GA WTT - Brand New set of 13" wilwood disc breaks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

funkytechmonkey · 08-14-2011, 01:54 AM

SOLD

Here is the set of breaks... I bought them from summit and they sent me the wrong set. I waited too long to send them back and now I am stuck with them. They were mounted for about and hour and taken off. These are the flat rotors NOT the drilled and slotted. I paid over $700 for them brand new. Shipping is around $30-40 in the lower 48. They are all boxed up and I can ship.

Here is the link from Summit.
http://www.summitracing.com/parts/WI...094D/?rtype=10

Let me know if you have any questions.

tr69c10 · 08-14-2011, 03:10 AM

I got a Corvette reared
Posted via Mobile Device

belowme51 · 08-14-2011, 01:03 PM

are these the ones you put on the truck already?

funkytechmonkey · 08-14-2011, 02:13 PM

no... the ones I put on the truck are drilled and slotted. these rotors are flat.

Quote:

Originally Posted by tr69c10

I got a Corvette reared
Posted via Mobile Device

Ive got a good rear end.. thanks

belowme51 · 08-14-2011, 02:20 PM

gotcha, thanks for the reply

**Hart_Rod** · 08-14-2011, 09:49 PM

R u willing to trade straight up for the headers?

smokinstang70 · 08-14-2011, 10:06 PM

I don't have anything to trade, but would be willing to buy to $550 worth of something and trade.

belowme51 · 08-15-2011, 08:27 PM

just incase you did not get my email. of course I will make sure all is clean and perrrrty for ya!!
thanks,
Mike

funkytechmonkey · 08-15-2011, 09:15 PM

This package is 50lbs... its gonna cost me a pretty penny to ship them. I have the receipt saying I paid $709 for these breaks. They have never been taken out of the box except to take pics and look at them. I dont expect to get 700 for them... but I would like to at least get $600 and I will cover the shipping cost to the lower 48.

I have the red set of drilled and slotted on the frame I am building and these things look soooo sweet.

Here are a few pics...

**Hart_Rod** · 08-15-2011, 09:20 PM

Quote:

Originally Posted by funkytechmonkey

This package is 50lbs... its gonna cost me a pretty penny to ship them. I have the receipt saying I paid $709 for these breaks. They have never been taken out of the box except to take pics and look at them. I dont expect to get 700 for them... but I would like to at least get $600 and I will cover the shipping cost to the lower 48.

I have the red set of drilled and slotted on the frame I am building and these things look soooo sweet.

Here are a few pics...

So $50 and the headers?

funkytechmonkey · 08-15-2011, 09:29 PM

sent you a PM

smokinstang70 · 08-15-2011, 09:49 PM

how about $550.00 cash and I'll pick them up?

**Hart_Rod** · 08-15-2011, 09:54 PM

Quote:

Originally Posted by funkytechmonkey

sent you a PM

PM returned. Shoot me your email. Do you have the part# to the front kit that matches?

funkytechmonkey · 08-15-2011, 10:09 PM

I didnt go with a drop spindle in the front so my setup is a little different. I had performance online make me a set of their factory spindles that will fit the willwood calipers with a 12.5" (I think) rotor.

**Hart_Rod** · 08-15-2011, 10:27 PM

Quote:

Originally Posted by funkytechmonkey

I didnt go with a drop spindle in the front so my setup is a little different. I had performance online make me a set of their factory spindles that will fit the willwood calipers with a 12.5" (I think) rotor.

What's the part # of the rear kit?

smokinstang70 · 08-15-2011, 10:50 PM

I have the black wilwood d52 caliper on the front... this would complete the set-up. I could do $550.00 picked up in the ATL.

Didn't realize Hart_Rod was interested in the calipers as well... let me know if he backs decides to pass. I'll take them if he does.

Thanks

smokinstang70 · 08-18-2011, 09:51 AM

funkytechmonkey - any update?

funkytechmonkey · 08-20-2011, 01:53 PM

I PMed you...

I have had a few good offers for these but still leaving my options open. Anyone else have something for trade?

New airride or acuair stuff would be perfect!

funkytechmonkey · 09-02-2011, 11:46 AM

Still for sale...

funkytechmonkey · 11-21-2011, 02:10 PM

back up for sale.... any takers?

funkytechmonkey · 12-31-2011, 09:09 AM

Bump

funkytechmonkey · 01-03-2012, 03:23 PM

Trades looking for...

New or like new:

Wood bed kit
Bed side panels
EFI for 350ci
American Autowire Kit
Wilwood Mater Cylinder
Aluminum Heads 250ci
Bear Claw power locks
Power Window kit

Or.... $500 and I will cover shipping.

**paul mora** · 01-03-2012, 04:16 PM

I have a new power window kit would you be interested and do they have a emergency brake
Posted via Mobile Device

funkytechmonkey · 01-03-2012, 05:27 PM

Yea I would... Could you send me the details on the kit?

And yes it has the ebreak. the only bad thing about this kit is it doesnt come with any cables or hoses. I dont know why wilwood did that.
Posted via Mobile Device

**paul mora** · 01-03-2012, 05:44 PM

This is a photo of the box same as classic instudries and it comes with a 2window switch and harness. Co you have a estimate on the cable and hose cost?

