If its in good shape when you pull it price shipped to 34731 FL. I'd like to see pics first please. Thanks __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

07-25-2011, 05:11 PM	#24
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: In for parts: 1971 GMC 350/AC looking for a working distributor.

07-25-2011, 10:08 PM	#25
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	Re: In for parts: 1971 GMC 350/AC FrankC - other door is in same condition (pic added) 72Cheyenneman - pic. added of shields. HDBob - I pulled the bezels and ran a SOS pad across them and - WOW! This is by far the best set I've had. No dents or pings at all. They have an awesome shine. They are not new, but definitely don't show their age. Look at pics! $80 + shipping. I'll throw the GMC emblems in if you buy the bezels. 67 GMC stepside - good working mechanical distributor,cap & coil - $40 shipped to you. Tow guys or W314speed. How about $75 + shipping the bumper and brackets? Perfect bumper to re-plate. Better than the paper-thin re-pops. Attached Images __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.