08-14-2011, 01:54 AM	#1
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	WTT - Brand New set of 13" wilwood disc breaks SOLD Here is the set of breaks... I bought them from summit and they sent me the wrong set. I waited too long to send them back and now I am stuck with them. They were mounted for about and hour and taken off. These are the flat rotors NOT the drilled and slotted. I paid over $700 for them brand new. Shipping is around $30-40 in the lower 48. They are all boxed up and I can ship. Here is the link from Summit. http://www.summitracing.com/parts/WI...094D/?rtype=10 Let me know if you have any questions. __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build Last edited by funkytechmonkey; 01-05-2012 at 11:51 AM.

08-14-2011, 03:10 AM	#2
tr69c10 Registered User Join Date: Feb 2008 Location: bellflower ca Posts: 370	Re: WTT - Brand New set of 13" wilwood disc breaks I got a Corvette reared Posted via Mobile Device

08-14-2011, 01:03 PM	#3
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: WTT - Brand New set of 13" wilwood disc breaks are these the ones you put on the truck already?

08-14-2011, 02:20 PM	#5
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: WTT - Brand New set of 13" wilwood disc breaks gotcha, thanks for the reply

08-14-2011, 09:49 PM	#6
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: WTT - Brand New set of 13" wilwood disc breaks R u willing to trade straight up for the headers? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

08-14-2011, 10:06 PM	#7
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: WTT - Brand New set of 13" wilwood disc breaks I don't have anything to trade, but would be willing to buy to $550 worth of something and trade. __________________ "Love Affair" Build Thread

08-15-2011, 08:27 PM	#8
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: WTT - Brand New set of 13" wilwood disc breaks just incase you did not get my email. of course I will make sure all is clean and perrrrty for ya!! thanks, Mike Attached Images

08-15-2011, 09:15 PM	#9
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: WTT - Brand New set of 13" wilwood disc breaks This package is 50lbs... its gonna cost me a pretty penny to ship them. I have the receipt saying I paid $709 for these breaks. They have never been taken out of the box except to take pics and look at them. I dont expect to get 700 for them... but I would like to at least get $600 and I will cover the shipping cost to the lower 48. I have the red set of drilled and slotted on the frame I am building and these things look soooo sweet. Here are a few pics... Attached Images __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

08-15-2011, 09:29 PM	#11
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: WTT - Brand New set of 13" wilwood disc breaks sent you a PM __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

08-15-2011, 09:49 PM	#12
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: WTT - Brand New set of 13" wilwood disc breaks how about $550.00 cash and I'll pick them up? __________________ "Love Affair" Build Thread

08-15-2011, 10:09 PM	#14
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: WTT - Brand New set of 13" wilwood disc breaks I didnt go with a drop spindle in the front so my setup is a little different. I had performance online make me a set of their factory spindles that will fit the willwood calipers with a 12.5" (I think) rotor. __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

08-15-2011, 10:50 PM	#16
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: WTT - Brand New set of 13" wilwood disc breaks I have the black wilwood d52 caliper on the front... this would complete the set-up. I could do $550.00 picked up in the ATL. Didn't realize Hart_Rod was interested in the calipers as well... let me know if he backs decides to pass. I'll take them if he does. Thanks __________________ "Love Affair" Build Thread

08-18-2011, 09:51 AM	#17
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: WTT - Brand New set of 13" wilwood disc breaks funkytechmonkey - any update? __________________ "Love Affair" Build Thread

08-20-2011, 01:53 PM	#18
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: WTT - Brand New set of 13" wilwood disc breaks I PMed you... I have had a few good offers for these but still leaving my options open. Anyone else have something for trade? New airride or acuair stuff would be perfect! __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

09-02-2011, 11:46 AM	#19
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: WTT - Brand New set of 13" wilwood disc breaks Still for sale... __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build Last edited by funkytechmonkey; 11-21-2011 at 02:03 PM.



Register or Log In To remove these advertisements.

11-21-2011, 02:10 PM	#20
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: WTT - Brand New set of 13" wilwood disc breaks back up for sale.... any takers? __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

12-31-2011, 09:09 AM	#21
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: WTT - Brand New set of 13" wilwood disc breaks Bump __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

01-03-2012, 03:23 PM	#22
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: WTT - Brand New set of 13" wilwood disc breaks Trades looking for... New or like new: Wood bed kit Bed side panels EFI for 350ci American Autowire Kit Wilwood Mater Cylinder Aluminum Heads 250ci Bear Claw power locks Power Window kit Or.... $500 and I will cover shipping. __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

01-03-2012, 04:16 PM	#23
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: WTT - Brand New set of 13" wilwood disc breaks I have a new power window kit would you be interested and do they have a emergency brake Posted via Mobile Device __________________ Pulatoy Last edited by paul mora; 01-03-2012 at 04:22 PM.

01-03-2012, 05:27 PM	#24
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: WTT - Brand New set of 13" wilwood disc breaks Yea I would... Could you send me the details on the kit? And yes it has the ebreak. the only bad thing about this kit is it doesnt come with any cables or hoses. I dont know why wilwood did that. Posted via Mobile Device __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

01-03-2012, 05:44 PM	#25
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: WTT - Brand New set of 13" wilwood disc breaks This is a photo of the box same as classic instudries and it comes with a 2window switch and harness. Co you have a estimate on the cable and hose cost? Attached Images __________________ Pulatoy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.